SEWOO SLK-T32EB II Manuale utente
T32EB ENG Rev. I 01/2021
Aroot Co., Ltd.
28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea
TEL : +82-31-8077-5000 / FAX : +82-31-624-5310
http://www.miniprinter.com
All speci cations are subject to change without notice
MODEL : SLK-T32EB SERIES
Receipt Printer User’s Manual
This device co mplies with part 15 of the FCC Rules.
Operation is subject to the following two conditions.
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
Vic Barczyk
19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA
sales@miniprinter.com
Henning Mahlstedt
26188 Edewecht, Holljestr.9 | Germany
europe@miniprinter.com
Victor Almazan
Paseo de la Reforma No. 265 Piso 2.Ocina SBC. Col.
Cuauhtémoc, C.P. 06500 Ciudad de Mexico | Mexico
sales@miniprinter.com
Yan xiao rui
Room 902, No. 7, Lane 118, Xiaojishan Road, Sheshan Town,
Songjiang District, Shanghai | China
sales@miniprinter.com
Disposal of Old Electrical&Electronic Equipment(Applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronics equipment. For more detailed information about recycling of this product,
please contact your local city oce, your household waste disposal service or the shop where you
purchased the product.
2
1. Parts Identications 3
2. Setting up the printer 4
2.1 Unpacking 4
2.2 Connecting the cables 5
2.3 Loading the roll paper 8
2.4 Adjustment of paper width 11
3. Control panel and other functions 12
3.1 Control panel 12
3.2 Error Indicating 12
4. Self Test 13
5. ASCII Print 14
6. ECO Mode 14
6-1. Font 14
6-2. Paper Reduce
15
6-3. Density
15
7. Printer Setting 16
7-1. Baudrate 16
7-2. Cutter
16
7-3. Error Beep
16
7-4. Melody
17
8. Hexadecimal Dump 18
9. Printer Cleaning 19
10. Specications 20
11. Command List 22
12. Utilities 24
13. S/W 25
Table of Contents
3
1. Parts Identications
Open this cover to
load or replace paper.
PRINTER COVER
Used to turn on/o
power to the printer.
POWER SWITCH
Features LED indica-
tors to indicate printer
status and switches to
operate the printer.
CONTROL PANEL
Pull down this lever to
open the printer cover.
COVER OPEN LEVER
4
2. Setting Up the Printer
2-1. Unpacking
Your printer box should include these items.
If any items are damaged or missing, please contact your dealer for assistance.
PPOOWWEERR
EERRRROORR
PPAAPPEERR
FEEDFEED
The Printer CD Roll Paper
Adaptor(Optional) Interface Cable(optional)
5
2-2. Connecting the Cables
You can connect up the cables required for printing to the printer.
They all connect to the connector panel on the back of the printer, which is shown
below :
INTERFACE CONNECTOR
(ETHERNET)
INTERFACE CON-
NECTOR (SERIAL)
INTERFACE
CONNECTOR(USB)
POWER CONNEC-
TOR
CASH DRAWER
CONNECTOR
Before connecting any of the cables, make sure that both the printer and the
computer are turned o.
6
2-2-1. Interface Connector
4 3
21
9 Pin Serial USB “B” Type
Status LED
123453678
Link END
Ethernet
9Pin Serial Interface
PIN SIGNAL I/O Description
2RXD Input Printer receive data line
3TXD Output Printer transmit data line
4, 7 DTR Output Data Terminal Ready
5GND -System Ground
6DSR Input Data Set Ready
1,8,9 NC - -
USB Interface
PIN SIGNAL I/O Description
1+5V -+5V
2DATA- -Printer transmit data line
3DATA+ -Printer transmit data line
4GND -System Ground
7
USB Interface
PIN SIGNAL I/O
1Data Out + Output Data +
2Data Out - Output Data -
3Data IN + Input Data +
4N.C -
5N.C -
6Data IN - Input Data -
7N.C -
8N.C -
This equipment is indoor use and all the communication wirings are limited to
inside of the building.
2-2-2. Cash Drawer Connector
The printer can operate two cash drawers with a 6 pin RJ-11 modular connector.
The driver is capable of supplying a maximum current of 1.0A for 510ms or less
when not printing.
61
PIN SIGNAL Description
1Signal GND -
2Drawer kick-out drive signal 1 Output
3Drawer open/close signal Input
4+24V -
5Drawer kick-out drive signal 2 Output
6Signal GND -
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali SEWOO Stampante
SEWOO
SEWOO LK-P12 Manuale utente
SEWOO
SEWOO LK-P43 Manuale utente
SEWOO
SEWOO SLK-TL32X Series Manuale utente
SEWOO
SEWOO LK-P12 Guida utente
SEWOO
SEWOO LK-P32 Manuale utente
SEWOO
SEWOO WTP-150 Manuale utente
SEWOO
SEWOO SLK-TE32 Series Manuale utente
SEWOO
SEWOO LK-P12B Manuale utente
SEWOO
SEWOO SLK-T21EB Series Manuale utente
SEWOO
SEWOO LK-P41W Manuale utente
SEWOO
SEWOO LK-T12 Manuale utente
SEWOO
SEWOO LK-P SERIES Foglio di istruzioni
SEWOO
SEWOO LK-P20II Manuale utente
SEWOO
SEWOO LK-P41 Guida all'installazione
SEWOO
SEWOO LK-P34 Manuale utente
SEWOO
SEWOO SLK-TL100II Manuale utente
SEWOO
SEWOO SLK-TL100 Manuale utente
SEWOO
SEWOO LUKHAN LK-P21B Manuale utente
SEWOO
SEWOO LK-P11 Istruzioni per l'installazione
SEWOO
SEWOO SLK-TL21 Series Manuale utente
