Uplus Lighting W3725 Manuale utente

User manual

W3725

Please read the instructions carefully before use

TABLE OF CONTENTS

1. Safety Instructions……………………………………………………………………………3-4

Technical Specifications…………………………………………………………………………4

Control Menu ……………………………………………………………………………………5-6

DMX Channels ……………………………………………………………………………………6-8

Dimension …………………………………………………………………………………………9

Trouble Shooting…………………………………………………………………………………10

Fixture Cleaning………………………………………………………… ………………………10

STATEMENT

The product has well capability and intact packing when leave factory. All of the user should

comply with warning item and manual, any misuse cause of the damages are not included in our

guarantee, and also can not be responsible for any malfunction & problem owing to ignore the

manual.

1.Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction booklet.

•Unpack and check carefully there is no transportation damage before using the unit.

•Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

•It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

•The unit is for indoor use only. Use only in a dry location.

•The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces. Be sure that no ventilation slots are blocked.

•Disconnect main power before replacement or servicing.

•Make sure there are no flammable materials close to the unit while operating as it is fire hazard.

•Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always

by taking its base.

•Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher

than this Unit surface temperature may reach up to 85℃. DO NOT touch the housing bare-hand

during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before

replacing or serving.

•the event of serious operating problem, stop using the unit immediately.Never try to repair the unit

by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center. Always use the same type spare parts.

•DO NOT touch any wire during operation as high voltage might be causing electric shock.

Warning:

•To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

•The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

Caution:

•There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any

repairs yourself. In the unlikely event your unit may require service, please contact your nearest

dealer.

Installation:

•The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly

fixed to avoid vibration and slipping while operating. And make sure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also

always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.

•The equipment must be fixed by professionals. And it must be fixed at a place where is out of the

touch of people.

2.Technical Specifications

Power supply: 110-240V, 50/60HZ

Power consumption: 850W

Light source:37x25W 4inl RGBW LED

DMX Channel:19/36CH

Zoom angle: 10°- 60 °

Horizontal scanning: 540° (16bit precision scanning) Electronic error correction

Vertical scanning: 270° (16bit precision scanning) Electronic error correction

Construction

Data In/Out : 3-pin XLP socket

Power in/Out : Power Con in / out

Protection Rating: IP20

Strobe: 1-25 times/S or random strobe

Dimming: 0-100% linear adjustment

Dimensions : 465*410*200mm

N Weight: 16.2kgs

3.Control Menu

1. Function Display:

Shows the various menus and the selected functions

2.LED：

POWER

Power On

DMX

DMX input present

3. Button:

To select the programming functions

DOWN

To go backward in the selected functions

To go forward in the selected functions

ENTER

To confirm the selected functions

4. DMX IN:

DMX512 link, use 3/5‐pin XLR cable to link the unit and the DMX controller

5. DMX OUT:

DMX512 link, use 3/5‐pin XLR cable to link the next unit and output DMX signal

6. MAINS IN:

PowerCon connection from main power supply

7. MAIS OUT:

PowerCon loop connection for main power supply to the next unit

8. Fuse (T 10A):

Protects the unit from over‐voltage or short circuit

To select any of the given functions, press the MENU button until the required function is showing on the display.

Select the function by pressing the ENTER button and the display will blink. Use the

DOWN/UP buttons to change the mode. Once the required mode has been selected, press the ENTER button to

setup, to go back to the functions without any change press the MENU button again. Press and hold the MENU

button for about one second or wait for one minute to exit the menu mode.

The main functions are shown overleaf:

4.DMX Channels

19 CH Mode

19CH

Function

DMX Values

Details

CH1

Pan

0-255

0-540°

CH2

Pan Fine

0-255

16 bit

CH3

Tilt

0-255

0-270°

CH4

Tilt Fine

0-255

16 bit

CH5

P/T speed

0-255

From slow to fast

CH6

Zoom

0-255

wide to narrow

CH7

SPECIAL FUNCTIONS

000‐009

No function

010‐014

Reset

015‐255

No function

CH8

Dimmer

0-255

Linear dimmer （dark to brightness)

CH9

shutter effect

000‐019

Blackout

020‐024

Open

025‐064

Strobe 1: fast slow

CH9

shutter effect

065‐069

Open

070‐084

Strobe 2: opening pulse, fast slow

085‐089

Open

090‐104

Strobe 3: closing pulse, fast slow

105‐109

Open

110‐124

Strobe 4: random strobe, fast slow

125‐129

Open

130‐144

Strobe 5: random opening pulse, fast slow

145‐149

Open

150‐164

Strobe 6: random closing pulse, fast slow

165‐169

Open

170‐184

Strobe 7: burst pulse, fast slow

185‐189

Open

190‐204

Strobe 8: random burst pulse, fast slow

205‐209

Open

210‐224

Strobe 9: sine wave, fast slow

225‐229

Open

230‐244

Strobe 10: burst, fast slow

245‐255

Open

CH10

Red

0-255

0- 100%

CH11

Green

0-255

0- 100%

CH12

Blue

0-255

0- 100%

CH13

White

0-255

0- 100%

CH14

COLOR

000-255

COLOR

CH15

COLOR CHANGE SPEED

000-255

COLOR CHANGE SPEED (OPEN 17-CH 020-029)

CH16

COLOR FADE SPEED

000-255

COLOR FADE SPEED (OPEN 17-CH 030-039)

CH17

COLOR MARCO

0-19

Overall Control

20-29

Color Change

30-39

Color Gradient Change

40-255

Built-in programs

CH18

MARCO SPEED

0-255

MARCO SPEED (OPEN 17-CH 040-255)

CH19

COLOR TEMPERATURE

0-255

COLOR TEMPERATURE

36 CH Mode

36CH

Function

DMX Values

Details

CH1

Pan

0-255

0-540°

CH2

Pan Fine

0-255

16 bit

CH3

Tilt

0-255

0-270°

CH4

Tilt Fine

0-255

16 bit

CH5

P/T speed

0-255

From slow to fast

CH6

Zoom

0-255

wide to narrow

CH7

SPECIAL FUNCTIONS

000‐009

No function

010‐014

Reset

015‐255

No function

CH8

Dimmer

0-255

Linear dimmer （dark to brightness)

CH9

shutter effect

000‐019

Blackout

020‐024

Open

025‐064

Strobe 1: fast slow

065‐069

Open

070‐084

Strobe 2: opening pulse, fast slow

CH9

shutter effect

085‐089

Open

090‐104

Strobe 3: closing pulse, fast slow

105‐109

Open

110‐124

Strobe 4: random strobe, fast slow

125‐129

Open

130‐144

Strobe 5: random opening pulse, fast slow

145‐149

Open

150‐164

Strobe 6: random closing pulse, fast slow

165‐169

Open

170‐184

Strobe 7: burst pulse, fast slow

185‐189

Open

190‐204

Strobe 8: random burst pulse, fast slow

205‐209

Open

210‐224

Strobe 9: sine wave, fast slow

225‐229

Open

230‐244

Strobe 10: burst, fast slow

245‐255

Open

CH10

Red 1

0-255

0- 100%

CH11

Green 1

0-255

0- 100%

CH12

Blue 1

0-255

0- 100%

CH13

White 1

0-255

0- 100%

CH14

COLOR 1

0- 100%

CH15

Red 2

0-255

0- 100%

CH16

Green 2

0-255

0- 100%

CH17

Blue 2

0-255

0- 100%

CH18

White 2

0-255

0- 100%

CH19

COLOR 2

0- 100%

CH20

Red 3

0-255

0- 100%

CH21

Green 3

0-255

0- 100%

CH22

Blue 3

0-255

0- 100%

CH23

White 3

0-255

0- 100%

CH24

COLOR 3

000-255

0- 100%

CH25

RING MARCO

092‐099

RING MARCO

CH26

RING MARCO SPEED

100‐106

RING MARCO SPEED

CH27

COLOR TEMPERATURE

107‐113

COLOR TEMPERATURE

CH28

RED

114‐121

RED

CH29

GREEN

122‐128

GREEN

CH30

BLUE

129‐136

BLUE

CH31

WHITE

137‐143

WHITE

CH32

COLOR

144‐151

COLOR

CH33

COLOR CHANGE SPEED

152‐158

COLOR CHANGE SPEED (OPEN 35-CH 020-029)

CH34

COLOR FADE SPEED

159‐165

COLOR FADE SPEED (OPEN 35-CH 030-039)

CH35

COLOR MARCO

000-009

Ring Control

010-019

Overall Control

020-029

Color Change

030-039

Color Gradient Change

040-255

Built-in programs

CH36

MARCO SPEED

000-255

MARCO SPEED (OPEN 35-CH 040-255)

5.Dimension

6.Trouble Shooting

ollo

ing

few

oble

y occu

uring

ope

tion

. He

tion

leshooting

The

does

work

, no

ght

Check

nect

ion of p

owe

eas

ure

ins

volt

Check

pow

LED

responding

LED

on.

che

nectors,

link

ope

If th

nd no

espons

el,

che

ess

etti

s a

ity

nter

ittent

oble

che

ins

onn

ecto

PCB

nit

the

iou

ntroller

Check

or run

lon

volta

les

terfer

ence

inter

face

circui

. One

the

cha

ing

tep

moto

dam

the

nect

to th

PCB

oken.

oto

’

ive

PCB

ndition

7.Fixture Cleaning

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to

optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,

smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.

Clean with soft cloth using normal glass cleaning fluid.

Always dry the parts carefully.

Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.

Indice

Altri manuali Uplus Lighting Attrezzatura di illuminazione

Uplus Lighting

Uplus Lighting MINI740 Manuale utente

Uplus Lighting

Uplus Lighting W1925 Manuale utente

Uplus Lighting

Uplus Lighting 200 MZ-SPOT PR Manuale utente

Uplus Lighting

Uplus Lighting 3010 IP PAR Manuale utente

Uplus Lighting

Uplus Lighting 150COBPAR Manuale utente

Uplus Lighting

Uplus Lighting 200 LED BSW Manuale utente

Uplus Lighting

Uplus Lighting LED PROFILE FIX Manuale utente

Uplus Lighting

Uplus Lighting 400 IP BLINDER Manuale utente

Uplus Lighting

Uplus Lighting 250 BEAM Manuale utente

Uplus Lighting

Uplus Lighting 10X30 COB BAR Manuale utente

Uplus Lighting

Uplus Lighting 200 LED BSW Manuale utente

Uplus Lighting

Uplus Lighting PF350 Manuale utente

Uplus Lighting

Uplus Lighting 37X15ZWASH Manuale utente

Uplus Lighting

Uplus Lighting 4020 IP Manuale utente

Uplus Lighting

Uplus Lighting COB400 ZOOM Manuale utente

Uplus Lighting

Uplus Lighting 460LED BSW Manuale utente

Uplus Lighting

Uplus Lighting BSW 350 Manuale utente

Uplus Lighting

Uplus Lighting 750 BSWF Manuale utente

Uplus Lighting

Uplus Lighting MIX560 Manuale utente

Uplus Lighting

Uplus Lighting MH12X40 PIXEL BAR Manuale utente

Uplus Lighting

Uplus Lighting RETRO 360 Manuale utente

Uplus Lighting

Uplus Lighting BR360 Manuale utente

Uplus Lighting

Uplus Lighting IR 1210 PAR Manuale utente

Uplus Lighting

Uplus Lighting 200 LED RETRO Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente