Yamaha RS7000 Ver.1.2 Istruzioni per l'installazione e il funzionamento
RS7000 1
Several new features have been added in this RS7000 firmware update. This document lists the appropriate
changes and additions to the owner’s manual supplied with the RS7000.
■
Switching to the Edit
(Owner’s Manual pages 154 & 225)
,Step Record
(Owner’s Manual pages 80 & 187)
,
and Grid Step Record
(Owner’s Manual pages 83 & 189)
modes during playback.
It is now possible to switch directly to the Edit (Phrase Edit, Song Edit), Step Record (Phrase Record, Song Record), and Grid Step
Record (Phrase Record, Song Record) modes during playback: simply press the [EDIT] button to enter the Edit mode, or the [REC]
button to enter the Step record or Grid Step Record mode. Press [PLAY] to return to the normal playback mode.
■
Keyboard Pad LED Note Display
When the keyboard pads are being used as a music keyboard (Owner's Manual page 18 - [KEYBOARD] Button), the LEDs of the
keyboard pads corresponding to the notes listed below will light.
• The note at the cursor location on the STEP RECORD display.
• The note at the cursor location on the EDIT display.
• The note currently playing in the currently selected track.
■
Switching Sections via the Keyboard Pads
(Owner’s Manual page 72)
In addition to sections A ~ J, it is now possible to select sections K ~ P via the keyboard pads. To select sections K ~ P use the black
keyboard pads (A ~ F) while holding the [SHIFT] button.
■
Real-time Record
(Owner’s Manual pages 80, 162, & 187)
It is now possible to temporarily disengage the record mode while playback continues so you can try out ideas on the keyboard pads
without actually recording.
To temporarily disengage the record mode simply press the [REC] button after starting REPLACE, OVERDUB, or PUNCH real-
time recording as described in the owner’s manual – the [REC] LED will flash and playback will continue uninterrupted but no data
will be recorded. To return to the record mode press the [REC] button again – the [REC] LED will light continuously. This can be
repeated to disengage/resume recording as many times as necessary to until the [STOP] button is pressed. The [REC] LED indicates
the current record status – continuously lit = recording, flashing = record disengaged.
■
Grid Step Record
(Owner’s Manual pages 83 & 189)
Changes and additions to the Grid Step Record mode are listed below.
●
Track selection
Press the appropriate white keyboard pad while holding the [TRACK SELECT] button.
●
Move to a different measure during playback.
Use the and buttons.
●
Play other selected tracks while recording.
All other tracks will play back simultaneously. Use the [MUTE] button and the white keyboard pads to selectively
mute/un-mute tracks as required. Press [SHIFT] and [MUTE] simultaneously to monitor only the record track.
●
Note Scan
This function provides a convenient way to locate a specific instrument in a recorded rhythm track. Press [F1] to
move to the nearest recorded note that is higher than the current note.
New Functions in RS7000 Version 1.2
2 RS7000
●
Set grid resolution.
It is now possible to specify the grid resolution.
4
RESOLUTION .......................................................... [DIAL 4]
[Settings] Range: 15 (128
th
-notes), 20 (64
th
-note triplets), 30 (64
th
notes), 40 (32
nd
-note triplets), 60 (32
nd
notes),
80 (16
th
-note triplets), 120 (16
th
notes), 160 (8
th
-note triplets).
When the number of grid units per measure is greater than 16 the keyboard pad edit location with the measure is set via the [OCT DOWN]
and [OCT UP] buttons. The keyboard pad LEDS indicate the current edit location while the [OCT DOWN] or [OCT UP] button is held.
When a triplet resolution is selected only keyboard pads 1 ~ 12 are used.
In this example the fourth of a possible eight locations is selected for editing.
●
Measure Hold
The Measure Hold can now be selected from the Grid Step record standby mode (Owner’s Manual page 78).
7
MEASURE HOLD .................................................... [DIAL 3]
Can be set when the Grid Step record type is selected.
[Settings] Range: ON, OFF
1-measure monitoring is selected when ON, full-pattern monitoring when OFF.
■
Changes to the Voice Edit Filter Page
(Owner’s Manual page 102)
12 new Voice Edit filter types are provided in addition to a new “Distance” parameter.
1
CUTOFF FREQUENCY (CUTOFF) (Refer to Owner’s Manual page 103)
2
DISTANCE (DST) ..................................................... [F1]
→
[DIAL 1]
Relative
[Settings] Range: –32 ~ +31
Specifies the distance between the two frequencies for the dual-type filters (Dual LPF, Dual HPF, Dual BPF, Dual BEF) and LPF+BPF com-
bined filter. When set to “0” the two cutoff frequencies are equal.
TRACK
123456789
CAPS
SOLO
K ! L # M $ N % O & P ' Q ( R ) S -
MUTE
KEY-
BOARD ARPEGGIO
ON
R
ANSPOSE
ALL TR- TR+1~8 9~16
TRANSPOSE(-) TRANS
P
STORE
MUTE
SCENE 123
S
ECTION
ABC DE
OCT
DOWN OCT
UP MEMOR
Y
NK
RS7000 3
3
RESONANCE (Refer to Owner’s Manual page 103)
4
FILTER TYPE ........................................................... [DIAL 3]
Absolute
[Settings] Range: BYPASS, LPF24D, LPF18, LPF12, HPF24D, BPF12D, BEF12, LPF24A, LPF18s, LPF6, HPF12, BPFw,
BPF6, BEF6, Dual LPF, Dual HPF, Dual BPF, Dual BEF, LPF+BPF
Filter Characteristics
LPF24D, LPF18, LPF12, LPF24A, LPF18S, LPF6 HPF24D
NOTE
Please note that data created using the new filter types added in this firmware update will not work properly on previous
versions.
Filter Name Old Name Characteristics
BYBASS BYPASS Direct throughput with no filter effect.
LPF24D (24dB/oct Digital Low Pass Filter) LPF24 A dynamic 24dB/oct low-pass filter with the characteristic digital
sound. Compared to the LPF24A type this filter can produce a
more pronounced resonance effect.
LPF18 (18dB/oct Low Pass Filter) LPF18 3-pole 18dB/oct low-pass filter.
LPF12 (12dB/oct Low Pass Filter) LPF12 12dB/oct low-pass filter. This filter is designed to be used in con-
junction with a high-pass filter.
HPF24D (24dB/oct Digital High Pass Filter) HPF24 A dynamic 24dB/oct high-pass filter with the characteristic digital
sound. This filter can produce a pronounced resonance effect.
BPF12D (12dB/oct Digital Band Pass Filter) BPF 12dB/oct band-pass filter.
BEF12 (12dB/oct Band Elimination Filter) BEF 12dB/oct band-elimination filter.
LPF24A (24dB/oct Analog Low Pass Filter) (New) A digital dynamic low-pass filter with characteristics similar to 4-
pole analog synth filter.
LPF18s (18dB/oct Staggered Low Pass Filter) (New) 3-pole 18dB/oct low-pass filter. This filter has a smoother cutoff
slope than the LPF18 type.
LPF6 (6dB/oct low-pass Filter) (New) 1-pole 6dB/oct low-pass filter. No resonance. This filter is
designed to be used in conjunction with a high-pass filter.
HPF12 (12dB/oct High Pass Filter) (New) 12dB/oct dynamic high-pass filter.
BPFw (Wide Band Pass Filter) (New) A 12dB/oct BPF that combines HPF and LPF filters to allow wider
bandwidth settings.
BPF6 (6dB/oct Band Pass Filter) (New) 6dB/oct band-pass filter.
BEF6 (6dB/oct Band Elimination Filter) (New) 6dB/oct band-elimination filter.
Dual LPF (Dual Low Pass Filter) (New) Two 12dB/oct low-pass filters connected in parallel.
Dual HPF (Dual High Pass Filter) (New) Two 12dB/oct high-pass filters connected in parallel.
Dual BPF (Dual Band Pass Filter) (New) Two 6dB/oct band-pass filters connected in parallel.
Dual BEF (Dual Band Elimination Filter) (New) Two 6dB/oct band-elimination filters connected in serial.
LPF+BPF (Low Pass Filter + Band Pass Filter) (New) A combined low-pass and high-pass filter.
Level
Frequency
RESONANCE
Range passed
CUTOFF (Cutoff frequency)
Level
Frequency
Range passed
CUTOFF (Cutoff frequency)
RESONANCE
BPF12D, BPF12, BPFw, BPF6
Dual LPF
Dual BPF
LPF+BPF
BEF12, BEF6
Dual HPF
Dual BEF
5
FILTER ENVELOPE DEPTH (ENV.DEPTH) (Refer to Owner’s Manual page 103)
■
MIDI Data Format Addition
(Owner’s Manual pages 325 & 330)
●
“DISTANCE”Parameter Addition
• Tone generator block (Voice part) (3-1-5) CONTROL CHANGE (Owner’s Manual page 325)
C=79 DISTANCE ;v = 32:–32 - 64:0 - 95:+31
• <Table 1-4> Midi Parameter Change Table (MULTI PART) MULTI PART GROUP 1 (Owner’s Manual page 330)
pp: Part Number (00H-0FH)
Level
Frequency
CUTOFF (Cutoff frequency)
Range passed
RESONANCE
Level
Frequency
CUTOFF (Cutoff frequency)
DST
(Distance)
Level
Frequency
CUTOFF (Cutoff frequency)
DST
(Distance)
Level
Frequency
DST (Distance)
CUTOFF
(
Cutoff fre
q
uenc
y)
Level
CUTOFF (Cutoff frequency)
Cutoff range
Frequency
RESONANCE
Level
Frequency
CUTOFF (Cutoff frequency)
DST
(Distance)
Level
Frequency
DST (Distance)
CUTOFF (Cutoff frequency)
Address Size Data
(H)
Parameter Description Default
Value (H)
HML
10 pp 00 1 20 - 5F DISTANCE –32 - +31 40
M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2002 Yamaha Corporation
211CRCP 01A0 Printed in Japan
Yamaha Manual Library
http://www2.yamaha.co.jp/manual/english/
This document is printed on recycled chlorine free (ECF) paper with soy ink.
Altri manuali per RS7000 Ver.1.2
3
Questo manuale è adatto per i seguenti modelli
1
Altri manuali Yamaha Software
Yamaha
Yamaha 02R96 Version 2 Manuale
Yamaha
Yamaha 02R96 Version 2 Manuale utente
Yamaha
Yamaha DME32 V1.1 Guida alla configurazione
Yamaha
Yamaha LS9-16 Manuale utente
Yamaha
Yamaha DSP5D Editor Manuale utente
Yamaha
Yamaha MOTIF-RACK ES Manuale utente
Yamaha
Yamaha mLAN mLAN Driver Manuale utente
Yamaha
Yamaha CL3 Manuale utente
Yamaha
Yamaha MOTIF RACK Music System Manuale utente
Yamaha
Yamaha PM5D Manuale utente
Yamaha
Yamaha LS9 Editor Manuale utente
Yamaha
Yamaha mLAN Driver Manuale utente
Yamaha
Yamaha Add-On Effects Manuale utente
Yamaha
Yamaha ASIO DirectKS Manuale utente
Yamaha
Yamaha DSP5D Editor Manuale utente
Yamaha
Yamaha DME Designer Manuale utente
Yamaha
Yamaha Card Filer Manuale utente
Yamaha
Yamaha TOOLS for MY16-mLAN Manuale utente
Yamaha
Yamaha Synth Manuale utente
Yamaha
Yamaha QY70 Manuale utente
Manuali Software popolari di altre marche
PS Audio
PS Audio PowerPlay Manuale del proprietario
Brady
Brady LOCKOUT PRO 3.0 Manuale di servizio
Avaya
Avaya Interaction Center Manuale utente
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuale
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuale utente
Oracle
Oracle Application 9i Manuale utente
Acer
Acer RDM Manuale utente
Canon
Canon Vixia HF21 Manuale utente
Canon
Canon ZR950 Manuale utente
Samsung
Samsung Auto Backup Manuale utente
Polycom
Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuale utente