SEH INU-100 Manuale utente
USB Deviceserver
INU-100
Quick Installation Guide
MHAB-QI-INU100
Version: 1.2 | 2018-11
Overview
This 'Quick Installation Guide' provides a description of the
initial setup of the INU-100. The hardware installation is
described in the 'Hardware Installation Guide'.
Table of contents 1.
Do you need assistance? Contact us!
Überblick
Dieser 'Quick Installation Guide' beschreibt die
Inbetriebnahme des INU-100. Die Hardware-Installation wird
im 'Hardware Installation Guide' erklärt.
Inhaltsverzeichnis 11.
Benötigen Sie Hilfe? Kontaktieren Sie uns!
Monday to Thursday
Friday 8:00 a.m. to 4:45 p.m. and
8:00 a.m. to 3:15 p.m. (CET)
+49 (0)521 94226-44
suppor[email protected]
www.seh-technology.com
Montag–Donnerstag
Freitag 8:00–16:45 Uhr
8:00–15:15Uhr
+49 (0)521 94226-44
suppor[email protected]
www.seh.de
Quick Installation Guide [en] 1
Table of Contents
Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started: SEH UTN Manager . . . . . . . . . . . . . . . . . . . . 5
Starting the SEH UTN Manager ...................................................6
Assigning an IP Address to the INU Server..............................7
Adding the INU Server to the Selection List ...........................8
Connecting the USB Device to the Client................................9
Configuring the INU Server . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 [en] Quick Installation Guide
Purpose
The USB Deviceserver 'INU-100' allows you to access non-
network-ready USB devices (e.g. hard disks, etc.) in the
network. For this purpose, the USB devices will be connected
to the USB ports of the INU-100. The software tool 'SEH UTN
Manager' handles the access of the USB devices. In addition,
you can connect a load via relay.
The SEH UTN Manager is installed on all clients that are
intended to access a USB device in the network. The SEH UTN
Manager shows the availability of all INU servers in the
network and establishes a connection between the client and
the USB port including the connected USB device.
The administration of the INU-100 is done via the 'INU Control
Center'.
Quick Installation Guide [en] 3
Software Installation
The software tool 'SEH UTN Manager' organizes the access of
the USB devices. The SEH UTN Manager is available in two
versions:
• Complete version
• Minimal version (only command-line interface)
The complete version has a graphical user interface and offers
additional features. A detailed description can be found in the
INU User Manual.
The SEH UTN Manager is installed on all clients that are
intended to access a USB device in the network. Different
installation files are available, depending on the operating
system.
First, you have to download the installation file for the SEH
UTN Manager from the homepage of SEH Computertechnik
GmbH:
http://www.seh-technology.com/services/downloads/
industrial/inu-100.html
Important:
Make sure that the hardware has been installed
before you begin with the software installation!
The hardware installation is described in the
enclosed document 'Hardware Installation
Guide'.
4 [en] Quick Installation Guide
System requirements
– Windows 7 or later except for Windows Server 20081;
OS X respectively macOS 10.9 or later
– The installation can only be carried out by users with ad-
ministrative rights.
1. Start the installation file.
2. Install the complete version of the SEH UTN Manager (in-
cluding graphical user interface). Follow the installation
routine.
The SEH UTN Manager is installed on your client.
1. Windows 7 and Windows Server 2008 R2: KB3033929 (https://tech-
net.microsoft.com/en-us/library/security/3033929) must be in-
stalled.
Important:
The SEH UTN Manager is also available for
selected Linux systems. All information necessary
for installing and using the SEH UTN Manager in
Linux environments can be found in the INU User
Manual Linux. The documentation is available via
the link on page 3.
Quick Installation Guide [en] 5
Getting Started: SEH UTN Manager
After the SEH UTN Manager is started, the network will be
scanned for connected INU servers. The network range to be
scanned is freely definable.
All INU servers found will be shown in the 'network list'
together with the connected USB devices. The required INU
servers will be selected and added to the 'selection list'. The
INU servers listed in the selection list and the connected USB
devices can then be used by the user.
This chapter describes the first steps with the program.
• ’Starting the SEH UTN Manager’ 6
• ’Assigning an IP Address to the INU Server’ 7
• ’Adding the INU Server to the Selection List’ 8
• ’Connecting the USB Device to the Client’ 9
Detailed information on how to use the SEH UTN Manager
can be found in the Online Help. To start the Online Help,
select Help – Online Help from the menu bar.
6 [en] Quick Installation Guide
Starting the SEH UTN Manager
Windows
Start the SEH UTN Manager on your client via the Windows
start menu.
(Start All apps SEH Computertechnik GmbH SEH
UTN Manager)
Mac
To start the program, double-click the 'SEH UTN Manager.app'
file.
(Applications SEH UTN Manager.app)
Important:
Client and INU server communicate via the UTN
port 9200. This port must not be blocked by a
security software (firewall). If required, you can
change the port number. A detailed description
can be found in the INU User Manual.
Important:
During the initial configuration, client and INU
server must be assigned to the same local
network segment.
Quick Installation Guide [en] 7
Assigning an IP Address to the INU Server
Once the INU server is connected to the network, it checks
whether an IP address can be obtained from the boot
protocols BOOTP or DHCP. If this is not the case, the INU
server assigns itself an IP address via Zeroconf from the
address range (169.254.0.0/16) which is reserved for Zeroconf.
The INU servers found by the program will be displayed in the
network list. You can change the TCP/IP parameters of the INU
server.
1. Confirm the note dialog 'Your Selection List seems to be
empty' by clicking Yes.
If no note dialog is available and the main dialog appears, select Selec-
tion List – Edit from the menu bar.
The Edit Selection List dialog appears.
2. Select the INU server from the network list.
3. Select Set IP Address from the shortcut menu.
The Set IP Address dialog appears.
4. Enter the relevant TCP/IP parameters.
5. Click OK.
The settings will be saved.
8 [en] Quick Installation Guide
Adding the INU Server to the Selection List
The selection list displays the INU servers and the USB devices
connected to their USB ports.
Define the devices you want to use. To do this, you must add
the INU server (and the connected USB devices) shown in the
network list to the selection list.
1. Select Selection List – Edit from the menu bar.
The Edit Selection List dialog appears.
2. Select the INU server from the network list.
3. Click Add.
4. (Repeat steps 2 and 3, if necessary.)
5. Click OK.
The INU servers are shown in the selection list.
You can extend the search for INU servers to any network
range. To do this, change the search parameters for the
network scan.
Windows: via the Options dialog in the Program menu.
Mac: via the Preferences dialog in the SEH UTN Manager
menu.
Altri manuali per INU-100
2
Indice
Lingue:
Altri manuali SEH Server
SEH
SEH mySND-120 Manuale utente
SEH
SEH myUTN-50a Manuale utente
SEH
SEH myUTN-50a Manuale utente
SEH
SEH myUTN-80 Manuale utente
SEH
SEH myUTN-50 Manuale utente
SEH
SEH myUTN-50 Manuale utente
SEH
SEH myUTN-50a Manuale utente
SEH
SEH ProMAX Manuale utente
SEH
SEH myUTN-54 Manuale utente
SEH
SEH myUTN-80 Manuale utente
SEH
SEH Mac OS 8 Manuale utente
SEH
SEH myUTN-52 Manuale utente
SEH
SEH EPS TSE Server 8 Manuale utente
SEH
SEH myUTN-50a Manuale utente
SEH
SEH Dongleserver myUTN-800 Manuale utente
SEH
SEH myUTN-52 Manuale utente
SEH
SEH myUTN-50 Manuale utente
SEH
SEH myUTN-50 Manuale utente
SEH
SEH myUTN-50a Manuale utente
SEH
SEH mySND-120 Manuale utente
