Waldorf BPB8080E Manuale utente
Installation and Operation Manual
Electric Bratt Pan
Date Purchased
Serial Number
Dealer
Service Provider
228687-12
For use in GB & IE
BP8080E BPL8080E BPB8080E BPLB8080E
BP8080EE BPL8080EE BPB8080EE BPLB8080EE
BP8120E BPL8120E BPB8120E BPLB8120E
BP8120EE BPL8120EE BPB8120EE BPLB8120EE
The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized previously in
writing by the manufacturer.
In line with policy to continually develop and improve its products, Moffat Ltd. reserves the right to change the specifications and
design without prior notice. © Copyright Moffat Ltd. November 2014.
MANUFACTURED BY
Moffat Limited
Rolleston 7675
New Zealand
INTERNATIONAL CONTACTS
AUSTRALIA
Moffat Pty Limited
Web: www.moffat.com.au
E.Mail: [email protected]
Main Office: (tel) +61 (03) 9518 3888
(fax) +61 (03) 9518 3833
Service: (tel): 1800 622 216
Spares: (tel): 1800 337 963
Customer Service: (tel): 1800 335 315
(fax): 1800 350 281
CANADA
Serve Canada
Web: www.servecanada.com
E.Mail: [email protected]
Sales: (tel): 800 551 8795 (Toll Free)
Service: (tel): 800 263 1455 (Toll Free)
NEW ZEALAND
Moffat Limited
Web: www.moffat.co.nz
E.Mail: [email protected]
Main Office: (tel): 0800 663328
UNITED KINGDOM
Blue Seal
Web: www.blue-seal.co.uk
E.Mail: [email protected]
Sales: (tel): +44 121 327 5575
(fax): +44 121 327 9711
Spares: (tel): +44 121 322 6640
(fax): +44 121 327 9201
Service: (tel): +44 121 322 6644
(fax): +44 121 327 6257
UNITED STATES
Moffat
Web: www.moffat.com
Sales: (tel): 800 551 8795 (Toll Free)
(tel): +1 336 661 1556
(fax): +1 336 661 9546
Service: (tel): 800 858 4477 (Toll Free)
(tel): +1 336 661 1556
(fax): +1 336 661 1660
REST OF WORLD
Moffat Limited
Web: www.moffat.co.nz
E.Mail: [email protected]
Contents
Waldorf Electric Bratt Pan
BP(L)(B)8080E Bratt Pan Manual Tilt, (80 ltr)
BP(L)(B)8080EE Bratt Pan Electric Tilt, (80 ltr)
BP(L)(B)8120E Bratt Pan Manual Tilt, (120 ltr)
BP(L)(B)8120EE Bratt Pan Electric Tilt, (120 ltr)
Introduction ................................................................................................. 2
Specifications ............................................................................................... 3
Model Numbers Covered in this Specification
General
Electrical Supply Requirements
Electrical Connection
Water Supply Requirements
Dimensions
Installation.................................................................................................... 9
Installation Requirements
Unpacking
Location
Clearances
Assembly
Electrical Connection
Water Connection
Commissioning
Operation .................................................................................................... 12
Operation Guide
Description of Controls
Turning ‘On’ the Main Element and Setting the Desired Temperature
Water
Tilting the Pan
Turning ‘Off’ the Main Element
Cleaning and Maintenance.......................................................................... 15
General
After Each Use
Daily Cleaning
Weekly Cleaning
Periodic Maintenance
Fault Finding ............................................................................................... 17
Wiring Schematic........................................................................................ 18
Replacement Parts List ............................................................................... 20
2
We are confident that you will be delighted with your WALDORF ELECTRIC BRATT PAN, and it will become
a most valued appliance in your commercial kitchen.
To ensure you receive the utmost benefit from your new WALDORF Appliance, there are two important
things you can do.
Firstly:
Please read the instruction book carefully and follow the directions given. The time taken will be well
spent.
Secondly:
If you are unsure of any aspect of the installation, instructions or performance of your appliance,
contact your WALDORF dealer promptly. In many cases a phone call could answer your question.
CE Only:
These instructions are only valid if the country code appears on the appliance. If the code does not
appear on the appliance, refer to the supplier of this appliance to obtain the technical instructions for
adapting the appliance to the conditions for use in that country.
WARNING:
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY
DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS APPLIANCE.
WARNING:
GREAT CARE MUST BE TAKEN BY THE OPERATOR TO USE THE EQUIPMENT SAFELY TO GUARD IT AGAINST RISK
OF FIRE:-
THE APPLIANCE MUST NOT BE LEFT ON UNATTENDED.
ITIS RECOMMENDED THAT AREGULAR INSPECTION IS MADE BY ACOMPETENT SERVICEMAN TO ENSURE
CORRECT AND SAFE OPERATION OF YOUR APPLIANCE IS MAINTAINED.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPOURS OR LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.
C
AUTION
:
This appliance is;
For professional use and is to be used by qualified persons only.
Only qualified service persons are to carry out installation and servicing
operations.
Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.
DO NOT operate the appliance without the legs supplied fitted.
Introduction
3
Specifications
Model Numbers Covered in this Specification
BP[1]8080E/EE - Electric Bratt Pan Manual/Electric Tilt, 900 mm wide (80 ltr).
BP[1]8120E/EE - Electric Bratt Pan Manual/Electric Tilt,1200 mm wide (120 ltr).
NOTE:
[1]: - Model Options;
- - Standard.
L - Low Back.
B - Bold Front.
LB - Low Back and Bold Front.
General
BP8080E / EE (80 ltr) Models.
A commercial heavy duty, electric fired Bratt Pan fitted with an 80 ltr capacity pan, of full stainless steel
pan construction, with 3 x 4 kW stainless steel sheathed elements clad to the pan base giving even heat
distribution. This appliance features an electric thermostat burner control and over temperature safety
cut-out.
Created for compact modular kitchens, it is fitted with manual (BP8080E models) or electrical
(BP8080EE) operated tilting mechanism with burner cut-out when the pan is tilted.
BP8120E / EE (120 ltr) Models.
A commercial heavy duty, electric fired Bratt Pan fitted with an 120 ltr capacity pan, of full stainless
steel pan construction, with 3 x 5.66 kW stainless steel sheathed elements clad to the pan base giving
even heat distribution. This appliance features an electric thermostat burner control and over tempera-
ture safety cut-out.
Created for compact modular kitchens, it is fitted with manual (BP8120E models) or electrical
(BP8120EE models) operated tilting mechanism with burner cut-out when the pan is tilted.
Electrical Supply Requirements
BP8080E/EE - 12kW. 400-415V ac, 50/60Hz, 3P+N+E, 12.0 kW @ 415 V.
Phase loading; L1 = 16.4 A.
L2 = 16.4 A.
L3 = 16.4 A.
BP8120-E/EE - 17kW. 400-415V ac, 50/60Hz, 3P+N+E, 17.0 kW @ 415 V.
Phase loading; L1 = 23.2 A.
L2 = 23.2 A.
L3 = 23.2 A.
Electrical Connection
When connecting a Waldorf electric appliance to the main supply, ensure that the following is carried
out:-
An isolating switch is fitted within 2 m of the appliance, but not on the appliance and in
such a position that the user does not have to reach across the cooking surface.
Supply cord shall be oil-resistant, sheathed flexible cable and not lighter than ordinary pol-
ychloroprene or other equivalent synthetic elastomer sheathed cord (as per AS / NZS 3191
part 2.10.11. or IEC 60245-IEC-57) e.g. HO5 RN-F Type.
The branch supply line shall be individually overload protected to the correct current rating
and the supply chord shall be protected against any mechanical or thermal damage.
A grommet is fitted around the wiring entry hole into the appliance.
All wiring connections must be tight.
Refer to the appropriate wiring standards for the size of cable that is to be supplied to an appliance
for the current drawn on that line.
WARNING:
THIS APPLIANCE MUST BE EARTHED.IFTHE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY ASUITABLY
QUALIFIED PERSON IN ORDER TO AVOID AHAZARD.
4
Electrical supply connection point is located at the rear of the appliance, approximately 87 mm from
the left hand side, 557 mm from the rear and 335 mm (290 mm for BP8120E/EE) from the floor.
Water Supply Requirements
Cold water connection is 1/2" tube connection via 15 mm crox fitting located 280 mm from the LH side,
575 mm from rear and 241 mm from the floor.
The water supply must be protected by an 'In-Line' sediment filter / strainer, which should be fitted into
the pipeline prior to the Bratt Pan water connection.
Maximum water supply pressure 550kPa (80psi).
Maximum water inlet temperature - 80°C.
Specifications
5
Specifications
Dimensions BP
(L)
8080E Model Only
6
Specifications
Dimensions BP
(L)
8080EE Model Only
7
Specifications
Dimensions BP
(L)
8120E Model Only
8
Specifications
Dimensions BP
(L)
8120EE Model Only
Questo manuale è adatto per i seguenti modelli
16
Indice
Altri manuali Waldorf Elettrodomestico da cucina
