ADA INSTRUMENTS Cosmo 70 Manuale utente
Operating manual
Laser distance meter
Model: COSMO 70
COSMO 70
2
Table of contents
1. Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2. Start up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Menu functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6. Message codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7. Techical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
8. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9. Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Appendix 1 - “Certificate of acceptance and sale”
Appendix 2 - “Warranty card”
COSMO 70 3
Congratulations on the purchase of laser distance meter ADA COSMO 70!
Permitted use
· Measuring distances
· Computing functions, e.g. areas, volumes, subtractions, Pythagorean calculation
· Storing measurements
The safety regulations and instructions along with the operating manual should be read carefully
before initial operation.The person responsible for the instrument must ensure that equipment is
used in accordance with the instructions. This person is also accountable for the deployment of
personnel and for their training and for the safety of the equipment when in use.
COSMO 70
4
SAFETY INSTRUCTION
Prohibited use
Please follow up instructions given in operating manual.
Do not use instrument in explosive environment (filling station, gas equipment, chemical production and so on).
Do not remove warning labels or safety instructions.
Do not open instrument housing, do not change it’s construction or modification.
Do not stare at beam. Laser beam can lead to eye injury (even from greater distances).
Do not aim laser beam at persons or animals.
Opening of the equipment by using tools (screwdrivers, etc.), as far as not specifically permitted for certain cases.
Inadequate safety precautions at the surveying site (e.g. when measuring on the roads, construction sites and so on).
Use the instrument in the places where it could be dangerous: on the air transport, near manufacturers,
production facilities, in the places where the work of laser distance meter can lead to the harmful effects on
people or animals.
COSMO 70 5
START UP
Keypad
1. ON / Measure
2. Area / Volume / Pythagorean measure
3. Subtraction / Timer
4. Clear / OFF
5. Addition / Units
6. Reference
1
2
3
4
5
6
COSMO 70
6
Display
1. Laser ON
2. Reference (front/rear)
3. Area / volume/ Pythagorean
4. Main line
5. Line 2
6. Line 1
7. Units
8. Timer On
9. Battery display
10. Error
1
2
3
10
6
5
4
9 8
7
COSMO 70 7
Inserting / Replacing Batteries
Remove the end piece on 180º. Remove the battery cover, insert the battery correctly. Pay attention to
correct polarity.
Close the battery compartment.
Replace the battery when symbol constantly blinks in the display.
Batteries should be removed in case of danger of corrosion, if the device will not be used for a long time.
MENU FUNCTIONS
Swtich on and off
Press the button (1) to switch on the instrument and laser.
Press and hold key for about 2 seconds to start continuous measuring.
The device also switches off automatically after 3 minutes of inactivity i.e. no key is pressed within that
interval. To switch off the instrument press and hold button (4) for about 2 sec.
COSMO 70
8
Reference Setting
Default reference setting is from the rear of the device.
Press the button (6) to set the reference: the front or the rear.
When the end-piece is folded out fully, the reference rear is set.
You will see the reference symbol on the display.
Selecting Units
Press and hold the button (5) for 2 sec. until the desired unit is displayed.
Clear-Key
Cancel the last action. Press button (4).
COSMO 70 9
MEASUREMENTS
Single distance measurement
Press button (1) to activate the laser. When in continuous laser mode, press this button to trigger the distance measure-
ment directly. The instrument will give acoustical signal.
The result is displayed immediately.
Continuous Measurement
Press and hold the button (1) for about 2 seconds to start continuous measuring.
Minimum/ Maximum measurement
This function allows the user to measure the minimum or maximum distance from a fixed measuring point. It is com-
monly used to measure room diagonals (maximum values) or horizontal distances (minimum values).
Press and hold down the button (1), until you will hear acoustical signal. Then slowly sweep the laser back and forth
COSMO 70
10
and up and down over the desired target point (e.g. into the corner of a room).
Press (1) to stop continuous measurement. The values for maximum and minimum distances are shown on
the display as well as the last measured value in the main line.
FUNCTIONS
Distance measuring
Press button (5): next measurement is added to the previous one. Press button (3): next measurement is substracted
from the previous one.
To complete this function press button (1). Repeat this function to measure distances. The result is des-
played in the main display area. Previous measured value is displayed in the first line, last measured value
is displayed in the second line. To finish working in this mode press button (4).
Indice
Lingue:
Altri manuali ADA INSTRUMENTS Strumento di misura
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit MICRO Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS TOPLINER 3-360 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS 3D Liner 2V Green Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS WHEEL 50 DIGITAL Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ZHM 125B Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit MICRO Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS Vertical Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit MICRO Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS LASERMARKER 70 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS Ruber-X32 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ZSM 330 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ZHT 60 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ZHT 125 Electronic Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ZFM 100 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS Robot Mini Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS AngleMeter 30 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS COSMO MINI Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit MICRO Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS PROF X15 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ARMO MINI Manuale utente
