Pro-tec Algo-Tec 6500 Manuale utente

Protec Fire Detection plc, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT, ENGLAND

+44 (0) 1282 717171 www.protec.co.uk [email protected]

Algo-Tec™ 6500/6600

INTERACTIVE ADDRESSABLE

FIRE CONTROL SYSTEM

(1-4 LOOPS)

USER MANUAL

Document Revision Details

Issue

Modification Detail

Author

Date

Removed technical specifications

25/10/2016

Revision of images

Revision of testing section 2

09/12/2016

3.1

Updated screenshots

14/09/2017

3.2

Revision of images

Group sections 13.7 &13.8 updated

Weekly Test section removed

11/12/2017

Notice

This manual may be revised as a result of enhancements to the system software or hardware. Check

for revisions to this manual, and download them, from the website www.protec.co.uk

Table of Contents

DOCUMENT REVISION DETAILS ..............................................................................................................2

INTRODUCTION .......................................................................................................................................6

PROTEC MANUFACTURED ALGO-TEC™ 6000 EQUIPMENT 5 YEAR WARRANTY ...................................7

1.0 USER RESPONSIBILITIES ...............................................................................................................8

1.1 Requirements of the Premises Management Named Person...............................................................8

2.0 ROUTINE TESTING OF THE SYSTEM ..............................................................................................9

2.1 Daily Inspection ..........................................................................................................................................9

2.2 Weekly Test ..................................................................................................................................................9

2.3 Monthly Test................................................................................................................................................9

3.0 ACCESS LEVELS .............................................................................................................................10

3.1 Access Level 1 (General User)..................................................................................................................10

3.2 Access Level 2 (Authorised / Trained User)............................................................................................10

3.3 Access Level 3a (Exchange Loop Devices)..............................................................................................10

4.0 INDICATIONS AND CONTROLS...................................................................................................11

4.1 LCD (Liquid Crystal Display) ....................................................................................................................11

4.2 General Indications..................................................................................................................................11

4.3 Status Indications.....................................................................................................................................11

4.4 Zone Indications .......................................................................................................................................11

5.0 FIRE INDICATIONS ......................................................................................................................12

5.1 General Fire Indicator Illuminated ........................................................................................................12

5.2 Zone Indicator Flashing Red ...................................................................................................................12

6.0 FAULT INDICATIONS ...................................................................................................................13

6.1 System Fault ..............................................................................................................................................13

6.2 Alarm Fault................................................................................................................................................13

6.3 Power Fault ...............................................................................................................................................13

6.4 Aux. Supply Fault ......................................................................................................................................13

6.5 Network Fault............................................................................................................................................14

6.6 Fire link Fault.............................................................................................................................................14

6.7 Fire Protection Fault.................................................................................................................................14

7.0 DISABLEMENT INDICATIONS .....................................................................................................15

7.1 Alarms Disabled........................................................................................................................................15

7.2 Alarm Routing (Fire link) Disabled .........................................................................................................15

7.3 Fire Protection Disabled ..........................................................................................................................15

8.0 OTHER INDICATIONS ..................................................................................................................16

8.1 Power .........................................................................................................................................................16

8.2 Test .............................................................................................................................................................16

8.3 Alarm Routing (Fire Link) Operated .......................................................................................................16

8.4 Fire Protection Operated .........................................................................................................................16

8.5 Outputs Delayed .......................................................................................................................................16

9.0 SYSTEM DELAYS ...........................................................................................................................17

10.0 COINCIDENCE/DEPENDENCY OPERATION.............................................................................18

11.0 RESPONSE TO AN ALARM ........................................................................................................19

11.1 Automatic Detection.............................................................................................................................19

11.2 Manual Detection .................................................................................................................................19

11.3 Coincidence/Dependency Activation ..................................................................................................19

11.4 Silencing the Alarms.............................................................................................................................19

11.5 Resetting the panel after an Alarm ....................................................................................................19

11.6 New Zone in Alarm ...............................................................................................................................20

11.7 Activating the Alarms Manually..........................................................................................................20

12.0 STATUS DISPLAY & MENU NAVIGATION ................................................................................21

12.1 The System Normal Display ................................................................................................................21

12.2 Navigating the menus .........................................................................................................................22

12.4 Printing ..................................................................................................................................................23

12.5 Panel Selection......................................................................................................................................24

12.6 Card Selection .......................................................................................................................................24

12.7 Loop Selection.......................................................................................................................................25

12.8 Device Selection ....................................................................................................................................25

12.9 Login ......................................................................................................................................................26

12.10 The Fault, Disablement and Test Display ..........................................................................................27

12.11 The Fire Alarm Display .........................................................................................................................29

13.0 USER MENUS.............................................................................................................................31

13.1 Entering the Menu System ..................................................................................................................31

13.2 System View...........................................................................................................................................32

13.3 Device Detail..........................................................................................................................................33

13.4 Algo-Tec Data ........................................................................................................................................35

13.5 Panel Summary ....................................................................................................................................36

13.6 Device State ...........................................................................................................................................37

13.7 Input Groups.........................................................................................................................................38

13.8 Output Groups ......................................................................................................................................39

13.9 Disable / Enable ....................................................................................................................................40

13.10 Current Disablements ..........................................................................................................................40

13.11 Zone Disablements ...............................................................................................................................41

13.12 Device Disablement..............................................................................................................................43

13.13 Output Group Disablement.................................................................................................................44

13.14 Output Disablement.............................................................................................................................45

13.15 Disable all fire Links .............................................................................................................................46

13.16 Disable all fault Links...........................................................................................................................46

13.17 Disable all fire protection outputs .....................................................................................................46

13.18 Disable all alarm outputs....................................................................................................................46

13.19 Disable all control outputs ..................................................................................................................46

13.20 Disable all non-fire outputs.................................................................................................................46

13.21 Settings ..................................................................................................................................................47

13.22 Set Time / Date......................................................................................................................................48

13.23 Show Configuration .............................................................................................................................49

13.24 Clear System Fault ................................................................................................................................49

13.25 Software Versions .................................................................................................................................50

13.26 Test Menu ..............................................................................................................................................50

13.27 Lamp / Buzzer Test ...............................................................................................................................51

13.28 Zone Test................................................................................................................................................52

13.29 Test Options ..........................................................................................................................................53

13.30 Complete System Test ..........................................................................................................................54

13.31 History....................................................................................................................................................55

13.32 View all fires ..........................................................................................................................................55

13.33 View all non-fires ..................................................................................................................................56

13.34 View by type...........................................................................................................................................57

13.35 Historic Alarm Count............................................................................................................................58

13.36 Printer Menu .........................................................................................................................................59

14.0 EXCHANGING LOOP DEVICES..................................................................................................61

14.1 Entering the Level 3a Main Menu.......................................................................................................61

14.2 Tools menu ............................................................................................................................................62

14.3 Loop Tools .............................................................................................................................................62

14.4 Exchange Device Menu ........................................................................................................................63

15.0 APPENDIX A, RVAV DESCRIPTION ..........................................................................................68

16.0 STANDARDS, DIRECTIVES AND REGULATIONS INFORMATION............................................69

Introduction

This manual applies to the Protec 6500 and 6600 fire alarm control panels however for convenience;

reference will be made only to the ‘6500’. Everything in this manual applies to both the 6500 and 6600

unless stated otherwise.

The Protec 6500 Fire Alarm Control Panel has been designed and manufactured in the United

Kingdom and complies fully with the latest standards dictating fire alarm system design practice

(EN54-2:1997 + A1:2006 and EN54-4:1997 + A1:2002 + A2:2006).

The 6500 is a multi-zone four loop fire alarm control panel that uses digital addressable technology

to communicate with Protec 6000PLUS series loop devices (automatic detectors, Manual Call Points,

sounders, interfaces etc.). Multiple panels may be networked together to create a larger fire alarm

system.

As the integrity and reliability of a fire alarm system is vital, the system continuously monitors all

critical paths for faults. The fire detection / alarm loop devices and wiring are constantly monitored to

check for faults. The integrated power supply regularly performs ‘self-checking’ to ensure it is in full

working order and that the Stand-by batteries are in a good state.

Any faults detected are reported on the front panel display, a fault output is also provided which may

be connected to external systems (a remote monitoring centre, for example) to signal that the system

has a fault and attention is required.

The panel is wall mounted either flush or surface and the generously sized back box allows ample

space for rear or top cable entries.

This equipment and its associated connections must be installed, commissioned and

maintained by a suitably trained skilled and competent person.

This equipment is not guaranteed unless installed and commissioned in accordance

with current national standards

There are no user serviceable parts inside the 6500. A competent person trained to

undertake such work MUST carry out any internal maintenance work. Separate

installation and commissioning manuals are available.

Protec Manufactured Algo-Tec™ 6000 Equipment 5 year warranty

To demonstrate confidence in our product, we provide an extended warranty on our Protec

manufactured Algo-TecTM 6000 equipment.

When a Protec maintenance contract is in place, we warrant all the Protec Algo-TecTM 6000

equipment we manufacture for 5 years.

If, during a service visit, the Protec Service Engineer suspects any Protec manufactured Algo-TecTM

6000 devices are not working properly, they will be replaced at no cost to the client.

Similarly, during the course of a call out, any suspect devices will be replaced at no cost, with only the

normal labour and travelling time charged at standard agreed rates.

Contact Protec Fire Detection for details.

Note that Algo-Tec™Equipment incorporating a CO sensor is excluded from the

warranty.

1.0 User Responsibilities

The registered owner of the fire alarm system has specific responsibilities regarding the installation,

testing and maintenance of the fire alarm system.

BS5839 Pt 1: 2017 Section 6 states that the user of the fire alarm system must appoint a single named

person to supervise all matters regarding the fire alarm system.

Summarised below are the responsibilities expected of the named person,

It is strongly advised that a full copy of BS5839 Pt 1: 2017 is obtained and thoroughly

read and understood.

1.1 Requirements of the Premises Management Named Person

•Ensure that the fire alarm equipment is checked at least once every 24 hours to ensure

there are no faults on the system. Report any faults to the site maintenance manager.

•Ensure that arrangements are in place for correct testing of the fire alarm system (as

specified in BS5839 Pt 1: 2017 Section 6, the user testing is summarised in section 2.0 of

this document).

•Ensure that the system event log is kept up to date and is available for inspection by any

authorised person when required.

•Ensure that all occupants of the protected premises are trained how to use the system

properly and that they are aware of what action to take in the event of an alarm.

•Ensure that false alarms are minimised.

•Ensure all detectors and manual call points are not obstructed. Detectors must have at

least 500mm clear space preserved in all directions around them.

•Establish a liaison with those responsible for changes in, or maintenance of the building

fabric.

•Ensure that when changes are made to the system, record drawings and operating

instructions are updated.

•Ensure that, where necessary, a suitable zone plan is displayed and kept up to date.

•Ensure that any relevant spare parts for system maintenance are held within the

premises.

2.0 Routine Testing of the System

Recommendations for testing of the system are detailed in BS5839 Pt 1: 2017 (Section 6)

The routine testing is briefly detailed below.

2.1 Daily Inspection

•Check that the Power indicator is illuminated.

•Check for any faults on the system and report these to the site maintenance manager.

2.2 Weekly Test

Perform the daily test recommended in 2.1 and;

During the test you may wish to temporarily place the zone to be tested into test

mode

(Consult section 13)

•Perform an indicator test (lamp test) to check the integrity of the front panel indications,

and internal buzzer.

•Ensure no Manual Call Points or detectors are obstructed.

•Operate a Manual Call Point or detector during normal working hours to ensure the fire

alarm system operates correctly.

•A different Manual Call Point or detector on a different zone should be tested each week,

in this way all the devices on all the zones are tested.

•Ensure the system sounders are operational.

•Ensure the sounders are not operated for longer than 30 seconds during testing. The

occupants of the building can then distinguish genuine alarms.

2.3 Monthly Test

Perform the weekly test recommended in 2.2 and;

•If an automatic generator is used as part of the mains failure back-up system it should be

started up once each month by simulated failure of the normal power supply, and then

run in this mode for at least 1 hour.

•Visually inspect the stand-by batteries and their connections. Check that the batteries are

capable of supplying the alarm sounders.

Note:- Care is necessary to ensure that any person undertaking these tasks is competent to do so safely

and has the relevent technical knowledge and training

3.0 Access Levels

There are three access levels to allow users of different authorisation levels access to various parts of

the system. The access levels and a description of functions available are given in the next sections.

3.1 Access Level 1 (General User)

Access level 1 allows the general user to view the status of the panel at any time. Zone fire,

fault, disablement and test states are clearly displayed as are any current system faults and

disablements.

Full detail of the front panel display is given in the next section.

The following functions may be performed at access level 1.

•Entering code for access level 2 or 3a

•Viewing current fires

•Viewing current faults

•Viewing current disablements

•Viewing current tests

•Accepting current faults or alarms ( Mute Buzzer )

Accepting at access level 1 is only available if the button has been made available

during the commissioning stage

3.2 Access Level 2 (Authorised / Trained User)

Access level 2 allows the authorised user access to various critical system functions.

To enter access level 2 enter the user code using the touchscreen LCD (section 12.8).

Refer to section 13 for the features accessible at access level 2.

3.3 Access Level 3a (Exchange Loop Devices)

Access level 3a allows the maintenance staff access to the loop device exchange function.

To enter access level 3a enter the level 3a code using the touchscreen LCD (section 12.8).

Refer to sections 13 & 14 for the features accessible at access level 3a.

Altri manuali per Algo-Tec 6500

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Pro-tec Sistema di controllo

Pro-tec

Pro-tec Algo-Tec 6300 Manuale utente

Pro-tec

Pro-tec Algo-Tec 6500 Guida rapida

Pro-tec

Pro-tec Algo-Tec 6400 Manuale dell'operatore

Pro-tec

Pro-tec Algo-Tec 6500 Guida rapida

Manuali Sistema di controllo popolari di altre marche

Pentair Pool Products

Pentair Pool Products Compool Manuale utente

ComfortNET

ComfortNET CTK04 Manuale utente

Fireye

Fireye InSight II 95DSS3 Manuale utente

CAME

CAME G3000 Manuale utente

Idemia

Idemia MorphoAccess VP MD Manuale utente

Axis

Axis P1445-LE-3 Manuale utente

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuale utente

CNC-Step

CNC-Step High-Z T-Series Manuale utente

Doosan

Doosan DVF Series Manuale utente

Honeywell

Honeywell KAP 140 Manuale utente

Honeywell

Honeywell vk41 series Manuale utente

AirBench

AirBench FPW Guida all'installazione

Cypress

Cypress HHR-3160 Manuale utente

CAME

CAME GLT40AOS Manuale utente

Zonex

Zonex GEN II -VVT Guida utente

Altronics

Altronics K 9650 Manuale utente

micro-trak

micro-trak RoadMaster Manuale utente

micro-trak

micro-trak Calc-An-Acre II Manuale utente