SEWOO SLK-TS400 Manuale utente

Receipt Printer User’s Manual

MODEL : SLK-TS400

All specifications are subject to change without notice

TS400 Rev. F 10/16

J. STEPHEN Lab., Ltd.

28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi-do , 447-210 Republic of Korea

TEL : +82-31-8077-5000 FAX : +82-31-459-8880

www.miniprinter.com

1. Parts Identifications

POWER SWITCH

CONTROL PANEL

COVER OPEN PUSH BUTTON

INTERFACE CONNECTOR PERIPHERAL DRIVE CONNECTOR POWER CONNECTOR

INTERFACE CONNECTOR (USB)

Used to turn on/off

power to the printer.

Features LED indicators

to indicate printer status

and switches to operate

the printer.

Push down this button to

open the printer cover.

PRINTER COVER

Open this cover to load or

replace a paper roll.

Table of Contents

1. Parts Identications 3

2. Setting up the printer 4

2.1 Unpacking 4

2.2 Connecting the cables 5

2.3 Loading the roll paper 8

3. Control panel and other functions 11

3.1 Control panel 11

3.2 Error Indicating 11

4. Self Test 12

5. ASCII Print 13

6. Select Baudrate Mode 13

7. Hexadecimal Dump 14

8. Select Error Beep Mode 14

9. Peripherals Connection 15

10. Printer cleaning 16

11. Specications 17

11.1. General Specications 17

11.2. Auto Cutter Specications 18

11.3. Interface 18

11.4. Electrical Characteristics 18

11.5. Environmental Requirements 19

11.6. Reliability 19

11.7. Certication 19

12. Command List 20

2-2. Connecting the Cables

All cables connect to the connector panel on the back of the printer which is shown below:

Before connecting any of the cables, make sure that both the printer and the computer are turned off.

For connection to a

host computer.

For connection to a

host computer.

For connection of the

AC adapter.

Never unplug the AC

adapter while the

printer is on.

Connects to peripheral

units such as cash

drawer, etc.

Do not connect this to a

telephone.

INTERFACE CONNECTOR PERIPHERAL DRIVE CONNECTOR POWER CONNECTOR

INTERFACE CONNECTOR (USB)

2-1. Unpacking

Your printer box should include these items. If any items are damaged or missing, please contact your

dealer for assistance.

The Printer CD Roll Paper

Adaptor(Option) USB Cable(option)

2. Setting Up the Printer

2-2-2. Cash Drawer Connector

The printer can operate two cash drawers with a 6 pin RJ-11 modular connector.

The driver is capable of supplying a maximum current of 1.0A for 510ms or less when not printing.

PIN SIGNAL DESCRIPTION

1 Signal GND -

2 Drawer kick-out drive signal 1 Output

3 Drawer open/close signal Input

4 +24V -

5 Drawer kick-out drive signal 2 Output

6 Signal GND -

♣NOTE:

Cash drawer 1 and 2 are connected each other inside the printer.

As it is not able to distinguish between Cash drawer 1 and 2,

we recommend you to use only one cash drawer.

2-2-1. Interface Connector

<D-SUB 25 Female Serial> <USB “B” Type>

25Pin Serial Interface

Pin Signal I/O Description

2 TxD Output Printer transmit data line RS-232C level

3 RxD Input Printer receive data line RS-232C level

4, 20 DTR Output Printer handshake to host line RS-232C level

6 DSR Input Data Send Ready

1,7 GND - System Ground

USB Interface

Pin Signal I/O Description

1 +5V - +5V

2DATA- - Printer transmit data line

3DATA+ - Printer transmit data line

4 GND - System Ground

14 25

1 13

5. Note the correct direction that the paper comes off the roll:

6. Pull out a small amount of paper roll as shown.Then, close the cover.

7. Tear off the paper as shown.

O X

2-3. Loading the Roll Paper

Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the

paper glued to the core because the printer cannot detect the paper end correctly.

♣Turn off power switch.

1. Make sure that the printer is not receiving data; Otherwise, data may be lost.

2. Open the printer cover by pushing down the cover open push button.

3. Remove the used paper roll core if there is one inside.

4. Insert new paper roll as shown.

♣CAUTION:

When the cutter is jammed, please follow the steps below.

1. Turn off the power.

2. Press the cover open button and open the cover.

: Be carefull of cutter blade because the cutter blade might be come out.

3. Turn on the power, the cutter will automatically reset.

4. Close the cover.

OPEN

3-1. Control panel

You can control the basic paper feeding operations of the printer with the button on the control panel.

The indicator lights let you to monitor the printer’sstatus.

Control Panel

Button

The button can be disabled by the ESC c 5 command.

Press the FEED button once to advance paper one line. You can also hold down the FEED button to

feed paper continuously.

3-2. Error indicators

This section explains the different patterns signaled by the two LED indicators located on the top cover

of the printer.

STATUS PAPER ERROR POWER REMARKS

RED RED GREEN

Power off OFF OFF OFF Normal power is not supplied to the

printer

Power on OFF OFF ON Normal power is supplied to the printer

On line OFF OFF ON Normal error-free mode

Cover open OFF ON ON Close cover

Paper empty ON ON ON Insert new paper roll

Test mode OFF OFF ON Ignored error led

3. Control panel and other functions

The self-test result indicated whether the printer is operating properly. Also with this, user can check

following options or status of the printer.

 Controlcircuit

 Printermechanism

 Printingquality

 ROMversion

 Interfacesetting

Thistestisindependentofanyotherequipmentorsoftware.

Running the self test

1. Make sure the printer is turned off and the printer cover is closed properly before performing the self test

2. Turn the printer on holding the FEED button, then the self-test will start. The self-test prints the printer

setting value and then prints the following, and pauses. (Error LED On)

SELECT MODE BY BUTTON

1. ASCII PRINT

2. SELECT BAUDRATE MODE

3. HEXADUMP MODE

4. SELECT ERROR BEEP MODE

3. Press the FEED button consecutively (1~4)

1. ASCII PRINT

(press the FEED button once) Printing test page constructed with ACII code.

2. SELECT BAUDRATE MODE

(press the FEED button twice)

Set the speed of Serial Interface

(You can set the BAUDRATE in this mode)

3. HEXADUMP MODE

(press the FEED button triple time) Printing the HEX value received from the interface

4. SELECT ERROR BEEP MODE Select Printer Error Beep On/Off



♣Wait for 5~6 seconds if you want to exit. Printer performs a cutting when exiting this mode

4. The printer is ready to receive data after finishing setting.

4. Self Test

ASCII PRINT is printing a test page constructed ASCII code. You can able to check the printer works

properly with this

The ASCII PRINT test automatically ends and cuts the paper after printing the following:

*** Completed ***

The printer is ready to receive data as soon as it completes the ASCII PRINT.

5. ASCII Print

After entering the BAUDRATE MODE, the list which can select the BPS will be printed. Similar like

Self Test, you can press the FEED button to select a BAUDRATE.

Once the input performs properly, the printer shows a result and store.

The printer is ready to receive data as soon as it completes the SELECT BAUDRATEMODE.

SELECT BAUDRATE BY BUTTON

1. 9600bps

2. 19200bps

3. 38400bps

4. 115200bps

6. Select Baudrate Mode

8. Select Error Beep Mode

7. Hexadecimal Dump

This feature allows experienced users to see exactly what data is coming to the printer. This can be

useful in finding software problems.

When you go into the hex dump function, the printer prints all commands and other data in

hexadecimal format along with a guide section to help you find specific commands.

To use the hex dump feature, follow these steps

1. Please turn printer off.

2. Please turn printer on while press down “Feed” button.

3. Press the FEED button three times when the Self Test printed.

4. Now printer had entered into Hexa dump mode.

5. Run any software program that sends data to the printer. The printer prints ”Hexadecimal printing

mode…” and then all the codes it receives in a two-column format.The first column contains the

hecadecimal codes and the second column gives the ASCII characters that correspond to the codes.

Hecadecimal Dump

1B 21 00 1B 26 02 40 40 .!..& . @ @

1B 25 01 1B 63 34 00 1B .%..c4 ..

41 42 43 44 45 46 47 48 ABCDEFGH

□Aperiod(.)isprintedforeachcodethathasnoASCIIequivalent.

6. Turn off the printer.

7. Turn on the printer.

This function is to select the ON/OFF status of the buzzer mode when a printer makes errors such as

a lack of paper, cover open etc.

Under this mode, you see the set-up menu printed like the down below.

Press the button once or twice to set up the ON/OFF mode.

SELECT ERROR BEEP MODE BY BUTTON

1. BEEP MODE ON

2. BEEP MODE OFF

9. Peripherals Connection

This product can communicate with other devices via Bluetooth or Wi-Fi(802.11a/b/g/n)

communication and cable.

9-1. Bluetooth Connection

1.ThePrintercanbeconnectedtodevicesequippedwithBluetoothcommunicationcapacity

(PDAs, PCs, etc.)

2. Use the Bluetooth connection function supported by the device to connect to the printer.

♣NOTE

Refer to the Bluetooth Manual for more details on connection.

9-2. Wi-Fi(802.11a/b/g/n) Connection

1.ThePrintercanbeconnectedtodevicesequippedwithWi-Fi(802.11a/b/g/n)communication

capacity (PDAs, PCs, etc.)

2. Use the Wi-Fi(802.11a/b/g/n) connection function supported by the device to

♣NOTE

Refer to the Wi-Fi(802.11a/b/g/n) Manual for more details on connection.

Optional

♣

Important!

When connecting or disconnecting the power supply from the printer, be sure that the following

cautions are observed.

Use a power supply (Limited Power Supply) of DC 24V±10% and more than 1.75A.

Be careful about installing the printer in an area where there is electrical noise.

Take the appropriate measure to protect against electrostatic AC line noise, etc.

11-1. General Specications

(1) Printing Method Direct line thermal printing.

(2) Print speed 220mm/sec

(3) Dot density (Hor / Ver) 180 DPI X 180 DPI

(4) Dot Pitch 0.141mm X 0.141mm

(5) Printing Width Max 72mm (512 dots/Line)

(6) Number of print columns.

Font “A” Font “B”

42 columns 56 columns

(7) Roll paper Refer to chapter 2 for details on the recommended roll Paper.

Paper width : Default 79.5 ±0.5mm

Roll diameter : Max. ø83mm

(8) Weight 1.7 Kg

(8) Overall dimension

11. Specifications

132,00

154,50

147,72

10. Printer cleaning

Iftheinterioroftheprinterisdusty,printingqualitycanbelowered.

In this case, follow the instructions below to clean the printer.

1. Use an applicator swab moistened with an alcohol solution to clean the print head and remove

any dusts.

2. Once the cleaning is completed, insert paper roll into the printer few minutes later and close

the printer cover.

♣

Preventing Overheating

To prevent the motor from overheating, continuous operation of the printer should be 1.5 m or

less in print length. Set the pause time for 30 seconds or more than it.

♣Note :

1. Make sure to turn the printer power off prior to cleaning

2. Regarding print head cleaning, as the print head is very hot during printing, turn off the printer

power and wait approximately 10 minute before start.

3. When cleaning the print head, take care not to touch the heated part of the print head.

The print head subject to be damaged by static electricity.

4. Take care not to allow the print head to become scratched and /or damaged in any way.

Altri manuali per SLK-TS400

Indice

Altri manuali SEWOO Stampante

SEWOO

SEWOO WTP-150 Manuale utente

SEWOO

SEWOO LK-P43B Manuale utente

SEWOO

SEWOO LK-P22 Manuale utente

SEWOO

SEWOO LK-P31 Manuale utente

SEWOO

SEWOO LK-P20II Manuale utente

SEWOO

SEWOO LK-P41W Manuale utente

SEWOO

SEWOO SLK-T20EB Series Manuale utente

SEWOO

SEWOO STL202II Manuale utente

SEWOO

SEWOO TL32 Series Manuale utente

SEWOO

SEWOO LK-P12 Guida utente

SEWOO

SEWOO LK-P30 II Manuale utente

SEWOO

SEWOO LK-P41 Guida all'installazione

SEWOO

SEWOO LK-P31 Manuale utente

SEWOO

SEWOO SLK-TE21X Series Manuale utente

SEWOO

SEWOO LK-P30W Manuale utente

SEWOO

SEWOO LK-P41 Istruzioni per l'installazione

SEWOO

SEWOO SLK-TE12 Series Manuale utente

SEWOO

SEWOO LK-P400 Manuale utente

SEWOO

SEWOO LK-B10 Manuale utente

SEWOO

SEWOO LK-P41B Manuale utente

SEWOO

SEWOO LK-T12 Manuale utente

SEWOO

SEWOO LK-TL200 Manuale utente

SEWOO

SEWOO SLK-TL20 Series Manuale utente

SEWOO

SEWOO SLK-TE21X Series Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente