WE-EF CFY259 LED Manuale utente

Surge Protection

For comprehensive protection of a luminaire installation against lightning and

electrical surges, it is essential to cover mains supply and data input lines at

the distribution board level, by using respective primary (Type 1) and

secondary (Type 2) surge arrestors in compliance with EN61643-11/

IEC61643-1.

Warning

Ensure that all required surge protection measures are in place and activated

prior to luminaire installation. Also, disconnect luminaires before operating

high-power devices such as, for example, electrical arc welders.

Do not open during installation

This product is factory-sealed.

Refer to the instructions contained in this

document for details.

Installation tools

Mounting hardware used on this product

includes fasteners with hexalobular socket

heads (ISO 10664). Installation requires the

use of matching tools.

Bollard

WE-EF LIGHTING

Installation and Maintenance

Instructions

CFY259

LED

ZFY23

-AP LED

KTY234-AP LED

INSTALLER

HOTLINE

+61 458 933 399

7am – 7pm AEST

Bollard

ZFY230-AP

H = 600 mm ZFY230-AP

H = 1000 mm

300-0461 3.2

ESV4

1000

ø 180

600

ø 180

H kg

600 7.8

IP66, Class I, ta = 25°C

Weight

for

ZFY230-AP

for

ZFY230-AP

Accessories:

Planted root

– Galvanised steel.

ESV4

for ZFY230-AP

1000 8.9

ESV4

Weight kgH

for KTY234-AP 600 6.8

for KTY234-AP 1000 8.9

Accessories:

Planted root

– Galvanised steel.

ESV4

for KTY234-AP 300-0461 3.2

IP66, Class I, ta = 25°C

Bollard

KTY234-AP

H = 600 mm

KTY234-AP

H = 1000 mm

685

ø 240

1085

65°

ø 190 ø 240

ESV4

Weight kgH

for CFY259 600 15

for CFY259 1000 18

Accessories:

Planted root – Galvanised steel.

ESV4 for CFY259 300-04644.4

IP66, Class I, ta = 25°C

Bollard

CFY259

H = 600 mm

CFY259

H = 1000 mm

CFY259

H600 / 6 LED

CFY259

H1000 / 2x6 LED

WARNING : HEAVY ITEMS

Ensure correct handling

techniques are used

Light Source

LED

Maintenance

Apart from cleaning the product’s exterior surfaces, no special maintenance work is required.

Do not use high-pressure cleaners.

To remove the head of the luminaire during maintenance, loosen screw

with a Torx T-20 tool and

rotate anti-clockwise until it can be lifted up.

If the head of the luminaire is returned after maintenance, align it to the bollard post as shown below

and secure by tightening screw

In case of component failure due to abnormal circumstances or at end of life, replacement must be carried out

E\DVXLWDEO\TXDOLƂHGDQGWUDLQHGSURIHVVLRQDO

Warning:

Do not open the luminaire or remove the bollard head while mains supply is switched on.

The luminaire head unit Bis factory sealed, warranty will be void if opened without authorisation from WE-EF

Lighting or nominated agent.

Installation

The product must be installed and maintained by a

VXLWDEO\TXDOLƂHGSURIHVVLRQDOLQFRPSOLDQFHZLWKODWHVW

building/construction and/or electrical regulations and

relevant legislation.

Warning: Switch off and isolate the mains electrical

supply prior to installing and connecting the luminaire.

Notice:,IWKHOXPLQDLUHLVPRGLƂHGE\DQ\ERG\RWKHU

than the original manufacturer, then the warranty will

no longer be valid and shall become the full respon-

sibility of the modifying person/organisation. Claims

based on defects attributable to improper installation

and/or application, and the consequences thereof, are

excluded.

Installation Procedure

The luminaire is suitable for installation directly on

to an even surface, however it is recommended to

incorporate the optional planted root to ensure

maximum stability.

Switch off

and isolate the

mains electrical supply.

Checkthatrating

shownon luminaire

label

conforms

with mains electrical supply.

A suitable recess to be provided for planted root

(QVXUHWKDWDVROLGIRXQGDWLRQDVZHOODVVXIƂFLHQW

mains cable length are provided.

Remove head of luminaire

from bollard post

after loosening screw

with Torx T-20 tool and

rotating it anti-clockwise until it can be lifted up.

Set cast base

in position and secure by inserting

and tightening bolts

and the post

is attached to

the base with retention bolts

As per Fig. 2

Connect luminaire cable

to mains

supply

terminal block located on the gear tray

the

underside of the head

and is secured by the

clamp

Wiring

is as follows and should match the

labels on the

terminal block:

ON/OFF

(L = Phase, N = Neutral, = Earthing)

1-10V/DALI

(L = Phase, N = Neutral,

= Earthing, DA/DA = DALI control line,

D-/D+ = 1-10V control line).

Return head of luminaire

to bollard post

and

secure by tightening screw

Torque:

Screw Torque

M4 max. 2.0 Nm

M5 max. 4.0 Nm

M6 max. 6.0 Nm

M8 max. 15.0 Nm

M16 max.100.0 Nm

Fig. 1

Fig. 2

TO9235W0218 © WE-EF 2018

7HFKQLFDOVSHFLƂFDWLRQVDUH

subject to change.

www.we-ef.com

WE-EF LEUCHTEN

Germany

Tel +49 5194 909 0

Fax +49 5194 909 299

info.germany@we-ef.com

WE-EF LUMIERE

France

Tel +33 4 74 99 14 44

Fax +33 4 74 99 14 40

info.france@we-ef.com

WE-EF HELVETICA

Switzerland

Tel +41 22 752 49 94

Fax +41 22 752 49 74

info.switzerland@we-ef.com

WE-EF LIGHTING

United Kingdom

Tel +44 844 880 5346

Fax +44 844 880 5347

info.uk@we-ef.com

WE-EF LIGHTING

Thailand

Tel +66 2 738 9610

Fax +66 2 175 2174

LQIRDVLDSDFLƂF#ZHHIFRP

WE-EF LIGHTING

Australia

Tel +61 3 8587 0444

Fax +61 3 8587 0499

info.australia@we-ef.com

WE-EF LIGHTING

United States of America

Tel +1 724 742 0030

Fax +1 724 742 0035

info.usa@we-ef.com

INSTALLER

HOTLINE

+61 458 933 399

7am – 7pm AEST

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali WE-EF Luce esterna

WE-EF

WE-EF PFL540 LED Manuale utente

WE-EF

WE-EF PIA230 LED Manuale utente

WE-EF

WE-EF ASP530 LED Manuale utente

WE-EF

WE-EF KTY234 LED Manuale utente

WE-EF

WE-EF PFL540 Manuale utente

WE-EF

WE-EF PLS400 Series Manuale utente

WE-EF

WE-EF ETC109 LED Manuale utente

WE-EF

WE-EF VLR110 LED Manuale utente

WE-EF

WE-EF ALP500 LED Series Manuale utente

WE-EF

WE-EF ETC320-GB LED Manuale utente

WE-EF

WE-EF PSY424 LED Manuale utente

WE-EF

WE-EF QRI354 LED Manuale utente

WE-EF

WE-EF ETC320-GB LED Manuale utente

WE-EF

WE-EF FLA441 Specifiche tecniche

WE-EF

WE-EF PFL230 Manuale utente

WE-EF

WE-EF LTM440-FT Manuale utente

WE-EF

WE-EF KTY234 Manuale utente

WE-EF

WE-EF ESC130-FS Manuale utente

WE-EF

WE-EF EFL540 LED Manuale utente

WE-EF

WE-EF XRY324 LED Manuale utente

WE-EF

WE-EF PFL540 LED Manuale utente

WE-EF

WE-EF VFL500-SE Series Manuale utente

WE-EF

WE-EF ESC100 LED Series Manuale utente

WE-EF

WE-EF VFL530 Manuale utente

Manuali Luce esterna popolari di altre marche

Sealey

Sealey LED37 Manuale utente

nordlux

nordlux VEJERS Guida utente

SImx

SImx ELITE LED LHTC637 Manuale utente

GEV

GEV CAROLINE 10833 Manuale utente

NEBO

NEBO NEB-LSP-0020 Manuale utente

Lindby

Lindby 9949029 Manuale utente

HEPER

HEPER DOGO Side LW6048.585-US Istruzioni per l'installazione e il funzionamento

HEPER

HEPER LW8034.003-US Istruzioni per l'installazione e il funzionamento

Maretti

Maretti VIBE S 14.6080.04.A Manuale utente

BEGA

BEGA 84 253 Manuale

HEPER

HEPER MINIMO Istruzioni per l'installazione e il funzionamento

LIGMAN

LIGMAN BAMBOO 3 Manuale utente

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuale utente

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuale utente

urban ambiance

urban ambiance UQL1273 Manuale utente

TotalPond

TotalPond 52238 Manuale utente

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuale utente

LIGMAN

LIGMAN DE-20023 Manuale utente