Sonos Roam SL Manuale utente

Roam SL

Overview The ultra portable speaker for listening at

home and on the go—

Enjoy up to 10 hours of continuous playback on a single

charge. When it’s time to recharge:

Connect the included cable to a USB power source

(7.5W minimum; 10W recommended).

Place on a compatible Qi wireless charger.

Place Sonos Roam SL on its custom wireless

charger (sold separately).

Lightweight, durable, waterproof design is ideal for the

beach, pool parties, and more.

Stream content over WiFi or Bluetooth®.

Control your Sonos system with the Sonos S2 app (for

Android and iOS).

See Setup when you're ready to add Sonos Roam SL to

your system.

Controls and lights

Volume control Press and hold to quickly

change the volume.

Note: You can also use

the Sonos app to adjust

volume.

Playback control

Note: You can’t skip

forward or go back when

listening to a radio station.

Volume up (+)

Volume down (-)

Press once to play or

pause audio.

Double press for next

track.

Triple press for

previous track.

Status light

Displays the product's

connection to WiFi or

Bluetooth, indicates when

the volume is muted, and

signals errors:

Solid white—on

Blinking blue—

Bluetooth pairing mode

Solid blue—

connected with device

via Bluetooth

Flashing orange—if

the product gets too

hot, the status light

flashes orange and the

product chirps 3 times.

Move the product to a

cooler location, away

from direct sunlight.

Learn more

Battery light

Indicates the battery

status:

Battery Saver: To save

battery life, you can set

Sonos Roam SL to power

off automatically instead of

going to sleep. Go to >

System, and select Sonos

Roam SL. It won't appear

in the Sonos app until it’s

powered back on.

Note: Sonos Roam SL's

remaining battery life is

always visible in the

Sonos app.

Blinking orange

indicates low battery.

Solid orange when it

starts charging. The

light may stay on for

several minutes

depending on how low

the battery is. The

battery will continue to

charge when the light

turns off. Learn more

Connector panel

1Power/Bluetooth button Power on/sleep/wake: Short press

(less than 1 second)

When you put Roam to sleep, you’ll

hear a quick tone and the status light

will turn off. Press again to wake. If

you put Roam to sleep, it will stay

asleep for 10 minutes before

powering off.

Bluetooth: To pair with a device,

press and hold until you hear the

second tone and the status light

blinks blue, then select Roam from

your device’s Bluetooth pairing list.

To pair with a different device, wait

until Roam connects to the current

device, then press and hold again to

restart the pairing process.

Power off: Long press (about 5

seconds)

Press and hold until you hear the third

tone. The status light blinks blue, then

turns off.

2USB-C port Use the included cable to connect a

compatible 7.5W minimum (10W

recommended) USB-A power source.

(Sonos 10W USB Power Adapter

sold separately.)

Select a location

You can use your speaker just about anywhere. Here are a few things to keep in mind:

Bluetooth pairing

1. Turn on Bluetooth in your device settings.

2. Press and hold the power button on the speaker for 2 seconds until you hear the second

pairing tone, then release. The status light blinks blue when the speaker is ready to pair.

3. Choose Sonos Roam SL from the list of available devices in your Bluetooth settings. Your

mobile device will automatically connect next time.

You can place the speaker next to a wall or on a shelf—for best performance, leave at

least 1" (2.5cm) space around the back of the speaker.

The speaker’s durable design includes silicone end caps to protect from drops or bumps.

Avoid placing the speaker in direct sunlight.

You can place Sonos Roam SL horizontally or vertically. When vertical, the speaker takes

up barely any room. Position it horizontally for added stability on uneven surfaces.

Charging

USB-C to USB-A

Use the included cable to

connect a compatible

7.5W minimum (10W

recommended) USB-A

power source. (Sonos

10W USB Power Adapter

sold separately.)

Note: Battery life is visible

in the Sonos app.

Sonos Wireless Charger

(sold separately)

Place the speaker on the

smooth, magnetized side

of the charger for easy

recharging—no extra

wires or cables needed.

Qi charger

Place the speaker on a

compatible Qi-certified

wireless charger.

Set up stereo pair

Pair two Sonos speakers in the same room for an even wider, stereo experience. One

speaker serves as the left channel and one serves as the right channel.

Note: The Sonos speakers in a stereo pair must be the same type.

1. Place the speakers 8 to 10 feet apart. Your favorite listening position should be 8 to 12

feet from the paired speakers—less distance increases bass, more distance improves

stereo imaging.

2. Go to > System.

3. Select one of the speakers you want to use in the stereo pair, then choose Set Up Stereo

Pair to get started.

Learn more

Altri manuali per Roam SL

Indice

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente