SEWOO SLK-TS400 Manuale di istruzioni

TS400 ENG Rev. I 01/2021

Aroot Co., Ltd.

28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea

TEL : +82-31-8077-5000 / FAX : +82-31-624-5310

http://www.miniprinter.com

All speci cations are subject to change without notice

MODEL : SLK-TS400 SERIES

Receipt Printer User’s Manual

This device co mplies with part 15 of the FCC Rules.

Operation is subject to the following two conditions.

1) This device may not cause harmful interference, and

2) This device must accept any interference received,

including interference that may cause undesired operation.

Vic Barczyk

19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA

sales@miniprinter.com

Henning Mahlstedt

26188 Edewecht, Holljestr.9 | Germany

europe@miniprinter.com

Victor Almazan

Paseo de la Reforma No. 265 Piso 2.Ocina SBC. Col.

Cuauhtémoc, C.P. 06500 Ciudad de Mexico | Mexico

sales@miniprinter.com

Yan xiao rui

Room 902, No. 7, Lane 118, Xiaojishan Road, Sheshan Town,

Songjiang District, Shanghai | China

sales@miniprinter.com

Disposal of Old Electrical&Electronic Equipment(Applicable in the European Union and other

European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as

household waste. Instead it shall be handed over to the applicable collection point for the recycling of

electrical and electronics equipment. For more detailed information about recycling of this product,

please contact your local city oce, your household waste disposal service or the shop where you

purchased the product.

Table of Contents

1. Parts Identications 3

2. Setting up the printer 4

2.1 Unpacking 4

2.2 Connecting the cables 5

2.3 Loading the roll paper 8

3. Control panel and other functions 11

3.1 Control panel 11

3.2 Error Indicating 11

4. Self Test 12

5. ASCII Print 13

6. ECO Mode 13

6.1 Font 13

6.2 Paper Reduce 14

6.3 Density 14

7. Printer Setting 15

7.1 Baudrate 15

7.2 Cutter 15

7.3 Error Beep 15

7.4 Melody 16

8. Hexadecimal Dump 17

9. Peripherals Connection (Option) 18

9.1 Bluetooth Connection 18

9.2 Wi-Fi Connection 18

10. Printer Cleaning 19

11. Specications 20

12. Command List 22

13. Utilities 24

14. S/W 25

1. Parts Identications

Used to turn on/o

power to the printer.

POWER SWITCH

CONTROL PANEL

Features LED indicators

to indicate printer status

and switches to operate

the printer.

Open this cover to

load or replace a

paper roll.

PRINTER COVER

Push down this button to

open the printer cover.

COVER OPEN PUSH BUTTON

2. Setting Up the Printer

2-1. Unpacking

Your printer box should include these items. If any items are damaged or miss-

ing, please contact your dealer for assistance.

The Printer CD Roll Paper

Adaptor(Option) USB Cable(option)

2-2. Connecting the Cables

All cables connect to the connector panel on the back of the printer which is

shown below:

SLK-TS400

CASH DRAWER CONNECTOR

POWER CONNECTOR

INTERFACE CONNECTOR (USB)INTERFACE CONNECTOR

(SERIAL)

SLK-TS400EB

CASH DRAWER CONNECTOR

RESET

POWER CONNECTOR

INTERFACE CONNECTOR

(USB)

INTERFACE CONNECTOR

(ETHERNET)

Before connecting any of the cables, make sure that both the printer and the

computer are turned o.

2-2-1. Interface Connector

4 3

D-SUB 25 Female Serial USB “B” Type

Status LED

123453678

Link END

Ethernet

Ethernet Interface

PIN SIGNAL I/O

1Data Out + Output Data +

2Data Out - Output Data -

3Data IN + Input Data +

4N.C

5N.C

6Data IN - Input Data -

7N.C

8N.C

25Pin Serial Interface

PIN SIGNAL I/O Description

2TxD Output Printer transmit data line

3RxD Input Printer receive data line

4, 20 DTR Output Data Terminal Ready

6DSR Input Data Set Ready

1, 7 GND -System Ground

USB Interface

PIN SIGNAL I/O Description

1+5V -+5V

2DATA- -Printer transmit data line

3DATA+ -Printer transmit data line

4GND -System Ground

2-2-2. Cash Drawer Connector

The printer can operate two cash drawers with a 6 pin RJ-11 modular connector.

The driver is capable of supplying a maximum current of 1.0A for 510ms or less

when not printing.

PIN SIGNAL Description

1Signal GND -

2Drawer kick-out drive signal 1 Output

3Drawer open/close signal Input

4+24V -

5Drawer kick-out drive signal 2 Output

6Signal GND -

NOTE

Cash drawer 1 and 2 are connected each other inside the printer.

As it is not able to distinguish between Cash drawer 1 and 2, we recommend

you to use only one cash drawer.

Altri manuali per SLK-TS400

Indice

Altri manuali SEWOO Stampante

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente