Stewart Filmscreen AT 1.5 Manuale utente

AT 1.5

Fixed Frame, Tensioned and Grommet Screen

OWNER’S MANUAL

Printed in U.S.A. Stewart Filmscreen Corporation

Stewart Filmscreen reserves the right to make changes to the product specified in this document.

Sizes and specifications subject to change without notice at manufacturer’s discretion. From time to

time, this document is updated. Current versions of documentation are posted on the Stewart

Filmscreen website at: www.StewartFilmscreen.com

Revision 1.1

Date: 6/25/2021

AT 1.5

O W N E R’ S M A N U A L

Contents

To the Owner

About the AT 1.5 Screen

Preparing the Installation

Frame Assembly Instructions

Wall Board Mount

Wall Plate Mount

Eye Bolt (Hanging) Mount

T-Stand (Self-Supporting) Mount

Aperture Mount

Attaching the Screen to the Frame

This Screen Seems too Small

Caring for and Cleaning the Screen

One (1) Year Limited Warranty

Stewart Filmscreen – AT 1.5

TO THE OWNER

Congratulations on purchasing the finest optical viewing screen in the world.

Your handcrafted AT 1.5 projection screen has been carefully inspected to ensure you will have an

optimal viewing experience that will last many years. Please take a moment to review this manual. It

will guide you through the installation and the operation of your screen and will also provide you with

detailed instructions on how to care for your screen’s viewing surface.

From all of us at Stewart Filmscreen, we would like to thank you for choosing AT 1.5. Should you have

any questions, please don’t hesitate to contact our customer service department at

1 (310) 784-5300, or toll free at 1 (800) 762-4999. We’re here to help.

Mary Stewart Frank Gomez

CEO and Owner Fixed Frame Masking Specialist

Stewart Filmscreen – AT 1.5

ABOUT THE AT 1.5 SCREEN

The AT 1.5 fixed frame supports all projection applications. The screen features angled corners and a

beveled edge that brings the image area closer to the frame.

The tensioned and grommet mounting

assures perfect lay-flat characteristics of the screen.

The VeluxTM finish is designed to absorb any

projector overscan.

USING THIS MANUAL FOR INSTALLATION

If you are using this manual to install the AT 1.5, you should be aware that it describes procedures for

several types of mounts. You must refer to the section for the type of mounting system you are utilizing.

In addition, there are general instructions for attaching the screen to the frame that are provided in a

separate section. This procedure is to be performed at a specific step in the overall sequence.

For the instructions related to your specific mount type, refer to the appropriate page:

‣Wall Board Mount (page 9)

‣Wall Plate Mount (page 11)

‣Eye Bolt (Hanging) Mount (page 12)

‣T-Stand (Self-Supporting) Mount (page 14)

‣Aperture Mount (page 15)

At the designated point in the installation, you will need to refer to the general instructions for

Attaching the Screen to the Frame, pages (16-18).

Stewart Filmscreen – AT 1.5

PREPARING THE INSTALLATION

Before proceeding with the installation of this screen, take the time to thoroughly read and understand

these installation instructions. Failure to comply with the instructions and guidance contained in this

manual may result in voiding your warranty.

SPECIFICATIONS

Specifications regarding the individual screen dimensions, weight, etc., are provided by the factory

when the unit is ordered.

Before beginning the installation

‣Make sure there is a clean surface on which to unroll the screen and assemble the frame.

‣Check the size and weight of the screen to be installed so that you can plan for the number of people

required for installation. You will need at least two people to mount the smaller screens; more are

needed for larger, heavier screens.

What’s inside the box?

Inside your AT 1.5 unit box, you will find everything you need to get started on enjoying your Stewart

screen:

‣Screen material, rolled up in a tube

‣Disassembled frame with all the hardware needed to reassemble

‣Packing material

‣Specified optional mounting hardware

‣Quick Start Guide

You will need

‣A level

‣A drill

‣A drop cloth

‣Tools for tightening fasteners

‣Lint-free, clean cloth gloves for handling the screen

‣Fasteners appropriate for the surface on which the screen is being mounted

‣Ladders for the personnel supporting the screen during the mounting process

‣Lift or scaffolding, if the screen is to be flown

Stewart Filmscreen – AT 1.5

PREPARING THE INSTALLATION (CONTINUED)

NOTE: Bolts and other fasteners for the screen are standard gauges and sizes used in the U.S.,

regardless of the installation country. For this reason, sizes are in inches rather than metric

measurements.

Unpacking

Be sure to unpack carefully in a clean area. Use special care when handling the screen so that it does not

become soiled or damaged. If you plan to repack your screen and hardware for transportation to another

location, you may wish to photograph or make a note of how it was packed. Keep the packing material.

⚠

CAUTION

Do not stand on the screen tube or store it on its end. This will cause screen damage. If you

are not going to install the screen immediately, make sure it remains horizontal during

storage. Note: Failure to comply with the instructions and guidance contained in this

manual may result in voiding your warranty.

Stewart Filmscreen – AT 1.5

FRAME ASSEMBLY INSTRUCTIONS

1. Connect the frame members by matching numbered dots on the ends of the

members (see Figure 1).

2. Secure the frame members with the supplied 1/4-20 x 3/4” hex head bolts.

Figure 1. Frame Assembly

Detail A. Repeat for all Corners

Stewart Filmscreen – AT 1.5

WALL BOARD MOUNT

NOTE: Professional mounting techniques should be used. Stewart Filmscreen cannot be liable

for substandard or faulty installations. Failure to comply with the instructions and guidance

contained in this manual may result in voiding your warranty.

1. Lay assembled frame face down

on a clean surface (see Figure 2).

2. Fit wall boards to the outside of

the brackets already attached to

the frame.

3. Bolt wall boards to brackets using

the supplied 1/4-20 x 3/4” hex

head bolts (see Figure 3).

Note: Depending on the size of the

screen, the number of wall boards

may vary. This temporary

attachment of the wall boards to the

frame helps to position the frame

and brackets on the wall.

4. Without the screen material

attached, position the frame and

boards on the wall.

5. Make sure the unit is level and

plumb. You may need to use

shims between the boards and

the wall to achieve vertical

plumb.

6. Align the board holes with wall

studs.

7. Mark and drill holes in the wall

that align with the board holes.

Figure 2: Temporarily Attaching

Wall Boards to the Frame

Figure 3: Positioning the Frame

and Wall Boards to the Wall

Wall Boards

Stewart Filmscreen – AT 1.5

WALL BOARD MOUNT (CONTINUED)

8. Remove the boards from

the frame and attach them

to the wall using the

provided hardware where

applicable or other such

appropriate fasteners (lag

bolts, wall anchors, molly

bolts, wood carriage screws,

etc. (refer to Figure 4.)

9. Attach the screen to the

frame (see pages 16-18).

10. Attach the frame/screen

assembly to the previously

mounted wall boards on the

wall using the 1/4-20 x 3/4” hex

head bolts (refer to Figure 5).

Note: On some large custom sized

frames the use of additional “back

support braces” may be included.

These vertical support braces

assure parallel top and bottom

frame member alignment once the

screen has been attached to the

frame. Do not install the

screen/frame without the

required back braces.

Figure 4: Attaching the

Wall Boards to the Wall

Figure 5: Finished Screen

Attached to Wall Boards

⚠

CAUTION

Be careful not to touch or scratch the

viewing surface.

Indice

Altri manuali Stewart Filmscreen Schermo di proiezione

Stewart Filmscreen

Stewart Filmscreen RP-1013 Manuale utente

Stewart Filmscreen

Stewart Filmscreen Visionary Manuale utente

Stewart Filmscreen

Stewart Filmscreen CM-1005 Manuale utente

Stewart Filmscreen

Stewart Filmscreen Cima Istruzioni originali

Stewart Filmscreen

Stewart Filmscreen Fixed Frame Screen Manuale utente

Stewart Filmscreen

Stewart Filmscreen 4-Way ScreenWall ElectriMask Manuale utente

Stewart Filmscreen

Stewart Filmscreen C Manuale utente

Stewart Filmscreen

Stewart Filmscreen Cine-W Manuale utente

Stewart Filmscreen

Stewart Filmscreen Visionary Medio Manuale utente

Stewart Filmscreen

Stewart Filmscreen Luxus Manuale utente

Stewart Filmscreen

Stewart Filmscreen Balon Series Manuale utente

Stewart Filmscreen

Stewart Filmscreen Balon Series Manuale utente

Stewart Filmscreen

Stewart Filmscreen Luxus ScreenWall Series Manuale utente

Stewart Filmscreen

Stewart Filmscreen B Manuale utente

Stewart Filmscreen

Stewart Filmscreen Visionary Electriscreen Manuale utente

Stewart Filmscreen

Stewart Filmscreen Vertical ES EM Manuale utente

Stewart Filmscreen

Stewart Filmscreen AB Electriscree Manuale utente

Stewart Filmscreen

Stewart Filmscreen Balon Series Manuale utente

Stewart Filmscreen

Stewart Filmscreen WallScreen 2.5 Manuale utente

Stewart Filmscreen

Stewart Filmscreen ABT Trapdoor Electriscreen Manuale utente

Stewart Filmscreen

Stewart Filmscreen VistaScope Manuale utente

Stewart Filmscreen

Stewart Filmscreen Luxus Grande S6 Manuale utente

Stewart Filmscreen

Stewart Filmscreen Cabaret Manuale utente

Stewart Filmscreen

Stewart Filmscreen LCD Rear-Projection TV Manuale utente

Manuali Schermo di proiezione popolari di altre marche

FART PRODUKT

FART PRODUKT Standard SCREEN Manuale utente

Draper

Draper E Series Manuale

Elite Screens

Elite Screens Elite Tripod Series Manuale utente

Laarhoven

Laarhoven Companion II Manuale utente

Renogy

Renogy RMS-LFPS-US Manuale utente

Da-Lite

Da-Lite ExecutiveElectrol Manuale utente

Samsung

Samsung S*H65* Manuale utente

FONESTAR

FONESTAR PPTR-43100-FA Manuale utente

Slide Clear

Slide Clear Varro XL Manuale utente

Elite Screens

Elite Screens M85XWS1-SRM Manuale utente

OS РХ-090Н Manuale utente

Niko

Niko 10-845 Manuale utente

Speaka Professional

Speaka Professional 2357532 Manuale operativo

Sima

Sima XL-72 Manuale utente

Jasic

Jasic EVO 2.0 ET-200P Manuale utente

Elite Screens

Elite Screens Starling 2 Series Manuale utente

InFocus

InFocus SC-WALL GRY-92H Manuale

Barco

Barco OverView MVL-615 Manuale utente