-06--25-
Need To know
Before use
TEMP
12) : Wind velocity unit (foot /minute)
13) : Wind velocity unit (sea mile/hour)
14) : Wind velocity unit (mile/hour)
15) : Wind flow unit (cube foot/minute)
16) : Wind flow unit (cube meter/minute)
2
17) : M IS used to indicate duct area in square meter
when in flowfunction Is used toindicate
wind temperature inmetric.
18) Is used toindicate duct areain square feet
when in flowfunction ; is used to indicate wind
temperature in metric.
19) : Ductarea display area
20) : Lowbattery indicating symbol,please replace
battery if thissymbol appeared.
21) : Ifmeasured value isover 9999, thesymbol “X10 ”
or“X100”will appear.
22) : Wind velocity and flow displayarea
23) : When backlight is on, this symbol will appear.
24) : Wind temperature singal
25) : smallfan signal: indicate the WindTemperature
status.
26) : Bigsfans : indicatewind velocity /flowstatus,
which was subjectto WindVelocity and revolving
ft/min
knots
mph
CFM
CMM
X100
CMCM 2
FTFT 2
Order
RealTi meM easure
Open
Save
ImportD ata
Export To Excel
Printer Setup
Print Data Sheet
Order function
Real time datameasurement, the
measured data willreal time be
shown on thecomputer.
Open measurement datafile that
is saved asthe LAB format
Save real timemeasurement data
Import data storedin the
anemometer to computer
Export the saveddata to excel.
Printer setup
Print data sheet
Toolbar introduction as shown in following figure:
Real time data measurement, the measured
data will real time be shown on the computer.
Import data stored in the anemometer to
computer
Open measurement data file that is saved
as the LAB format
Save real time measurement data
Export the saved data to excel.
Print the recorded data
System setup
Help
System information
Close the software
Button Function
