Safety Information
Warning! This product is not for household use.
Read this manual before installing and operating the LabFlicker. Follow the safety
warnings listed below and study all the cautions in the manual. If the device or the
power supply are in any way damaged, defective, wet, or show signs of overheating,
disconnect the power supply from the AC power and contact Viso Systems Service
for assistance. Do not install or use the device outdoors. Do not spray with or
immerse in water or any other liquid. Do not remove any covers or attempt to repair
the controller or the power supply. Refer any service to Viso Systems.
Disposing of this Product
Viso Systems products are supplied in compliance with Directive 2002/96/EC of the
European Parliament and of the Council of the European Union on WEEE (Waste
Electrical and Electronic Equipment), as amended by Directive 2003/108/EC, where
applicable. Help preserve the environment! Ensure that this product is recycled at
the end of its lifetime. Your supplier can give details of local arrangements for the
disposal of Viso Systems products.
Introduction
About the LabFlicker
The LabFlicker expands the capability of the Viso Systems Goniometers series to
measure the light modulations (Temporal Light artefacts) using the same Light
Inspector software. The device is easily connected to the computer via USB and is
automatically detected by the Light Inspector software.
About this document
These guidelines describe the installation process of the LabFlicker and how to use it
with any of Viso Systems’photogoniometers.
© 2007 Viso Systems ApS, Denmark
All rights reserved. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from Viso Systems ApS, Denmark. Information subject to change
without notice. Viso Systems ApS and all affiliated companies disclaim liability for any injury,
damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by
the use of, inability to use or reliance on the information contained in this manual.
