SOLTEK SL-52D2 Manuale utente
i
Notice to End Users
This UserÕs Guide & Technical Reference is for assisting system
manufacturers and end users in setting up and installing the
mainboard.
Every effort has been made to ensure that the information in this
manual is accurate. Soltek Computer Inc. is not responsible for
printing or clerical errors. Information in this document is subject to
change without notice and does not represent a commitment on the
part of Soltek Computer Inc.
No part of this manual may be reproduced, transmitted, translated
into any language in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose
without the express written permission of Soltek Computer Inc.
Companies and products mentioned in this manual are for
identification purposes only. Product names appearing in this
manual may or may not be registered trademarks or copyrights of
their respective companies.
SOLTEK COMPUTER INC. PROVIDES THIS MANUAL ÒAS ISÓ
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL SOLTEK COMPUTER
INC. BE LIABLE FOR ANY LOSS OR PROFITS, LOSS OF BUSINESS, LOSS
OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
KIND, EVEN IF SOLTEK COMPUTER INC. HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
© Copyright 1996 Soltek Computer Inc. All right reserved
Edition: JULY 1996
Version: 2.0
SL-52D2/D5 SERIAL
SL-52E2/E5 SERIAL
Contents iii
Contents
Chapter 1: Introduction --------------------------------------- 1
Features -------------------------------------------------------------------------2
Mainboard Layout with Default Settings ------------------------------3
Chapter 2: Hardware Setup---------------------------------- 4
CPU Type Configuration---------------------------------------------------5
CPU 1.5X Clock Setting (Red Caps) -------------------------------- 5
Pentium Ð 75/90/100 MHz ------------------------------------- 5
CPU 2.0X Clock Setting (Red Caps) -------------------------------- 6
Pentium Ð 120/133 MHz ---------------------------------------- 6
CPU 2.5X Clock Setting (Red Caps) -------------------------------- 7
Pentium Ð 150/166 MHz ---------------------------------------- 7
CPU 3.0X Clock Setting (Red Caps) -------------------------------- 7
Pentium Ð 180/200 MHz ---------------------------------------- 7
JP14: Cache Memory Select ------------------------------------------8
CPU Voltage Setting --------------------------------------------------- 9
Single Voltage Setting: Intel P54C, Cyrix 6x86, AMD
K5/SSA5 -------------------------------------------------------------9
Dual Voltage Setting: Intel P55C, Cyrix 6x86(L), M2,
AMD K5/SSA5 (Green Caps) ---------------------------------- 9
System Memory Configuration----------------------------------------- 10
Jumper Settings ------------------------------------------------------------- 11
Factory Fixed Jumpers----------------------------------------------- 11
JP12: Monitor Selection --------------------------------------------- 11
JP17, JP18: Bus Ratio Select ---------------------------------------- 12
iv
JP3: Clear CMOS Data ---------------------------------------------- 13
JP8: ISA Clock Select ------------------------------------------------ 13
JP21, JP23: External Bus Frequency Select --------------------- 14
JP5, JP6, JP7, JP9: CPU Vcc Voltage Select --------------------- 15
Intel P54C/CTB, AMD K5 (PR75 ~ PR133), and Cyrix
6x86 ----------------------------------------------------------------- 15
Intel P55C, Cyrix 6x86(L), M2, AMD K5 (Over PR166),
Vcore 2.8V--------------------------------------------------------- 15
Intel P55C, Cyrix 6x86(L), M2, AMD K5 (Over PR166),
Vcore 2.5V--------------------------------------------------------- 16
Connectors ------------------------------------------------------------------- 16
KB1: Keyboard Connector ----------------------------------------- 16
PS/2 Mouse Connector---------------------------------------------- 16
LPT1: Parallel Port --------------------------------------------------- 17
COM1 /COM2: Serial Port Connectors ------------------------ 17
FDC1: Floppy Drive Connector ---------------------------------- 18
IDE1/IDE2: Primary/Secondary IDE Connectors----------- 18
Power Connector ----------------------------------------------------- 19
J3: Reset Switch ------------------------------------------------------- 20
J2: Keylock Switch --------------------------------------------------- 20
J1: Speaker Connector----------------------------------------------- 20
J4: IDE LED Activity Light----------------------------------------- 20
IR1: Infrared Port Module Connector--------------------------- 21
USB1: USB Connector ----------------------------------------------- 21
Chapter 3: BIOS Setup ---------------------------------------22
Standard CMOS Setup ---------------------------------------------------- 23
BIOS Features Setup ------------------------------------------------------- 25
Chipset Features Setup --------------------------------------------------- 28
Power Management Setup ----------------------------------------------- 31
PnP/PCI Configuration Setup ------------------------------------------ 33
Load Setup Defaults ------------------------------------------------------- 34
Integrated Peripherals ---------------------------------------------------- 35
Supervisor/User Password---------------------------------------------- 38
Contents v
IDE HDD Auto Detection ------------------------------------------------ 39
Save & Exit Setup ---------------------------------------------------------- 39
Exit Without Saving ------------------------------------------------------- 39
Introduction 1
Chapter 1
Introduction
The 82430VX motherboard is a high performance system
hardware based on the Intel Pentium¨
processor and is
equipped with four PCI slots, four standard ISA slots, Super
Multi I/O controller, and dual ports PCI IDE connectors for
future expansion. The hardware dimension is 220mm x
280mm with four layer design technology.
2
Features
¥ Supports Intel Pentium¨
/P55C, AMD K5 CPU at 75 ~
166 MHz, and Cyrix 6x86(L)/M2 CPU at P120+~ P166+
MHz on a ZIF Socket 7
¥ Intel 82430 VX chipset, PCI 2.1 compliant
¥ Supports dual USB ports
¥ Supports SDRAM 3.3V/Unbuffered Type (Optional)
¥ Supports 256K/512K write back cache with Pipeline
Burst SRAMs
¥ Supports up to 128 MB DRAM (Min. 4MB) onboard and
BIOS AUTO SPM/EDO/SDRAM DRAM table free
configuration
¥ Supports two independent high performance PCI Bus
Master IDE interface
¥ Supports four 32 bits master PCI slots, four 16 bits ISA
slots, and an jumperless PCI INT# Control Scheme
¥ 1 floppy port, 1 parallel port (EPP, ECP port), and 2 serial
ports (16550 Fast UART compatible)
¥ Supports PS/2 mouse connector
¥ Supports Award Plug & Play BIOS with Flash Memory
¥ Supports CPU Hardware Green function.
¥ Supports Infrared interface (optional)
¥ Supports 120MHz IDE Floppy and SCSI Boot function.
Note: Make sure that the SDRAM module not only has to be
168 pin DIMM but designed for 3.3V SDRAM as well.
Double check with the SDRAM supplier before install
any SDRAMs. The mainboard manufacturer has no
obligation to any damage of the board by using the
incorrect specification of SDRAM.
Introduction 3
Mainboard Layout with Default Settings
The following figure is the default settings for single voltage
of the Intel 100/66 with the 256K cache. For the best cooling
effect, make sure the airflow from the CPU fan is facing to
the heatsink.
Keylock J4 SM1 J5
JP12
PCI1
PCI SLOTS
PCI3
PCI2
SIMM4
SDRAM (3.3V Type)
SIMM3
SIMM2
SIMM1
COM1
COM2
IDE1
IDE2
Power
KB1
PCI4
PS/2
LPT1
FDC1
SRAM Slot
I/O
PIIX3
82437VX
KB BIOS
PB
SRAM
PB
SRAM
82438VX
82438VX
RTCBIOS
ISA SLOTS
JP8
Reset
SPK
IR1
J3
T/LED
HD/LED J6J2
J1
JP21
JP23
J7
USB1
JP3
CPU
TAG RAM
JP5
+
–
BAT
JP7
JP9
JP14
1
1
1
JP6
1
JP17
JP18
Heat Sink Heat Sink
1
IMI
1
1
Only for
SL-52D2/D5
Figure 1Ð1. SLÐ52D2/D5/E2/E5 Motherboard Layout
4
Chapter 2
Hardware Setup
This chapter includes sections of setting up jumpers on the
motherboard, the system memory configuration, the cache
memory configuration, and attaching the connectors. Refer
back to this chapter when you need to upgrade or
reconfigure your system and remember to turn off the
power of the system as well as all peripheral devices before
performing any work on the system.
Symbols used in this chapter are described below:
For 2-pin jumper:
Ð Close the jumper by inserting the jumper
cap over the two pins of the jumper.
Ð Open the jumper by removing the
jumper cap.
For 3-pin jumper:
123
Ð Close pins 1 and 2 with an jumper cap.
123
Ð Close pins 2 and 3 with an jumper cap.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali SOLTEK Scheda madre
SOLTEK
SOLTEK SL-65MIE Manuale utente
SOLTEK
SOLTEK SL-65KV2-T Manuale utente
SOLTEK
SOLTEK SL-85ERV4-R Manuale utente
SOLTEK
SOLTEK 85ERV2 Manuale utente
SOLTEK
SOLTEK SL-63AV Manuale utente
SOLTEK
SOLTEK 75FRV Manuale utente
SOLTEK
SOLTEK SL-K8T-939FL Manuale utente
SOLTEK
SOLTEK KT400-R Manuale utente
SOLTEK
SOLTEK SL-65EP+-T Manuale utente
SOLTEK
SOLTEK SL-865G3 Manuale utente
SOLTEK
SOLTEK SL-53D2 Manuale per l'uso e la cura
SOLTEK
SOLTEK SL-85MIR3 Manuale utente
SOLTEK
SOLTEK SL-85DRV+ Manuale utente
SOLTEK
SOLTEK SL-65GS Manuale utente
SOLTEK
SOLTEK SL-KT880E-GR Manuale utente
SOLTEK
SOLTEK SL-PM800I-R Manuale utente
SOLTEK
SOLTEK SL-67FV1 Manuale utente
SOLTEK
SOLTEK SL-75DRV3/75DRV3+ Manuale utente
SOLTEK
SOLTEK SL-PM800I Manuale utente
SOLTEK
SOLTEK 85DIR Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
