TRAMEX CME 4 Manuale utente

CME4

Concrete Moisture Encounter

www.tramexmeters.com

QUICK START GUIDE

•

TROUBLESHOOTING

Battery is low and will soon need to be

replaced with an Alkaline battery.

Single LED ﬂashing and meter frozen.

CME4 is in HOLD mode.

Press HOLD button to release.

Both LED’s ﬂashing when unit is powered up.

USER GUIDE ONLINE

Please use the following link or QR code to

access the complete User Guide online:

http://l.ead.me/bav1ez

LI-CME4GFSQSGUS

OPERATION

•

Press the ON/OFF button.

Lower LED will remain continuously lit.

Press CME4 fully aginst the surface of the

concrete slab or screed. (Surface should be

smooth and free of coatings/contaminants)

Readings are instant and dispayed on analog

dial.

To freeze readings press the HOLD button once.

In HOLD mode the upper LED will ﬂash continu-

ously. If CME4 is shut down in HOLD it will retain

the stored reading when powered up next and

remain in HOLD with the upper light ﬂashing

until the button is pressed again.

Automatic power timeout (10 mins) conserves

battery life.

SCALES

•

Top Scale - Red - for use with Concrete Slabs

& Sand/Cement screeds.

•

Middle Scale - Yellow - for use on Gypsum

Floor/Screeds.

•Equivalent reading to Moisture Content

(MC%) or moisture by mass/weight as

per the oven dry/gravimetric method.

Reference readings replicating measure-

ments using concrete scale on concrete &

sand/cement ﬂoors/screeds.

Bottom Scale - 0-100 - intended for use with

materials other than concrete & screeds, such

as stone & tiles etc.

This scale is for reference only and is not

to be interpreted as moisture content or

relative humidity.

Product Code: CALCRH

CALIBRATION & WARRANTY

Obtain Warranty online:

tramexmeters.com/register

Annual calibrations are recommended as

best practice to ensure continued accuracy

and reliability. Calibration Check Plates can

be purchased for more regular checks. The

Tramex Calibration Check Plate can be used

to test the CME4 & CMEX2 instruments.

Altri manuali per CME 4

Altri manuali TRAMEX Strumento di misura

TRAMEX

TRAMEX SKIPPER 5 Manuale utente

TRAMEX

TRAMEX CME 4 Manuale utente

TRAMEX

TRAMEX MRH III Manuale utente

TRAMEX

TRAMEX MEX5 Manuale utente

TRAMEX

TRAMEX SKIPPER 5 Manuale utente

TRAMEX

TRAMEX CME 4 Manuale utente

TRAMEX

TRAMEX Moisture Encounter Plus Manuale utente

TRAMEX

TRAMEX RWS Manuale utente

TRAMEX

TRAMEX Skipper Plus Manuale utente

TRAMEX

TRAMEX CME 4 Manuale utente

TRAMEX

TRAMEX CME5 Manuale utente

TRAMEX

TRAMEX cmeXpert 2 Manuale utente

TRAMEX

TRAMEX ME5 Manuale utente

TRAMEX

TRAMEX CME 4 Manuale utente

TRAMEX

TRAMEX MEP Manuale utente

TRAMEX

TRAMEX PROFESSIONAL PTM 2.0 Manuale utente

TRAMEX

TRAMEX MEX5 Manuale utente

TRAMEX

TRAMEX CME 4 Manuale utente

TRAMEX

TRAMEX Skipper Plus Manuale utente

TRAMEX

TRAMEX CME5 Manuale utente

TRAMEX

TRAMEX CONCRETE MOISTUREENCOUNTER X5 Manuale utente

TRAMEX

TRAMEX PROFESSIONAL PTM 2.0 Manuale utente

TRAMEX

TRAMEX ME5 Manuale utente

TRAMEX

TRAMEX MRH III Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente