14
4. Self Test
Running the self test
1 Make sure the printer is turned o and the printer cover is closed properly
before performing the self test.
2 Turn the printer on holding the FEED button, then the self-test will start.
The self-test prints the printer setting value and then prints the following, and
pauses. (Error LED On)
SELECT MODE BY BUTTON
3 Press the FEED button consecutively (1~4)
4 The printer is ready to receive data after nishing setting.
15
5. ASCII Print
6. ECO Mode
*** Completed ***
ECO MODE
6-1. Font
-
-
FONT SETTING
