TRAMEX THE DETERMINATOR CMP Manuale utente
GENERAL
The Determinator and CME5, CMEX5 (or older
Tramex Concrete Meters CME4 and CMEX2)
allow for a unified gravimetric-based testing
method of moisture content (%MC) both on the
surface and within the body of the concrete.
%MC readings for both the in-situ and the
non-destructive surface tests eliminate
confusion between different testing method
data.
The Determinator conductive probes are
reusable, extendable, and require no plastic
hole liners.
The hole diameter required (¾”, 19mm) is the
same for the Hygro-i2 RH test as per F2170.
The Concrete Moisture Probe consists of a
cradle, a probe tip and two extension segments.
Choose to use the extension segment(s), or not,
depending on the depth of the slab. The probe
should be inserted to approximately 40% of
the depth of the slab.
•
•
•
•
•
•
ASSEMBLY
1¼” 2” 1”
Probe Testing:
Determine the approximate depth of the
concrete slab.
Connect extension segment(s) to appropriate
depth:
Concrete between 2" to 4" in depth shall
require approximately 1 1/4" of probe depth.
Concrete between 4” to 6” in depth shall
require approximately 2 1/4” of probe depth.
Concrete between 6” to 9” in depth shall
require approximately 3 1/4” of probe depth.
Concrete between 9" to 11" in depth shall
require approximately 4 1/4" of probe depth.
* The probe should be inserted to approxi-
mately 40% of the depth of the slab.
* Similar to ASTM F2170 Recommendations
for frequency of use: 3 Tests per 1,000
sq.ft. and 1 additional test for every addi-
tional 1,000 sq.ft. or partition thereof.
Insert the Concrete Moisture Probe into the
hole so that the cradle is flat on the surface.
•
•
•
•
•
•
•
OPERATION
www.tramexmeters.com
•
USER GUIDE ONLINE
Please use the following link or QR code to
access the complete User Guide online:
https://l.ead.me/bbjrrb
Free App Available for Mobile and Tablet:
LI-CMPQSG
OPERATION
•
•
•
Place yourTramex Concrete meter into the
cradle of the CMP and ensure that all of the
electrode spring-loaded pins are fully
compressed, both on the CMP and the CME.
Take 4 readings by turning the Concrete
Moisture Probe and CME meter from ‘12
o’clock’ to 3, 6 and 9 o’clock positions. Record
the highest reading, discarding any obvious
anomalies.
Record the readings using the Tramex Meters
App (when using the CME5 or CMEX5).
Indice
Altri manuali TRAMEX Strumento di misura
TRAMEX
TRAMEX MEX5 Manuale utente
TRAMEX
TRAMEX CME 4 Manuale utente
TRAMEX
TRAMEX CME 4 Manuale utente
TRAMEX
TRAMEX MEX5 Manuale utente
TRAMEX
TRAMEX ME5 Manuale utente
TRAMEX
TRAMEX SKIPPER 5 Manuale utente
TRAMEX
TRAMEX CME5 Manuale utente
TRAMEX
TRAMEX Moisture Encounter Plus Manuale utente
TRAMEX
TRAMEX CMEX5 Manuale utente
TRAMEX
TRAMEX cmeXpert 2 Manuale utente
TRAMEX
TRAMEX MRH III Manuale utente
TRAMEX
TRAMEX CME5 Manuale utente
TRAMEX
TRAMEX RWS Manuale utente
TRAMEX
TRAMEX CME5 Manuale utente
TRAMEX
TRAMEX CME 4 Manuale utente
TRAMEX
TRAMEX ME5 Manuale utente
TRAMEX
TRAMEX Moisture Encounter Plus Manuale utente
TRAMEX
TRAMEX CMEX II Manuale utente
TRAMEX
TRAMEX ME5 Manuale utente
TRAMEX
TRAMEX CME 4 Manuale utente
