Yamaha CS6R Manuale utente

1
Contents
Introduction..................................................2
Starting Up ..................................................3
Menu Bar ......................................................3
The Library Window ....................................6
The Toolbar ......................................................8
The Edit Window........................................14
The Toolbar ....................................................14
Voice Edit Window..........................................15
OMS Settings (Macintosh) ................................27
An Example of Voice Editor in Use ..................29
Troubleshooting ........................................30
• Click on the red-colored text to jump to the related item in this manual. 
• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.
• Copying of the software or reproduction of this manual in whole or in part by any means is expressly
forbidden without the written consent of the manufacturer.
• Yamaha makes no representations or warranties with regard to the use of the software and
documentation and cannot be held responsible for the results of the use of this manual and the
software.
• Copying of the commercially available music sequence data and/or digital audio files is strictly
prohibited except for your personal use.
• The company names and product names in this Owner’s Manual are the trademarks or registered
trademarks of their respective companies.
• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may
appear somewhat different from the screens which appear on your computer.
This owner’s manual is applicable to both the CS6x/CS6R Voice Editor and the S80/S30 Voice Editor (for both
Windows and Macintosh).
The screen illustrations are mainly taken from the CS6x/CS6R Voice Editor for Windows, although and
differences between versions are explained.
This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operation. If you
are not,please refer to the owner’s manual which came with your Windows/Mac OS software before using
Voice Editor.
For information about hardware requirements, the interconnection of devices and the installation of the Voice
Editor software, refer to the separate “Installation Guide” as well as the Owner’s Manual for the respective
MIDI device.
© 2000 Yamaha Corporation. All rights reserved.

Introduction

With CS6x/CS6R Voice Editor and S80/S30 Voice Editor (hereafter referred to as Voice Editor),

you can edit your CS6x/CS6R/S80/S30 synthesizer’s voices and effects via your computer. Its

graphical user interface provides for easy editing by presenting each synthesizer parameter on

screen as a knob, slider, switch, and so on, which can be manipulated using your computer’s

mouse or keyboard. Finally, all the changes you have made to your voices can be saved to

your computer. If you have saved your edits to a Memory Card (SmartMedia) in the computer,

you can insert the memory card into your CS6x/CS6R/S80/S30 synthesizer and its contents can

be read directly.

nVoice Editor for Windows is a plug-in for XGworks(lite). To use Voice Editor for Windows, XGworks(lite)

must be installed beforehand.

MUSICSYNTHESIZER

RealtimeControl

ExtendedPlug-in System

POWERCARDmLANMIDIHOSTSELECTTOHOSTBREATH

FOOT

SWITCH

FOOT

CONTROLLER

FOOT

VOLUME OUTIN THRU

SUSTAINPHONES INDIVIDUALOUTPUT

OUTPUT

MONO R

DINPUT

GAIN

DOWN UP

LINE1MIC

LINE2

CUTOFF RESONANCE

ATTACK

DECAY SUSTAIN

CONTROL PAN

RELEASE

REVERB CHORUS

VELRATE

OFF

PLAY

STOP

REC

OFF

HOLD

PITCH

VOICE PERFORM

SHIFT PAGE PART

ELEMENT

DEC

NO INC

YES

EXIT ENTER

BYPASS

MASTER

KEYBOARD

MEMORY

BANK

PROGRAM

PART

PRE1 A B C D E F G H

12341234

12345678

GENERAL

ELEMENTSELECT ELEMENTON

OFF

QED ARPEGGIO CONTROL COMLFO EFFECT

910111213141516

OSC PITCH FILTER AMPLITUDE LFO EQ PLG

INT

DRUM

EXT

PLG1 PLG2

PRE2

DATA

UTILITY CARD

EDIT

COMPARE

JOB

STORE

MODE

TEMPO

FILTER EFFECT

SCENE MIXER

PORTAMENTO PHRASECLIP

SEQPLAY

ARPEGGIO

OCTAVE

VOLUME

SYSTEM A B C 1 2 DRUM

Library Window Save the Library file

Import a voice

Library file

EditWindow

Voice

Element

dialog Set the effects parameters

Transmit / Receive bulk data

CS6x/CS6R/S80/S30

Starting Up

Windows 95/98

If you have a CS6x or CS6R, you can start Voice Editor by starting XGworks and choosing

“CS6x/CS6R VoiceEditor” from the “Plug-in” menu. If you have an S80 or S30, choose

“S80/S30 VoiceEditor” instead.

Macintosh

nIf you are using Voice Editor on a Macintosh computer, open the “Chooser” from the Apple menu and

turn off “Apple Talk.”

If you have a CS6x or CS6R, open the “CS6x/CS6R Voice Editor” folder in the “YAMAHA Voice

Editor” folder and double-click the “CS6x/CS6R Voice Editor” icon.

If you have an S80 or S30, open the “S80/S30 Voice Editor” folder in the “YAMAHA Voice

Editor” folder and double-click the “S80/S30 Voice Editor” icon.

Menu Bar

The Menu Bar holds various editing and setup functions/commands in its menus. Click each of

the menu names to open their pull-down menu, and choose the function/command you wish to

apply. Those functions/commands which are unavailable are grayed out.

nThe most commonly-used menus in the Menu Bar are available as buttons in Voice Editor's toolbar.

nTo use Voice Editor for Windows, refer to the documentation that came with XGworks(lite).

File

CS6x/CS6R(S80/S30)Voice Editor New (New)

Creates and opens a new Library file.

CS6x/CS6R(S80/S30)Voice Editor Open Library (Open)

This is the same as the “Open” button in the Toolbar (Page 8).

Windows Macintosh

CS6x/CS6R(S80/S30)Voice Editor Save Library (Save)

This is the same as the “Save” button in the Toolbar (Page 9).

CS6x/CS6R(S80/S30)Voice Editor Save Library As (Save As)

Lets you save the Library file under a new or different name.

Close (Macintosh only)

Close the window. This is the same as the “Close” box in the Title Bar.

Edit

Copy

Copies the selected voice to the clipboard. If nothing is selected, this item is grayed out.

Paste

Copies the voice from the clipboard to Voice Editor.

CS6x/CS6R(S80/S30)Voice Editor Edit (Edit)

This is the same as the “Edit Window” button in the toolbar (Page 12).

CS6x/CS6R(S80/S30)Voice Editor Library (Library)

This is the same as the “Library Window” button in the toolbar (Page 14).

CS6x/CS6R(S80/S30)Voice Editor Store (Store)

This is the same as the “Store” button in the toolbar (Page 14).

CS6x/CS6R(S80/S30)Voice Editor Import (Import)

This is the same as the “Import” button in the toolbar (Page 13).

CS6x/CS6R(S80/S30)Voice Editor Compare (Compare)

This is the same as the “Compare” button in the toolbar (Page 15).

Windows Macintosh

Setup (Windows) / MIDI (Macintosh)

CS6x/CS6R(S80/S30)Voice Editor Setup (Editor Setup)

This is the same as the “Editor Setup” button in the toolbar (Page 10).

CS6x/CS6R(S80/S30)Voice Editor Transmit Bulk (Transmit)

This is the same as the “Transmit Bulk” button in the toolbar (Page 11).

CS6x/CS6R(S80/S30)Voice Editor Receive Bulk (Receive)

This is the same as the “Receive Bulk” button in the toolbar (Page 12).

CS6x/CS6R(S80/S30)Voice Editor Monitor (Monitor)

This is the same as the “Monitor” button in the toolbar (Page 12).

OMS Port Setup (Macintosh only)

Opens the OMS Port Setup window for Voice Editor. Refer to the section “OMS Port Setup”

(Page 28) for further details.

OMS MIDI Setup (Macintosh only)

Opens the OMS MIDI Setup window. Refer to the documentation that came with OMS for

further details.

OMS Studio Setup (Macintosh only)

Opens the OMS Studio Setup window. Refer to the documentation that came with OMS for

further details.

Windows Macintosh

The Library Window

When you start Voice Editor, you will first see the Library Window consisting of tabs, each

representing a Memory in your CS6x/CS6R/S80/S30 synthesizer. Each tab lists all the names,

numbers and categories of voices in the selected Memory. When you choose to edit a voice

from the Library Window by double-clicking it, the Edit Window for that voice will be opened.

nYou can save your settings as a Library file (*.S2V).

1Toolbar

This area holds the buttons controlling Voice Editor (Page 8).

2Tabs

Click any of these to view the voice list for that Memory.

3Voice list

This area shows all the voices in the selected Memory as a scrollable list. The name,

number and Category of each voice are shown. You can rearrange the voices by

dragging-and-dropping their voice numbers to a new location. You can rename a voice in

Windows by selecting the voice name, then clicking on it again to enter a new name. On

the Macintosh, you click on the voice name while holding down [Control], choose “Edit

Voice Name” from the pull-down menu and enter the new name in the dialog.

nTo select a continuous block of voices, click the number of the first voice, hold down the [Shift] key,

then click the last number.

nVoice names can consist of up to 10 characters.

Viewing Just the Voice Names (Windows)

You can view just the names of all voices in the Memory without their “Number” and

“Category” information. To do this, right-click on any part of the voice list and choose “List.”

This may be useful when choosing voices quickly, since you will have less scrolling to do.

nTo switch back to the full Voice Name/Number/Category list, right-click on any part of the voice list

and choose “Details.”

The Toolbar

1“Open” button

Click this to open the “Open File” dialog and select a Library file to open.

“Open File” Dialog

nIf you are using a Macintosh, the typical Macintosh “Open” dialog will appear.

1“Look in:”....................................Click this and choose the folder containing the Voice Editor files.

2List box ......................................Shows the contents of the current folder .

3[Open] button..............................Click this to open the file selected from the List.

4[Cancel] button ..........................Click this to cancel the operation.

5“File name:”................................Shows the name of the files selected from the List.

6“Files of type:” ............................Click this and choose the file type.

12 345678

2“Save” button

Click this to save the existing Library file with your new settings. If you are working on a

new file, this button will open the “Save As” dialog, where you can name and save your

settings as a new Library file (*.S2V).

“Save As…” Dialog

nLibrary file names can consist of up to 8 characters plus a 3-character extension.

nIf you are using a Macintosh, the typical Macintosh “Save As” dialog will appear.

1“Save in:”....................................Click this and choose the folder in which to save the Library file.

2List box ......................................Shows the contents of the folder you wish to save to.

3[Save] button ..............................Click this to save the Library file with the name specified in the “File

name:” .

4“File name:”................................Specify the name of the Library file to be saved here.

5“Files of type:”............................Click this and choose the file type.

3“Editor Setup” button

Click this to open the “Editor Setup” dialog and specify the MIDI Out port settings.

“Editor Setup” Dialog

This is where you set up the Voice Editor to allow the transmission of voice data to your

CS6x/CS6R/S80/S30 synthesizer. Click the [OK] button to apply the settings and quit the

dialog. Click the [Cancel] button to quit without applying the settings.

1“MIDI Out Port:” ..........................Click this and choose the MIDI Out port. You can use the Voice Editor to

control and edit the device connected to this port. Select the port which

has been assigned to your CS6x/CS6R/S80/S30 synthesizer within

XGworks(lite).

nIf you are using a Macintosh, the MIDI Out Port setting is assigned in the OMS Port Setup. For

further details, see section “OMS Settings.” (Page 27)

2“MIDI Ch:” ..................................Click this and choose the MIDI Out channel. This is used when

monitoring sounds using the on-screen keyboard in the Edit Windows.

nSlider and knob values are sent by MIDI System Exclusive, independently of the MIDI Out channel.

3“Device No.:” ..............................Click this and choose the MIDI device number of your

CS6x/CS6R/S80/S30 synthesizer.

4“Dump Interval:”..........................Click this and choose the interval between successive MIDI dumps.

nIf you set too short an interval, you may encounter errors when transmitting MIDI data.

Altri manuali per CS6R

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Yamaha Software

Yamaha

Yamaha VL Visual Editor Manuale utente

Yamaha

Yamaha Add-On Effects Manuale utente

Yamaha

Yamaha VE Manuale utente

Yamaha

Yamaha CVP-403PE Manuale utente

Yamaha

Yamaha QY70 Manuale utente

Yamaha

Yamaha DME32 V1.1 Guida alla configurazione

Yamaha

Yamaha Clavinova CVP-309 Manuale utente

Yamaha

Yamaha LS9-16 Manuale utente

Yamaha

Yamaha Studio Manager v.2 Manuale utente

Yamaha

Yamaha Add-On Effects Manuale utente

Yamaha

Yamaha DM 2000 Version 2 Manuale utente

Yamaha

Yamaha File Utility Manuale utente

Yamaha

Yamaha Clavinova CVP-210 Manuale utente

Yamaha

Yamaha DME Designer Manuale utente

Yamaha

Yamaha PM5D Manuale utente

Yamaha

Yamaha MOTIF RACK Music System Manuale utente

Yamaha

Yamaha LS9-16 Manuale utente

Yamaha

Yamaha Loopfactory DX200 Manuale utente

Yamaha

Yamaha IMX644 Manager Manuale utente

Yamaha

Yamaha S08 Voice Editor Manuale utente

Yamaha

Yamaha CL3 Manuale utente

Yamaha

Yamaha S03 voice editor Manuale utente

Yamaha

Yamaha mLAN Driver Manuale utente

Yamaha

Yamaha M7CL StageMix V1.5 Manuale utente

Manuali Software popolari di altre marche

COMPRO

COMPRO COMPROFM Manuale utente

Muratec

Muratec OFFICEBRIDGE ONLINE Manuale utente

Oracle

Oracle Contact Center Anywhere 8.1 Manuale utente

Adobe

Adobe 65007312 - Photoshop Lightroom Manuale

Avaya

Avaya NULL One-X for RIM Blackberry Manuale utente

HP ProLiant BL420c Manuale utente

PS Audio

PS Audio PowerPlay Manuale del proprietario

Brady

Brady LOCKOUT PRO 3.0 Manuale di servizio

Avaya

Avaya Interaction Center Manuale utente

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuale

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuale utente

Oracle

Oracle Application 9i Manuale utente

Acer

Acer RDM Manuale utente

Canon

Canon Vixia HF21 Manuale utente

Canon

Canon ZR950 Manuale utente

Samsung

Samsung Auto Backup Manuale utente

Polycom

Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuale utente