ADA INSTRUMENTS Ruber-X32 Manuale utente
Operating manual
Optical level
ADA Ruber-Х32
Manufacturer Address
RUBER- X32
RUBER-X32
MEASUREMENT FOUNDATION
Table of contents
1. General instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2. Technical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1. Functional description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2. Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3. Specications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4. Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. Prepararion before starting to work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
5.1. Set up the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.2.Focusing and surveying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.3. Circular level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.4. Automatic compensator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5.5. Reticule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6. The action of the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.1. Determination of elevation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.2. The measurement of horizontal angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.3. Distance measuring along the stadia hair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
7. Appendix 1- “Certicate of acceptance and sale”
8. Appendix 2- “Warranty card”
3
RUBER-X32
MEASUREMENT FOUNDATION
1. GENERAL INSRUCTIONS
Optical level: model- Ruber-Х32
Before working you should read the maintenance manual!
2. TECHNICAL REQUIREMENTS
2.1. FUNCTIONAL DESCRIPTION
Optical level Ruber-Х32 is equipped with automatic compensator with magnetic damper. When the instrument is
adjusted with circular level, mechanism of automatic compensation xes the line of sight into the horizon.
This instrument is designed to provide stable nwork notwithstanding environment conditions, such as vibration and
large uctuation of temperature.
Optical level has horizontal limb for angle measurement and stadia hairs of reticule can be used for distance mea-
surements.
Ruber-Х32 is designed for general surveying, engineering and construction works.
•
•
•
•
4
RUBER-X32
MEASUREMENT FOUNDATION
7
8
5
9
RUBER- X32
1
2
3
4
6
12
11
14
10
13
2.2. FEATURES
8. Horizontal Knob
9. Objective Lens
10. Horizontal Circle Index
11. Eyepiece
12. Reticle Adjusting Screw Cover
13. Peep sight
14. Compensator locking button
1. Reector
2. Circular level
3. Circular level Adjusting Screw
4. Horizontal Tangent Screw
5. Levelling Foot Screw
6. Base
7. Focusing Knob
5
RUBER-X32
MEASUREMENT FOUNDATION
2.3. SPECIFICATIONS
3. KIT
Optical level, maintenance manual, case, instrument for adjustment stadia hairs, hex-nut wrench, stadia plumb.
SPECIFICATIONS ADA Ruber-Х32
Magnication 32 x
Standard error 1,5 mm
Objective diameter 36 mm
Min. focusing distance 1 m
Compensator working range ±15'
Compensator error ±0.3"/1'
Compensator setting accuracy ±0.5"
Sensitivity of circular bubble 8'/2mm
Limb 360º
Scale minimum value of limb 1º
Level mass 2.1 kg
Environmental temperature, °C -25...+50
6
RUBER-X32
MEASUREMENT FOUNDATION
4. CARE AND MAINTENANCE
Misapplication or negligence of the terms of service instruction can cause damage effect to your health.
Avoid excessive vibration and shocks! Store the instrument and it’s accessories only in carrying case.
Optical level-is an accurate instrument, which should be stored and used with care.
In high humidity and temperature you should dry out the instrument and clean it after usage.
Do not store the instrument at a temperature below -25ºC and above 50ºC, otherwise the instrument can be out of
action.
Do not put the instrument into the carrying case if the instrument or case are wet. To avoid moisture condensation
inside the instrument- dry out the case and the instrument.
Check regularly instrument adjustment!
Keep the lens clean and dry. To clean the lens use soft cotton cloth.
Never place the instrument on the ground.
If you leave the instrument on the tripod, close the lens with cover and cover the instrument.
For cleaning plastic case use neutral detergents or water. Don’t wipe the case with dissolvent.
When you put your level into the case, place all accessories on their places,
5. PREPARATION BEFORE STARTING TO WORK
5.1. SET UP THE INSTRUMENT
1) Untie the belt around tripod legs and untwist clamping screws (Pic.1)
2) Without setting up the tripod, stretch out the legs till the tripod head will be at eye
level. Then tighten clamping screws.
3) The distance between legs should be equal to the equilateral triangle.
Pic.1
•
•
•
•
•
•
•
•
•
•
•
•
7
RUBER-X32
MEASUREMENT FOUNDATION
4) Tripod head should be placed horizontally. Fix the end parts of tripod legs,
plunging them into the ground (Pic.2)
5) Tighten retaining bolt, holding the instrument on the tripod (Pic.3).
6) When you use the tripod with spherical head, loosen slightly retaining bolt.
Holding with both hands the instrument with support (6), move the instru-
ment along the tripod head to make the bubble into the center of the circular
level (8) (Pic.4).
7) Tighten retaining bolt.
8) With the help of leveling screws (5) make the bubble directly into the
center of the circle level (Pic.5)
8
RUBER-X32
MEASUREMENT FOUNDATION
5.2. FOCUSING AND SURVEYING
1) Point the instrument at bright uniform background.
2) Rotate clockwise the ocular ring up to the stop. After that look into the ocular of the telescope and focus the view of
reticule, slightly rotating anticlockwise the ocular ring. You should stop rotating when the view of reticule will be clear. You
shouldn’t repeat this procedure very often.
3) Point the instrument at the staff with the help of front sight (13). Then, with rotation of the knob (4) place the staff in the
center of eyesight. Remove parallax* between the staff and reticule while rotating rack-and-pinion (7).
*Parallax removal
There is no parallax, when the object view and reticule view are xed to each other even if we change eye position to the
ocular. Parallax can cause big measurement errors. That’s why you should remove it with the help of rotating rack-and-
pinion (7).
5.3. CIRCULAR LEVEL
1) With leveling screws (5) make the bubble into the center of circular level (2).
2) Rotate the instrument through a full 180˚ (pic.6).
Pic.6
9
RUBER-X32
MEASUREMENT FOUNDATION
The bubble should be in the center. If it is shifted from the center, follow the instruction:
3) Remove only half of the bubble shift with leveling screws (5) (Pic.7)
4) Remove the remaining half of the bubble shift with rotation of adjusting screws of the level with the
hex-nut wrench (Pic.8).
5) Repeat these actions till the bubble shift will remove completely.
Pic.7 Pic.8
5.4. AUTOMATIC COMPENSATOR
1) Make the bubble into the center of circular level.
2) Point at clear object. Then rotate leveling screw on 1/8 rotation to the right and to the left,
check the shift of the horizontal reticule to the object. Stadia hair should twitch and back to
the previous place.
It is recommended to check the instrument action every time before working.
Note: Level ADA Ruber x32 is equipped with clamp (14) for xation of the level dur-
ing transportation in the case.
Pic.9
10
RUBER-X32
MEASUREMENT FOUNDATION
There is another way to check the compensator.
Make the bubble into the center of circular level.
When you see clear object, hit slightly the tripod legs or the instrument case. Horizontal line should twitch slightly and
back to the previous place.
5.5. RETICULE
1) Set up the instrument between A and B points.
Take readings “a1” and “b1”. (Pic.10)
2) Set up the instrument at 2 m off the point A. Take readings “a2” and “b2”
(Pic.11).
Let the telescope be pointing at front staff.
Pic.10
Compute
b2'=a23-(a1-b1)
if b2'=b2, there is no need in adjustment.
If the difference between b2' and b2 is significant, make the adjustment
in following order:
Pic.11
Indice
Lingue:
Altri manuali ADA INSTRUMENTS Strumento di misura
ADA INSTRUMENTS
ADA INSTRUMENTS ZSM 330 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ZHT 60 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS PRODIGIT MARKER Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit MICRO Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit MICRO Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS PROF X15 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS Cosmo 40 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS AngleMeter 30 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS TOPLINER 3-360 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ZFM 100 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ProDigit MICRO Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS COSMO MINI Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS ZCM 130 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS CUBE 360 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS Vertical Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS Schmidt Hammer 225 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS 3D Liner 2V Green Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS LASERMARKER 70 Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS WHEEL 50 DIGITAL Manuale utente
ADA INSTRUMENTS
ADA INSTRUMENTS Robot Mini Manuale utente
