Vitek VTC-BHOCRAZ Manuale utente
VITEK
VITEK
FEATURES:
• 1/2.9” Sony® CMOS
• 2.1 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M)
• Up to 30fps live view@ 1920x1080 (1080p)
• MegaPixel IR Corrected 3-9mm (VTC-BHOCRAZ39) / 9-22mm (VTC-
BHOCRAZ922) Varifocal Lens
• Mechanical IR Cut Filter (True Day/Night)
• 16:9 Video format
• On-board Intelligence (OBI Technology) delivers Auto-Focus-Zoom by
tracking motion, then optically zooming into that area of the frame
• Fully programmable advanced WDR
• 40 850nm IR LEDs with up to 150’ IR range
• Integrated Cooling Fan
• Advanced OSD Functions: Motion Activated Pointing Zoom, Defog, Dynamic
IR, BLC/HLC, Motion Deblur, Pixel Defect Compensation, Title Set, Mirror,
Flip
• 100% Pure Digital Transmission of video data
• Up to 700’ HD Transmission Range (Depending on cable characteristics and
integrity)
• Heavy Duty IP68 rated weather/vandal resistant
aluminum construction
• 12VDC / 24VAC Dual Voltage Operation
VTC-BHOCRAZ
2.1MP HD-SDI Vandal Resistant
AFZ/WDR IR Bullet Camera
2
Safety Precaution
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment . This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons .
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent electrical shock and/or fire hazard, use only specified power
source.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
3
Safety Precaution
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
The camera should never be operated in water.
Avoid installing in areas where shock or vibration may occur.
Pay attention to safety when installing the connection cable and observe that the
cable is not subjected to heavy loads, kinks or damage and no moisture can get in.
This can lead to damage to the camera and void the warranty.
Never open the device no user serviceable parts
4
Contents
Safety Precaution
Contents
Features
Dimensions
Part Names
Installation Instructions
Operating Instructions
Specifications
p. 02 - 03
p. 04
p. 05 - 06
p. 06
p. 07
p. 08
p. 09 - 11
p. 12 - 25
p. 26
Optional Dome Mounts
Package Includes
p. 29
Warranty
5
Key Features
Features
• Full HD, 2Mega Pixel HD-SDI CAMERA, 1920x1080(30p/25p)
• True WDR(Wide Dynamic Range)
• Improved Noise reduction with the enhanced 3D-NR
• VTC-BHOCRAZ39: f=3~9mm, F1.2~F2.1 Day&Night zoom lens
(Optical 3x Auto focus zoom / Digital 32x zoom)
• VTC-BHOCRAZ922: f=9~22mm, F1.6~F2.3 Day&Night zoom lens
(Optical 2.4x Auto focus zoom / Digital 32x zoom)
• Focusig Status Indicator on Screen
- ★(Blue) Focusing in process
-★(White) Focusing Completed
• Dual Filter Switching
• Pointing Zoom which enables the exible zooming at any area.
• Smart Motion Zoom in combining with Pointing Zoom.
• Selectable Scale down image to 720p mode
• Motion Detection, Privacy Mask, Defog, Sens-up(x32), BLC/HLC,
H/V/HV Flip, D-Zoom(1.1x~8x), LSC(Lens Shade Compensation),
Motion Deblur, Pixel Defect Compensation
• ID / TITLE / ZOOM RATIO DISPLAY
• Enhanced light Sensitivity by DSS technology
• Top performance at low light sensitivity (Sens-up On)
• OSD menu & Video sub-out for easy installation & maintenance.
• Circuit protection against faulty connection in power polarity
• Isolated power supply against ground loop problem
• Remote control via RS-485 (Pelco-D/P)
• Built-in 40 LEDs
• One-touch 3-Axis locking bracket, Easy installation Pad
• Built-in cooling Fan & Heating function
• IP68 protection
6
This camera realizes the natural and crisp image as you see the scene in front
of you by adopting Auto Focus Full HD(1920x1080p) camera module.
Features
General Description
Package Includes
VTC-BHOCRAZ Camera General Operation
Instructions
Complete Installation and
Operation Instructions on CD
• With ICR mechanism
- Enhances its sensitivity about 10x at night time
- Can accept infrared light
• 24VAC/12VDC dual power
- Offers the exibility of installation
- Ensures the reliability
Mounting Template
Torque Wrench:
3mm (1pc)
Video Sub-out
Cable (1pc)
Assembly Screw:
4 x 14mm (4pcs)
Mounting Screw:
4 x 30mm (4pcs)
Plastic Anchor:
6 x 30mm (4pcs)
Easy
Bracket
7
(unit: inches)
Dimensions
3.15
3.31
3.53
4.35
3.39
10.11
3.94
4.37
8
Part Names
CAUTION
Torque
wrench
Lock/Unlock
Screw
• Adjustment of viewing angle
with one-touch 3-Axis bracket
• Extreme care should be taken NOT to scratch the
window in front of lens while installing or adjusting
the camera.
• Care should be taken the cable is NOT damaged,
kinked or exposed in a hazardous area.
• Do not expose the camera lens directly to a strong
light source such as the sun or a spot light.
DUAL WINDOW
SUNSHIELD BOLT
SUNSHIELD
FRONT CASE
OSD Setup
CONTROL COVER
BRACKET
REAR CASE
POWER AND VIDEO CABLE
9
Installation Instructions
1. Locate the mounting template at the installation position and drill the ceiling
or wall if needed. (*The easy bracket can not be installed on the ceiling)
2. Place the easy bracket on pre-drilled position and attach using mounting
screws(4x30mm). Skip this step when an easy bracket is not installed.
3. Route the power cable to the connecting place.
Hook up the camera bracket with the easy bracket as illustrated below.
4. Attach the camera bracket using the assembly screws (4x14mm).
5. Set the camera’s viewing angle.
6. Attach the sunshield to the camera unit and tighten the sunshield-bolt.
Mounting Screw
: 4x30mm
Plastic Anchor
: 6x30mm
1
2
Torque Wrench
REAR VIEW
3
Cable exit
4
Assembly Screw
: 4x14mm
10
Limit of pan & tilt
Installation Instructions
90¡ 90¡
80¡
90¡
–90¡
• Unlock the screw on the camera bracket using the torque wrench supplied
• Set the camera’s viewing angle then lock the screw on the bracket.
1) Pan limit:
Pan is limited to +/- 90°.
2) Tilt limit:
Tilt is limited to 0°(2°) min ~ 90° max.
for wall(ceiling) installation respectively
with reference to the wall(ceiling) when
the inclination of camera module is 0°,
that is, the image is aligned horizontally.
3) Inclination limit
(Horizontal image alignment):
Inclination limited to +/-90° max.
Indice
Altri manuali Vitek Telecamera di sicurezza
Vitek
Vitek VTC-TNT4FL-2 Manuale utente
Vitek
Vitek Virtuoso Series 8 Manuale utente
Vitek
Vitek VTC-TNT2HR3F2 Manuale utente
Vitek
Vitek VTC-TTAB42R2F Manuale utente
Vitek
Vitek VTC-T4T3HR2MD Manuale utente
Vitek
Vitek VTD-MD2-4 Manuale utente
Vitek
Vitek STARLIGHT VTC-IRM30-2812 Manuale utente
Vitek
Vitek XPRESS SERIES Manuale utente
Vitek
Vitek VTC-IR1600 Manuale utente
Vitek
Vitek VTD-VPH266 Manuale utente
Vitek
Vitek Transcendent 5 Series Manuale utente
Vitek
Vitek Transcendent VTC-TNB2LPR Manuale utente
Vitek
Vitek TRANSCENDENT VT-TPTZ10HRF-2T Manuale utente
Vitek
Vitek VT-PTZ220N Manuale utente
Vitek
Vitek VTD-C410 Manuale utente
Vitek
Vitek VT-PTZ12WH Manuale utente
Vitek
Vitek VTC-TNT5RFEB-2 Manuale utente
Vitek
Vitek VT-TPTZ25HRAN-8PNL Manuale utente
Vitek
Vitek VTC-LED667CB Manuale utente
Vitek
Vitek VT-TPTZ10HR-2A4 Manuale utente
