SNBC BTP-R880NP Manuale del proprietario

Receipt Printer

BTP-R880NP

PROGRAMMING MANUAL

Confidential BTP-R880NP Programming Manual

- 1 -

REVISION HISTORY

Date Version Description Drafted by

2010-7-13 V100 Release Ding Jinfeng, Cao

Yongkang

Confidential BTP-R880NP Programming Manual

- 2 -

Declaration

If you need this manual, please comply with the Clause as below.

If you disagree with it, please return this manual immediately.

This manual contains the private confidential information belonging to ORIENT Technologies bv

(hereinafter referred to as “ORIENT Technologies”) and Shandong New Beiyang Info-Tech Co., Ltd.

(hereinafter referred to as SNBC). You must keep its relative content as the confidential information. If

the users are commercial customers or entities, you should be aware to disclose it to those people

with the confidential responsibility including your employees, agencies and partners. When you

terminate the cooperation with ORIENT Technologies and SNBC or bring about your request, you

have to stop using this manual and return it to ORIENT Technologies or SNBC, or destroy the

confidential information.

If any relative organ such as court, arbitrator or government authority requests you to disclose any

confidential information of this manual, you must inform ORIENT Technologies or SNBC quickly and

also agree that you shall cooperate or assist with ORIENT Technologies or SNBC reasonably during

the negotiation.

ORIENT Technologies or SNBC has the right to disclose its confidential information and does not be

responsible for the loss or damages caused from the wrong usage or reference of this manual by

users.

Information in this document is subject to change without notice, which is only used for product

maintenance or service relative to this manual. ORIENT Technologies and SNBC reserves the right to

improve products as new technology, components, software, and firmware become available. If users

need further data about the products, please feel free to contact ORIENT Technologies or SNBC.

No part of this document may be reproduced or transmitted in any form or by any means, electronic

or mechanical, for any purpose without the express written permission of ORIENT Technologies or

SNBC.

Printed in China

Trademarks

Our registered trademarks are

In CHINA:

Address: No.169 Huoju Rd, Weihai, Shandong, China. 264209

Hot line: +86-631-5673777

Fax: +86-631-5673778

Confidential BTP-R880NP Programming Manual

- 3 -

E-mail: [email protected]

Website: www.newbeiyang.com (via Contact button)

In EUROPE: ORIENT Technologies bv

Address: Meerheide 115, 5521 DX Eersel, The Netherlands

Hot line: +31-497-331080

Fax: +31-497-386430

Website: www.orient-technologies.com (via Contact button)

1 Overview 1

1.1 COMMANDS CLASSIFICATION .................................................................................................................................... 1

1.2 KEY TERMS................................................................................................................................................................ 1

1.3 COMMAND FORMAT................................................................................................................................................... 2

2 Command Description 3

2.1 PRINT COMMAND....................................................................................................................................................... 3

LF...............................................................................................................................................................................3

FF...............................................................................................................................................................................3

CR...............................................................................................................................................................................3

ESC FF.......................................................................................................................................................................3

ESC J n.......................................................................................................................................................................4

ESC d n.......................................................................................................................................................................5

2.2 LOCATION COMMAND................................................................................................................................................ 5

HT...............................................................................................................................................................................5

ESC $ nL nH...............................................................................................................................................................6

ESC D n1...nk NUL ....................................................................................................................................................7

ESC T n ......................................................................................................................................................................7

ESC W xL xH yL yH dxL dxH dyL dyH......................................................................................................................9

ESC \ nL nH.............................................................................................................................................................. 11

ESC a n..................................................................................................................................................................... 11

GS $ nL nH...............................................................................................................................................................13

GS L nL nH...............................................................................................................................................................13

GS P x y....................................................................................................................................................................14

GS W nL nH..............................................................................................................................................................15

GS \ nL nH................................................................................................................................................................16

2.3 CHARACTER COMMAND........................................................................................................................................... 16

CAN..........................................................................................................................................................................16

Confidential BTP-R880NP Programming Manual

- 4 -

ESC SP n ..................................................................................................................................................................17

ESC ! n .....................................................................................................................................................................18

ESC % n ...................................................................................................................................................................21

ESC & y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]............................................................................................21

ESC – n.....................................................................................................................................................................23

ESC ? n.....................................................................................................................................................................24

ESC E n ....................................................................................................................................................................24

ESC G n....................................................................................................................................................................25

ESC M n ...................................................................................................................................................................25

ESC R n ....................................................................................................................................................................26

ESC V n ....................................................................................................................................................................27

ESC t n......................................................................................................................................................................27

ESC { n.....................................................................................................................................................................28

GS ! n........................................................................................................................................................................29

GS B n ......................................................................................................................................................................30

FS ! n........................................................................................................................................................................30

FS &.........................................................................................................................................................................31

FS - n........................................................................................................................................................................31

FS . ...........................................................................................................................................................................32

FS 2 c1 c2 d1...dk.....................................................................................................................................................32

FS C n.......................................................................................................................................................................33

FS S n1 n2 ................................................................................................................................................................34

FS W n......................................................................................................................................................................35

2.4 BITMAP COMMAND ................................................................................................................................................. 35

ESC * m nL nH d1... dk............................................................................................................................................35

ESC # n.....................................................................................................................................................................37

GS * x y d1...d(x × y × 8).........................................................................................................................................37

GS / m.......................................................................................................................................................................38

GS v 0 m xL xH yL yH d1....dk .................................................................................................................................38

FS p n m ...................................................................................................................................................................39

FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n..........................................................................................40

2.5 STATUS COMMAND .................................................................................................................................................. 42

DLE EOT n...............................................................................................................................................................42

GS a n.......................................................................................................................................................................44

GS r n .......................................................................................................................................................................45

2.6 BARCODE COMMAND............................................................................................................................................... 46

GS H n......................................................................................................................................................................46

GS f n........................................................................................................................................................................46

GS h n.......................................................................................................................................................................48

①

GS k m d1...dk NUL

②

GS k m n d1...dn................................................................................................................48

GS s n1 n2 n3 n4 n5 n6 n7 n8 Set barcode parameter of GS1..................................................................................53

GS o n.......................................................................................................................................................................55

GS p n.......................................................................................................................................................................55

GS q n.......................................................................................................................................................................55

GS w n ......................................................................................................................................................................55

2.7 BI-COLOUR COMMAND ............................................................................................................................................ 56

Confidential BTP-R880NP Programming Manual

- 5 -

ESC r n enter /exit bi-colour print mode..................................................................................................................56

ESC C n select print colour......................................................................................................................................57

2.8 INVERT PRINT COMMAND......................................................................................................................................... 57

GS ( z nL nH 0 S enter upside-down printing mode .................................................................................................57

GS ( z nL nH 0 E print sample data and exit upside-down printing mode ...............................................................59

2.9 WATER PRINT COMMAND ......................................................................................................................................... 59

GS { w f n1 n2 n3 n4 n5 water print bitmap parameter setting................................................................................59

GS { w n enter\exit water print mode .......................................................................................................................60

2.10 GREYSCALE PRINTING COMMANND ....................................................................................................................... 60

FS r n xl xh yl yh zl zh d1 d2 d3...d(k) FLASH grayscale bitmap download ............................................................60

ESC c 6 n yl yh zl zh d1 d2 d3 ...d(k) RAM grayscale bitmap download..................................................................62

ESC c 7 n print RAM grayscale bitmap....................................................................................................................63

2.11 OTHER COMMANDS ............................................................................................................................................... 64

DLE ENQ n ..............................................................................................................................................................64

DLE DC4 n m t.........................................................................................................................................................64

ESC 2........................................................................................................................................................................65

ESC 3 n.....................................................................................................................................................................65

ESC = n....................................................................................................................................................................65

ESC @......................................................................................................................................................................66

ESC L .......................................................................................................................................................................66

ESC S........................................................................................................................................................................67

ESC c 0 n..................................................................................................................................................................68

ESC c 3 n..................................................................................................................................................................68

ESC c 4 n..................................................................................................................................................................69

ESC c 5 n..................................................................................................................................................................70

ESC p m t1 t2............................................................................................................................................................70

[Reference] DLE DC4...........................................................................................................................................70

Confidential BTP-R880NP Programming Manual

- 1 -

1 Overview

This manual classifies the printer commands into several kinds based on its functions, and also

describes the applications of relative commands in detail depending on its sorts. We hope that it is

helpful for programmers to get known of those commands.

1.1 Commands classification

This label printer commands are classified as below:

Print commands: used for printing and feeding paper;

Position commands: to control the print position;

Character commands: to set characters property;

Bitmap commands: to download bitmap and print, including NV and RAM bitmap;

Status commands: used for printer status query;

Barcode commands: barcode print and property settings;

Other commands: used for periphery control, Micro-definition and initialization;

Command instruction refers to the detailed function of relative commands.

1.2 Key terms

Real-time commands – These commands are acted on immediately upon being received by the

printer.

Print buffers – used to store figure data to be printed;

Page mode –Under this mode, the printer possesses all data in specified memory and thinks of this

as a virtual page. The page is printed when the printer receives print command either FF or ESC FF;

Standard mode – Standard mode is the default mode of printer, namely line mode. Under this mode,

the printer prints data and feeds paper upon print line buffer full (data is enough for one print line) or

receiving print command like LF;

HRI character – Human Readable Interface;

NV – Non-volatile memory in which data stored does not loss when power off. NV: Non-volatile

RAM –Random Access Memory;

DPI – Print dots per inch (one inch equals to 25.4mm). It is used to identify the resolution of a printer.

Example, 203DPI means 203 print dots per inch.

Baseline – The standard position where character data in print buffers are stored. The figure shows

the position of ordinary characters in standard mode and page mode:

Confidential BTP-R880NP Programming Manual

- 2 -

1.3 Command format

[Function] The name and function summary of commands;

[Format] The command expressed in ASCII, Hex and Decimal separately. If not specified, the

value in “range” part is decimal. For instance, in range” 1 ≤n≤4”, ‘1’ is not an ASCII

code but a decimal number;

[Range] The value range of parameter in the command;

[Note] Explain the main features and application notices of commands;

[Default] The initial value used after the printer initialized;

[Relative] Other commands related to current commend;

[Example] Example used for current or relative commands.

All command data in programming Demo use HEX. All normal font/characters are data.

There is no explanation for the data of command such as 42 43 which is data. The

font/character underlined and emphasized is a command such as 1B 40. All the data

inside parentheses after all commands in Demo is used to explain the meanings of this

command. The parentheses and data inside it is not the command to be transmitted to

the printer.

Confidential BTP-R880NP Programming Manual

- 3 -

2 Command Description

2.1 Print command

[Function] Print and line feed

[Format] ASCII LF

Hex 0A

Decimal 10

[Note] This command sets the print position to the beginning of the line.

[Relevant command] ESC 2, ESC 3

[Function] Print all data in the print buffers and return to the standard mode.

[Format] ASCII FF

Hex 0C

Decimal 12

[Notes] · This command is valid only in page mode.

· The buffer data is deleted after being printed.

· The printer does not execute paper cutting.

· This command sets the print position to the beginning of the line.

[Relevant command] ESC FF, ESC L, ESC S

[Function] When the command is enabled, it equals to LF; it is ignored when disabled,

[Format] ASCII CR

Hex 0D

Decimal 13

[Notes] · Sets the print starting position to the beginning of the line.

· This command is set according to the printer configuration.

[Relevant command] LF

ESC FF

[Function] Print data in page mode

[Format] ASCII ESC FF

Hex 1B 0C

Decimal 27 12

Confidential BTP-R880NP Programming Manual

- 4 -

[Notes] · This command is enabled only in page mode.

· After printing, the printer does not clear the buffered data, setting values for ESC T and

ESC W, and the position for buffering character data.

[Relevant command] FF, ESC L, ESC S

[Relative] FF, ESC L, ESC S

ESC J n

[Function] Print and feed paper

[Format] ASCII ESC J n

Hex 1B 4A n

Decimal 27 74 n

[Range] 0 ≤n ≤255

[Notes] · After printing is completed, this command sets the print starting position to the beginning

of the line.

· The paper feed amount set by this command does not affect the values set by ESC 2 or

ESC 3.

· The horizontal and vertical motion unit are specified by GS P.

· In standard mode, the printer uses the vertical motion unit (y).

· In page mode, this command functions as follows, depending on the starting position of

the printable area:

1) When the starting position is set to the upper left or lower right of the printable area

using ESC T, the vertical motion unit (y) is used.

2) When the starting position is set to the upper right or lower left of the print able area

using ESC T, the horizontal motion unit (x) is used.

· The maximum line spacing is 1016mm (40 inches). When the setting value exceeds the

maximum, it is converted to the maximum automatically.

[Relevant command] GS P

[example] 1B 40 (initialize printer)

1D 50 CB CB (set the resolution 203×203)

41 41 41 41 41 41 41(datas waiting for printing)

1B 4A 50 (print and feed paper 80/203 inches)

42 42 42 42 42 42 42 0A (datas waiting for printing)

Results:

Altri manuali per BTP-R880NP

Indice

Altri manuali SNBC Stampante

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente