Those measurements can be made quickly and
easily anywhere because the SMP2 is portable
and simple to handle and use.
The SMP2 can sample the eld level continuously
and store that data automatically in its built-in
memory at user-congured intervals with a
capacity of up to 1,000,000 samples.
The data stored in the memory can be easily
downloaded to a computer via a USB or ber
optics port for later processing.
The SMP2 is also available with a built-in GPS
receiver (optional) to allow each measurement to
be associated automatically with the geographic
location where it was taken.
The SMP2 is an instrument for measuring
electromagnetic elds. Its frequency range is
determined by the eld probe used. A range of
compatible probes is available, from DC (0 Hz) to
40 GHz.
It combines three instruments in one: static eld
measurements, broadband measurements and
selective measurements (FFT), including % direct
EMF exposure assessments to limit lines by using
the weighted peak method (WPM).
We have developed the SMP2 to meet the needs
for personal safety assessment in connection with
exposure to electromagnetic elds. Its versatility
makes it a perfect measurement tool for many
different sectors and industries such as Railway,
Power, Manufacturing, Chemical, Medical, Defence,
RFID and EAS, Telecommunications, etc.
There are three basic SMP2 models:
• Broadband:used with broadband probes.
• Selective:used with selective probes.
• Dual:used with all types of probes as it
combines both features.
Appendix 1 shows information on all the available
type of probes.
2. INTRODUCTION
