Revision: B
Date: 9/8/2009
Page: 6 of 23
Constant Pressure Crude Oil Container (CPCCP)
Installation, Operations, and Maintenance Manual
Document: IOM-016 Last Updated:9/8/2009
1 General
1.1 Introduction
We appreciate your business and your choice of Welker products. The installation,
operations, and maintenance liability for this product becomes that of the purchaser at the
time of receipt. Reading the applicable Installation, Operations, and Maintenance (IOM)
Manual prior to installation and operation of this equipment is required for a full
understanding of its application and performance prior to use. If you have any questions,
please call 1-800-776-7267 in the USA or (1) 281-491-2331.
The following procedures have been written for use with standard Welker parts and
equipment. Assemblies that have been modified may have additional requirements and
specifications that are not listed in this manual. After unpacking the unit, check it for
compliance or for any damage that may have occurred during shipment.
Claims for damages caused during shipment must be initiated by the receiver and
directed to the carrier. Welker is not responsible for any damages caused from
mishandling by the shipping company.
The Welker®Constant Pressure Crude Oil Container (CPCCP) is designed to allow the
contents of the cylinder to thoroughly mix, while keeping the contents under line
pressure. This process ensures a stabilized oil-water mixture for analysis.
When sealing fittings with PTFE tape, refer to the proper sealing instructions for the tape used.
