Advantech AIMB-330F Manuale utente

AIMB-330F

Socket 370 SBC for Multimedia

Applications

User’s Manual

AIMB-330F User’s Manual ii

nal manufacturer reserves the right to make improvements to the products

described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmit-

ted in any form or by any means without the prior written permission of

the original manufacturer. Information provided in this manual is

intended to be accurate and reliable. However, the original manufacturer

assumes no responsibility for its use, nor for any infringements upon the

rights of third parties that may result from such use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

VIA is a trademark of VIA Technologies, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows® is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

ESS is a trademark of ESS Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

SMI is a trademark of Silicon Motion, Inc.

Creative is a trademark of Creative Technology LTD.

All other product names or trademarks are properties of their respective

owners.

For more information on this and other Advantech products, please visit

our websites at: http://www.advantech.com

http://www.advantech.com/epc

For technical support and service, please visit our support website at:

http://service.advantech.com.tw/eservice/

This manual is for the AIMB-330F Series.

Part No.2006033020

2nd Edition, September 2004

iii

Packing List

Before you begin installing your card, please make sure that the following

materials have been shipped:

• 1 AIMB-330 all-in one single board computer

• 1 CD-ROM or disks for utility, drivers, and manual (in PDF format)

• 1 warranty certificate

• 1 UDMA/66IDE flat cable

• 1 startup manual

• 1 2-port serial port cable

• 1 4-port serial cable (AIMB-330F only)

• 1 IEEE 1394 cable (optional)

If any of these items are missing or damaged, contact your distributor or

sales representative immediately.

AIMB-330F User’s Manual iv

Additional Information and Assistance

Step 1. Visit the Advantech web site at www.advantech.com where you

can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version, application

software, etc.)

• A complete description of the problem

• The exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or let-

ting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according

to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE

THE STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR

ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE

EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED.REPLACE ONLY WITH THE SAME OR EQUIVALENT

TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED

BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUC-

TIONS.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advan-

tech disclaims all responsibility for the accuracy of any statements contained

herein.

AIMB-330F User’s Manual vi

W i c h t i g e S i c h e r h e i s h i n w e i s e

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie

Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch

zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht

zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen

oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhit-

zung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann.

Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom

Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädi-

gung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten

in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag aus-

lösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen

Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen

und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert

oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Batte-

rie.Ersatz nur durch densellben order einem vom Hersteller empfohlene-

mahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des

Herstellers.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000

beträgt 70dB(A) oder weiger.

DISCLAIMER: This set of instructions is given according to IEC704-1.

Advantech disclaims all responsibility for the accuracy of any statements

contained herein.

vii

Caution! Danger of explosion if battery is incorrectly

replaced. Replace only with the same or equiv-

alent type recommended by the manufacturer.

Dispose of used batteries according to the man-

ufacturer’s instructions.

AIMB-330F User’s Manual viii

Content

Chapter 1 General Information ........................................2

1.1 Introduction ....................................................................... 2

1.2 Features ............................................................................. 3

1.3 Specifications .................................................................... 4

1.4 Board Dimensions............................................................. 6

Figure 1.1:Board Dimensions (Component Side)........... 6

Figure 1.2:Board Dimensions (Solder Side)................... 7

Chapter 2 Installation ......................................................10

2.1 Jumpers............................................................................ 10

2.2 Connectors....................................................................... 10

2.3 Locating jumpers and connectors.................................... 12

Figure 2.1:Locating Jumpers & Connectors................. 12

Figure 2.2:Locating Jumpers & Connectors(soldor side).

2.4 Setting Jumpers ............................................................... 14

2.5 CPU installation and upgrading ...................................... 15

2.5.1 Installing a CPU in the ZIF socket................................ 15

2.5.2 CMOS clear (JP1)......................................................... 16

2.6 DRAM installation .......................................................... 16

2.6.1 DDR SDRAM (DIMM 1 and DIMM 2)....................... 16

2.7 Primary (3.5") IDE connector (CN22)............................ 17

2.7.1 Connecting the hard drive............................................. 17

2.8 Secondary (2.5") IDE connector (CN20) ........................ 17

2.9 FDD connector (CN23) (optional) .................................. 18

2.9.1 Connecting the floppy drive ......................................... 18

2.10 LPT1 (primary parallel port) connectors .............. (CN5)19

2.11 LPT2 (secondary parallel port) connector (CN26) ......... 19

2.12 Keyboard/mouse connectors (CN6)................................ 19

2.13 Power connectors (CN18, FAN1, FAN2) ....................... 19

2.13.1 ATX power input connector (CN18)............................ 19

2.13.2 Fan power supply connector (FAN2, FAN1) ............... 19

2.14 Audio interfaces (CN4, CN10, CN11)............................ 20

2.14.1 Audio connector (CN4) ................................................ 20

2.14.2 Internal Speaker Connector (CN10) ............................. 20

2.14.3 CD audio-in connector (CN11)..................................... 20

2.15 Serial (COM1-6) (CN2, CN27, CN25) ........................... 20

2.15.1 Primary (COM1:CN2,COM2:CN27) ........................... 20

2.15.2 Secondary (COM3~COM6: CN25).............................. 20

2.16 COM-2 RS232/422/485 &COM 1-6 Ring select (9x2 ,

AIMB-330 User’s Manual x

2.0mm Pin-header) (JP4)21

2.17 COM1~COM6 Pin-9 voltage output select(JP3) ............ 21

2.18 VGA interface connections ............................................. 23

2.18.1 CRT display connector (CN1) ...................................... 23

2.18.2 Flat panel display connector (CN13,CN14) ................. 23

2.18.3 LCD VDDSAFE setting (JP2)...................................... 24

2.18.4 Inverter power connector (CN17)................................. 24

2.19 Ethernet configuration..................................................... 24

2.19.1 RJ-45 connector (CN9)................................................. 24

2.19.2 Network boot ................................................................ 24

2.20 Watchdog timer configuration ........................................ 25

2.21 USB connector (CN7,CN9,CN16).................................. 25

2.22 Digital I/O (CN19: 4 Outputs, 4 Inputs) ......................... 25

2.22.1 Digital output programming ......................................... 26

2.23 IrDA Connector (CN21).................................................. 26

2.24 Front Panel Connector(CN21) ........................................ 26

2.25 COMS Power (JP1)......................................................... 26

2.26 Watch Dog programer (CN12)........................................ 27

2.27 PCI slot expension (PCI1 or PCI2) ................................. 27

Chapter 3 Chipset Software Installation Utility............30

3.1 Before you begin ............................................................. 30

3.2 Introduction ..................................................................... 30

3.3 Installing VIA CLE266 the Utility.................................. 31

3.4 Connections for Standard LCDs ..................................... 36

Chapter 4 Audio Setup.....................................................38

4.1 Introduction ..................................................................... 38

4.2 Driver installation............................................................ 38

4.2.1 Before you begin........................................................... 38

4.2.3 Windows 2000 drivers.................................................. 41

Chapter 5 VGA Setup ......................................................46

5.1 Introduction ..................................................................... 46

5.2 Windows XP Installation ............................................... 46

5.3 Installation for Windows 2000........................................ 50

5.4 Dual Display Setting ....................................................... 52

Chapter 6 Award BIOS Setup.........................................58

6.1 Introduction ..................................................................... 58

6.1.1 CMOS RAM Auto-backup and Restore ....................... 58

6.2 Entering Setup................................................................. 59

Figure 6.1:Award BIOS Setup initial screen ................ 59

6.3 Standard CMOS Setup .................................................... 60

Figure 6.2:Standard CMOS features screen ................. 60

Indice

Altri manuali Advantech Scheda madre

Advantech

Advantech AIMB-556 Manuale utente

Advantech

Advantech PCA-6751 Series Manuale utente

Advantech

Advantech AIMB-240 Series Manuale di installazione e funzionamento

Advantech

Advantech PCM-5820 Series Manuale di installazione e funzionamento

Advantech

Advantech PCI-7030 Manuale utente

Advantech

Advantech AIMB-740 Series Manuale utente

Advantech

Advantech AIMB-760 Manuale di installazione e funzionamento

Advantech

Advantech PCA-6774 Manuale utente

Advantech

Advantech AIMB-205 Manuale utente

Advantech

Advantech SOM-5871 Manuale utente

Advantech

Advantech PCM-5820 Series Manuale utente

Advantech

Advantech PCM-3355 Manuale di installazione e funzionamento

Advantech

Advantech PCE-5129 Manuale di installazione e funzionamento

Advantech

Advantech MIO-5850 Manuale utente

Advantech

Advantech AIMB-788 Manuale di installazione e funzionamento

Advantech

Advantech PCM-4153-A2 Manuale di installazione e funzionamento

Advantech

Advantech PCM-3365 Manuale utente

Advantech

Advantech AIMB-251 Series Manuale utente

Advantech

Advantech PCM-9590 Manuale utente

Advantech

Advantech SIMB-A01 Manuale di installazione e funzionamento

Advantech

Advantech PCA-6155V Manuale utente

Advantech

Advantech SOM-DB4700 Manuale utente

Advantech

Advantech AIMB-225 Manuale utente

Advantech

Advantech PCM-9590 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente