WAVECONTROL SMP2 Manuale utente
Congratulations for your acquisition
of a Wavecontrol SMP2.
This Manual provides you with instructions
for using and handling your SMP2.
Please read this Manual carefully before
using your SMP2.
Product specications and descriptions in this document depend on the
rmware version and are subject to change without notice.
Disclaimer
Use of the product is controlled exclusively by the product manual (this
document) and the product warranty. Wavecontrol assumes no responsibility
or liability of any kind for errors or omissions in the contents of this
document. Although the information contained herein is correct to the best of
Wavecontrol’s knowledge, it is provided with no guarantees of completeness,
accuracy, usefulness or timeliness and without any warranties of any kind,
express or implied. Wavecontrol provides all content in this document “AS IS”
and “WITH ALL FAULTS.” No use of this document or its contents shall be
permitted without Wavecontrol’s prior consent.
® Names and Logo are registered trademarks of Wavecontrol, S.L. Trade
names are trademarks of the owners.
© Wavecontrol, S.L. 2020
User’s Manual Electromagnetic Field Meter SMP2 P. 1
Index
1. WARNINGS AND PRECAUTIONS ........................................................................... 4
2. INTRODUCTION ......................................................................................................... 6
3. FIRST STEPS .............................................................................................................. 8
4. GETTING STARTED ................................................................................................ 10
4.1. Overview ..................................................................................................... 10
4.2. Field probes ............................................................................................... 12
4.2.1. Connector type ................................................................................ 13
4.2.2. Screw connector ............................................................................. 13
4.2.3. Push-pull connector ....................................................................... 14
4.3. External connections ............................................................................... 14
4.3.1. USB .................................................................................................... 14
4.3.2. Fibre optic ......................................................................................... 15
5. SMP2 – INITIAL USE .............................................................................................. 16
5.1. Switching the apparatus on and off ..................................................... 16
5.2. Main screen ............................................................................................... 17
5.3. Menu screen .............................................................................................. 20
5.4. MEASUREMENT OPTIONS screen ....................................................... 21
5.5. MEASUREMENT LOG screen ................................................................. 25
5.6. Probe information .................................................................................... 28
5.7. GPS screen ................................................................................................ 30
5.8. SETTINGS screen ..................................................................................... 31
6. FUNCTIONS .............................................................................................................. 33
6.1. Measurement modes .............................................................................. 33
6.1.1. Time domain measurement ......................................................... 34
6.1.2. FFT mode - frequency domain measurements ........................ 37
6.1.3. Single frequency time mode ......................................................... 41
6.1.4. Spatial average ................................................................................ 42
6.2. Alarm .......................................................................................................... 43
6.3. GPS ............................................................................................................. 43
7. BATTERY INFORMATION ...................................................................................... 44
7.1. General information ................................................................................. 44
7.2. Recharging ................................................................................................ 45
User’s Manual Electromagnetic Field Meter SMP2 P. 2
8. SMP2 READER SOFTWARE ................................................................................... 46
8.1. Installation ................................................................................................. 46
8.2. System requirements .............................................................................. 48
8.3. Using the software ................................................................................... 48
8.3.1. Measurements screen ................................................................... 49
8.3.2. Screenshots screen ........................................................................ 50
8.3.3. Information screen ......................................................................... 51
8.3.4. Exporting spreadsheets ................................................................. 51
8.3.5. Control centre screen ..................................................................... 53
8.4. Live measurements ................................................................................. 54
9. SOFTWARE AND FIRMWARE UPDATES ............................................................ 56
9.1. SMP2 Reader (PC software) update .................................................... 56
9.2. SMP2 rmware update ........................................................................... 56
10. MAINTENANCE ...................................................................................................... 59
10.1. Cleaning the device and the screen ................................................... 59
10.2. Handling the device ............................................................................... 59
10.3. Regular recalibration ............................................................................. 59
11. TROUBLESHOOT ................................................................................................... 61
12. TECHNICAL SPECIFICATIONS ........................................................................... 62
APPENDIX 1. AVAILABLE PROBES .......................................................................... 64
APPENDIX 2. APPLICATIONS ................................................................................... 65
APPENDIX 3. STATIC FIELD MEASUREMENTS: WPH-DC .................................. 68
APPENDIX 4. LOW FREQUENCY ASSESSMENT ................................................... 71
APPENDIX 5. RADAR MEASUREMENTS ................................................................ 81
APPENDIX 6. E-FIELD MEASUREMENT UNDER POWER LINE .......................... 82
APPENDIX 7. COMMUNICATION PROTOCOL ....................................................... 83
APPENDIX 8. WAVECONTROL INTRANET ............................................................. 89
APPENDIX 9. ADDITIONAL SMP2 ACCESSORIES ................................................ 90
DECLARATION OF CONFORMITY (DoC) ................................................................. 91
User’s Manual Electromagnetic Field Meter SMP2 P. 3
1. WARNINGS AND PRECAUTIONS
Review this manual and become familiar with all the instructions for using
and handling your SMP2.
Your SMP2 is a portable apparatus with a rechargeable battery. Before
taking any measurement, make sure that the battery is suciently charged
for the time that you need for the measurement. If it is not, recharge the
battery before.
Your SMP2 is not watertight and it should be protected from moisture, such
as rain.
Adjustment, maintenance or repair of the equipment must be performed
only by qualied personnel. Please get in touch with Wavecontrol or your
sales contact.
Never overtighten when screwing the SMP2 on the tripod since the thread
engagement could break down.
The SMP2 is a professional measurement device that must be calibrated to
ensure that it works properly. Check to make sure that its calibration is valid at
all times.
If your equipment has been calibrated according to ISO 17025, the calibration
report is valid only for the SMP2 and probe. The probe can, however, be used
with any other SMP2. The calibration report will not be valid if you switch the
probe.
If you are unsure or need to recalibrate, please contact your distributor or
User’s Manual Electromagnetic Field Meter SMP2 P. 4
Environmental information
Disposal of your old product:
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the European
Directive 2002/96/EC.
Please get informed about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste. The correct disposal of your old
product will help prevent potential negative consequences for the environment
and human health.
User’s Manual Electromagnetic Field Meter SMP2 P. 5
The SMP2 is an instrument for measuring electromagnetic elds. Its
frequency range is determined by the eld probe used. A range of compatible
probes is available, from DC (0 Hz) to 60 GHz.
It combines three instruments in one: static eld measurements, broadband
measurements and selective measurements (FFT), including % direct EMF
exposure assessments to limit lines by using the weighted peak method (WPM).
We have developed the SMP2 to meet the needs for personal safety
assessment in connection with exposure to electromagnetic elds. Its
versatility makes it a perfect measurement tool for many different sectors and
industries such as Railway, Power, Manufacturing, Chemical, Medical, Defence,
RFID and EAS, Telecommunications, etc.
Those measurements can be made quickly and easily anywhere because the
SMP2 is portable and simple to handle and use.
2. INTRODUCTION
User’s Manual Electromagnetic Field Meter SMP2 P. 6
The SMP2 can sample the eld level continuously and store that data
automatically in its built-in memory at user-congured intervals with a
capacity of up to 1,000,000 samples.
The data stored in the memory can be easily downloaded to a computer via a
USB or bre optics port for later processing.
The SMP2 is also available with a built-in GPS receiver (optional) to allow each
measurement to be associated automatically with the geographic location
where it was taken.
There are three basic SMP2 models:
• Broadband: used with broadband probes.
• Selective: used with selective probes.
• Dual: used with all types of probes as it combines both features.
Appendix 1 shows information on all the available type of probes.
User’s Manual Electromagnetic Field Meter SMP2 P. 7
3. FIRST STEPS
This section contains instructions for unpacking and checking the equipment
when you receive it.
1. When you receive the equipment, check the packaging to see if it has been
damaged in any way. Make a description of any damage on the delivery
note before you sign it.
Compartment for
USB cable, f.o.
cable (optional),
documents, etc.
Field Probe
Figure 1: SMP2 Case
SMP2 (and battery
charger below)
Field Probe
Adjustable
shoulder strap
Field Probe
USB-f.o. converter
(optional)
USB key
User’s Manual Electromagnetic Field Meter SMP2 P. 8
Altri manuali per SMP2
3
Indice
Altri manuali WAVECONTROL Strumento di misura
