Topfield TF 7700 HSCI Manuale utente
TOPFIELD
TF 7700 HSCI
User Guide
High Definition
Digital Satellite Receiver
Extensible to Personal Video Recorder
The lighting flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to consititute a risk of electric shock to a person.
The exclamation point, within an equilateral triangle, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
iv Contents
Contents
Contents iv
1 Introduction 1
1.1 Features ............................... 1
1.2 Controlling the digital receiver .................. 2
1.2.1 The front panel ....................... 3
1.2.2 The remote control ..................... 4
1.3 What is common interface? .................... 6
2 Setup 8
2.1 Unpacking .............................. 8
2.2 Safety precautions ......................... 8
2.3 Rear panel connections ....................... 10
2.4 Connecting up your digital receiver ............... 11
2.4.1 Connecting the antenna .................. 12
2.4.2 Connecting to your television .............. 12
2.4.3 Connecting to your video cassette recorder ....... 15
2.5 Switching on for the first time ................... 15
2.5.1 Inserting batteries in the remote control ......... 15
2.5.2 Powering on and checking picture ............ 16
3 Preference Settings 17
3.1 Language settings .......................... 17
3.2 Video and audio settings ...................... 19
3.2.1 Colour model ........................ 19
Contents v
3.2.2 Video cassette recorder .................. 19
3.2.3 Television aspect ratio ................... 20
3.2.4 High definition television ................. 21
3.2.5 Audio mode ........................ 22
3.3 Local time setting .......................... 22
3.4 Parental control ........................... 25
3.5 Adjusting the on-screen display .................. 26
3.6 To turn on the time shift feature .................. 26
4 Service Search 27
4.1 Searching broadcasting services .................. 27
4.1.1 Configuring LNB settings ................. 27
4.1.2 Configuring DiSEqC 1.2 settings ............. 30
4.1.3 Configuring USALS settings ............... 31
4.1.4 Searching services ..................... 32
4.2 Editing the transponder list .................... 35
4.3 Resetting to factory settings .................... 36
5 Daily Usage 37
5.1 Volume control ........................... 37
5.2 Watching television ......................... 37
5.2.1 The services list ....................... 37
5.2.2 The favourite services list ................. 40
5.2.3 Viewing programme information ............ 41
5.2.4 Selecting audio tracks ................... 42
5.2.5 Selecting subtitle tracks .................. 42
5.2.6 Viewing teletext ...................... 42
5.3 Viewing electronic programme guide .............. 43
5.4 Watching multifeed programme ................. 43
5.5 Using time shift ........................... 44
6 Listing Services 46
6.1 Editing the services list ....................... 46
6.2 Editing the favourite list ...................... 48
6.3 How to use on-screen keyboard .................. 50
6.4 Transferring receiver data ..................... 50
vi Contents
7 Recording and Playing 52
7.1 Recording a programme ...................... 52
7.1.1 Instant recording ...................... 53
7.1.2 Timer recording ...................... 54
7.1.3 Scheduling recordings using the programme guide . . 57
7.1.4 Recording a pay service programme ........... 57
7.2 File archive ............................. 58
7.2.1 To delete a recording .................... 59
7.2.2 To sort recordings ..................... 59
7.2.3 To lock a recording ..................... 59
7.2.4 To rename a recording ................... 60
7.2.5 To make a new folder ................... 60
7.2.6 To move a recording to another folder .......... 60
7.3 Playing back a recording ...................... 60
7.3.1 To navigate using the progress bar ............ 61
7.3.2 To play in slow motion .................. 61
7.3.3 To play in fast motion ................... 62
7.3.4 To make a bookmark .................... 62
7.3.5 To play back a recording repeatedly ........... 62
7.3.6 To play back a scrambled recording ........... 63
7.4 Formatting the hard disk ...................... 63
8 Firmware Update 65
8.1 Checking the firmware information ............... 65
8.2 From a USB memory ........................ 66
8.3 From your computer via RS-232 port ............... 67
8.4 From another digital receiver via RS-232 port .......... 68
8.5 Over the air ............................. 69
Index 70
1
Chapter 1
Introduction
The TF 7700 HSCI digital receiver is fully compliant with the
international Digital Video Broadcasting (DVB) standard, and
thus is able to receive digital broadcasts of that standard. For
its operation you need an antenna, which must be installed
appropriately.
NOTE
In general we equate a channel with a frequency. Unlike ana-
logue broadcasts, however, digital broadcasts are not all as-
signed to their own frequencies; instead, multiple television
broadcasts are transmitted through a single frequency. The fre-
quency in digital broadcasting is usually called transponder. To
reduce confusion in this manual, the word
service
is preferably
used than
channel
as a term to indicate one television or radio
broadcast.
1.1 Features
The TF 7700 HSCI digital receiver has the following features:
•
Supports DiSEqC 1.0, DiSEqC 1.1, DiSEqC 1.2 and US-
ALS.
2 Introduction
• Can store up to 5000 television and radio services.
• You can edit the services list.
•
You can create favourite lists of your favourite services.
•
You can view information about the current television or
radio programme.
•
Has an electronic programme guide that provides an
overview of scheduled programmes.
•
If you have an external hard disk drive connected to
the digital receiver via the USB port, you can record
television programmes into it.
1.2 Controlling the digital receiver
You can operate the digital receiver with the remote control
and the buttons on the front panel.
NOTE
When the digital receiver is off but plugged into a wall outlet,
we say that it is in standby mode; on the other hand, when it is
on, it is in operation mode. Even when you are not using the
digital receiver, you should keep it plugged into a wall outlet
to be in standby mode so that it can run timer events at any
time.
1.2 Controlling the digital receiver 3
1.2.1 The front panel
The front panel of the digital receiver has buttons to control the
digital receiver, and specific lamps and a display to indicate its
status. The following indicates what they mean.
STANDBY
button switches the digital receiver between
standby mode and operation mode.
CHANNEL
c
,
a
buttons switch to previous or next service.
They are also used to navigate in menus and interactive
screens.
VOLUME
b
,
d
buttons decrease or increase the volume.
They are also used to change values for menu options.
Front display
displays the current time in standby mode,
and displays the current service in operation mode.
4 Introduction
1.2.2 The remote control
14
14
18
16
9
12
2
17
3
5
10
35
25
28
29
24
19
31
15
7
6
11
13
20
3
8
21
27
26
22
23
36
30
32
34
33
5
1
button switches the digital re-
ceiver between standby mode and
operation mode.
2
is used to set a sleep timer in 10
minute increments.
3
V−
,
V+
buttons decrease or in-
crease the volume. They are also
used to change values for menu op-
tions.
4
mutes the sound. Press again
to switch it back on.
5
P−
,
P+
buttons switch to previous
or next service. They are also used
to navigate in menus and interac-
tive screens.
6
switches between the current
service and the previously viewed
one.
7
Numeric buttons are used to en-
ter a service number for service
change or to specify values for
menu options.
8
OK
displays the services list. See
§
5.2.1 for more details. It is also
used to select a menu item.
9
FAV displays the favourite lists.
10
displays the service information box. It is also used
to display more information about a programme.
11
is used to select an audio track and a sound mode, or
Altri manuali per TF 7700 HSCI
1
Indice
Altri manuali Topfield Ricevitore
Topfield
Topfield TF4000COC Manuale utente
Topfield
Topfield TF 6000 VI Manuale utente
Topfield
Topfield TF 7700 HTCO Manuale utente
Topfield
Topfield SRP-2100 Manuale utente
Topfield
Topfield TF 6000 CR Manuale utente
Topfield
Topfield TF 6000 COT Manuale utente
Topfield
Topfield TF 6000 PVRt Manuale utente
Topfield
Topfield TF 400 PVRt Manuale utente
Topfield
Topfield TF 5500 PVR Manuale utente
Topfield
Topfield TF6500F Manuale utente
Topfield
Topfield TF 5100 PVR Manuale utente
Topfield
Topfield CRC-2400 Manuale utente
Topfield
Topfield CBC-5200 Manuale utente
Topfield
Topfield TRF-7260 Manuale di servizio
Topfield
Topfield TF6000T Manuale utente
Topfield
Topfield TF 4000 Fi Manuale utente
Topfield
Topfield CRC-1400 Manuale di servizio
Topfield
Topfield SRP-2110 Manuale utente
Topfield
Topfield TF-S3000CHD Manuale utente
Topfield
Topfield TRF-7170 Manuale utente
