8
CONTROLS
TOUCH SCREEN DISPLAY: displays the temperature
in °C / °F, the time, the 10 preset programs and
whether the heating element is on or not. All these
values can be edited on the display itself.
START button: hold down for 3 seconds to
startthecookingcycle.Thebuttonashes
during the cycle.
STOP button: hold down for 3 seconds to stop
the cooking cycle.
UP (+) buttons: they are used to set the
temperature and cooking time values, in
addition to the stand-by time.
PROGRAM / CONFIRM button: pressing this
button displays the list of programs, pressing it
repeatedly displays the programs one at a time.
CAUTION:thisbuttonisalsousedtoconrm
changes to the time and/or temperature settings
both within a programme and manually, by
pressing and holding it for 3 seconds.
TEMPERATURE button: press this button
to access the temperature setting and
conrm/quitsettingmode.Duringthe
cycle, pressing this button displays the
temperature setting.
°C / °F button: press one of the 2 buttons to
switch between Celsius and Fahrenheit.
Fig. no 7
TIME button: press this button to set the
cooking program time; during the cycle, it
displays the time remaining to completion.
Whenthemachineisrststartedupor
is in stand-by mode, press it to adjust the
time using the arrows that appear above
the hours, minutes and seconds. Press the
buttonagaintoconrmthesetting.
HEATING ELEMENT led: the led turns
on when a cooking cycle is in progress to
indicate that the heating element is on and
heating the water. When the temperature
setpoint is reached, the led and the heating
element itself both turn off, and then turn
on when required to maintain the water
temperature.
PROGRAM led: the led (dot on the screen)
turns on to indicate that one of the ten
programs is being displayed or is in use for
cooking. If none of the dots on the screen is
on, no program is displayed.
