Agilent Technologies 4352B Manuale utente

Errata

Title & Document Type: 4352B VOC/PLL Signal Analyzer Service Manual

Manual Part Number: 04352-90141

Revision Date: June 2000

HP References in this Manual

This manual may contain references to HP or Hewlett-Packard. Please note that

Hewlett-Packard's former test and measurement, semiconductor products and chemical

analysis businesses are now part of Agilent Technologies. We have made no changes to

this manual copy. The HP XXXX referred to in this document is now the Agilent XXXX.

For example, model number HP8648A is now model number Agilent 8648A.

About this Manual

We’ve added this manual to the Agilent website in an effort to help you support your

product. This manual provides the best information we could find. It may be incomplete

or contain dated information, and the scan quality may not be ideal. If we find a better

copy in the future, we will add it to the Agilent website.

Support for Your Product

Agilent no longer sells or supports this product. You will find any other available product

information on the Agilent Test & Measurement website:

www.tm.agilent.com

Search for the model number of this product, and the resulting product page will guide

you to any available information. Our service centers may be able to perform calibration

if no repair parts are needed, but no other support from Agilent is available

Agilent 4352B V

CO/PLL Signal Analyzer

Service Manual

SERIAL NUMBERS

This manual applies directly to instruments with

serial number prex JP1KE00196 or above

or additional important information about serial numbers,

read \Serial Number" in Appendix Aofthis Manual.

Agilent Part No. 04352-90141

Printed in JAPAN June 2000

Second Edition

Notice

The information contained in this document is subject to change without notice

This document contains proprietary information that is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced, or translated to another

language without the prior written consent of the Agilent T

echnologies .

Agilent T

echnologies Japan, Ltd.

Component T

est PGU-Kobe

1-3-2, Murotani, Nishi-ku, Kobe-shi,

Hyogo

,651-2241 Japan

MS-DOS



is aU

.S. registered trademark of Microsoft Corporation.



Printing History

December 1997

:::::::::::::::

::::::::::::::: ::

First Edition (part number: 04352-90141)

June 2000

:::::::

:::: :: :: :::::::::::::

Second Edition (part number: 04352-90141)

iii

Safety Summary

The following general safety precautions must be observed during all phases of operation,

service

,and repair of this instrument. F

ailure to comply with these precautions or with specic

ARNINGS

elsewhere in this manual may impair the protection provided by the equipment.

In addition, it violates safety standards of design, manufacture, and intended use of the

instrument.

The A

gilent T

echnologies assumes no liability for the customer's failure to comply with these

requirements

Note

The 4352B complies with INST

ALLA

TION CA

TEGORY II and POLLUTION

DEGREE 2in IEC1010-1. The 4352B is an INDOOR USE product.

Ground The Instrument

oavoid electric shock hazard, the instrument chassis and cabinet must be connected to a

safety earth ground using the supplied power cable with earth blade

DO NOT Operate In An Explosive Atmosphere

Do not operate the instrument in the presence of ammable gasses or fumes

.Operation of any

electrical instrument in such an environment constitutes asafety hazard.

Keep A

way From Live Circuits

Operating personnel must not remove instrument covers

.Component replacement and internal

adjustments must be made by qualied maintenance personnel. Do not replace components

with the power cable connected. Under certain conditions

,dangerous voltages may exist even

with the power cable removed. T

oavoid injuries

,always disconnect power and discharge

circuits before touching them.

DO NOT Service Or A

djust Alone

Do not attempt internal service or adjustment unless another person, capable of rendering rst

aid and resuscitation, is present.

DO NOT Substitute P

arts Or Modify Instrument

Because of the danger of introducing additional hazards

, do not install substitute parts or

perform unauthorized modications to the instrument. Return the instrument to a Agilent

Technologies Sales and Service Oce for service and repair to ensure the safety features are

maintained.

Dangerous Procedure W

arnings

Warnings

, such as the example below

, precede potentially dangerous procedures throughout

this manual. Instructions contained in the warnings must be followed.

Warning

Dangerous voltages, capable of causing death, are present in this

instrument. Use extreme caution when handling, testing, and adjusting

this instrument.

Typeface Conventions

Bold

Boldface type is used when aterm is dened. F

or example:

icons

are

symbols

Italics

Italic type is used for emphasis and for titles of manuals and other

publications

Italic type is also used for keyboard entries when aname or a variable

must be typed in place of the words in italics

.For example:

copy

lename

means to type the word

copy

,to type a space, and then to

type the name of ale such as

file1

Computer

Computer font is used for on-screen prompts and messages.

HARDKEYS

Labeled keys on the instrument front panel are enclosed in

NNNNNNNNNNNNNNNNNNNNNNNNNN

SOFTKEYS

Softkeys located to the right of the CRT are enclosed in

NNNNN

Certication

Agilent T

echnologies certies that this product met its published specications at the time

of shipment from the factory. Agilent T

echnologies further certies that its calibration

measurements are traceable to the United States National Institute of Standards and

echnology

,to the extent allowed by the Institution's calibration facility

,orto the calibration

facilities of other International Standards Organization members.

arranty

This Agilent T

echnologies instrument product is warranted against defects in material and

workmanship for aperiod of one year from the date of shipment, except that in the case of

certain components listed in

Instrument Specications

of this manual, the warranty shall be

for the specied period. During the warranty period, Agilent T

echnologies will, at its option,

either repair or replace products that prove to be defective

or warranty service or repair

,this product must be returned to aservice facility designated by

Agilent Technologies

.Buyer

shall prepay shipping charges to Agilent T

echnologies and Agilent

echnologies shall pay shipping charges to return the product to Buyer

.However

,Buyer shall

pay all shipping charges

,duties

,and taxes for products returned to Agilent T

echnologies from

another country

Agilent T

echnologies warrants that its software and rmware designated by Agilent

echnologies for use with an instrument will execute its programming instruction when

properly installed on that instrument. Agilent T

echnologies does not warrant that the operation

of the instrument, or software

,or rmware will be uninterrupted or error free.

Limitation Of W

arranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate

maintenance by Buyer

,Buyer-supplied software or interfacing, unauthorized modication or

misuse

,operation outside of the environmental specications for the product, or improper site

preparation or maintenance

No other warranty is expressed or implied. A

gilent T

echnologies specically disclaims the

implied warranties of merchantability and tness for a particular purpose

Exclusive Remedies

The remedies provided herein are buyer's sole and exclusive remedies

gilent T

echnologies

shall not be liable for any direct, indirect, special, incidental, or consequential damages,

whether based on contract, tort, or any other legal theory

Assistance

Product maintenance agreements and other customer assistance agreements are available for

Agilent T

echnologies products

or any assistance

,contact your nearest Agilent Technologies Sales and Service Oce

ddresses are provided at the back of this manual.

vii

Safety Symbols

General denitions of safety symbols used on equipment or in manuals are listed below

Instruction manual symbol: the product is marked with this symbol when it is

necessary for the user to refer to the instruction manual.

Alternating current.

Direct current.

On (Supply).

O (Supply).

This

arning

sign denotes ahazard. It calls attention to a procedure

,practice

condition or the like

,which, if not correctly performed or adhered to

,could

result in injury or death to personnel.

This

Caution

sign denotes ahazard. It calls attention to a procedure

, practice

condition or the like

,which, if not correctly performed or adhered to

,could

result in damage to or destruction of part or all of the product.

This

Note

sign denotes important information. It calls attention to a

procedure

, practice

, condition or the like

,which is essential to highlight.

viii

Document Guide

Please utilize the following manuals when using the analyzer:

Function Reference

Explains the operations commonly used for measurement and illustrates all functions

accessed from the front panel keys and softkeys

.It

also provides information on options

and accessories available, specications, system performance

,andconceptual

information about the analyzer's features.

GPIB Programming Manual

Explains the basic programming methods used when remotely controlling the analyzer

with GPIB

.Also

,contains information on the usage of all GPIB commands

,the status

report mechanism, and the data transmission format.

Manual Supplement for HP Instrument B

ASIC User's Handbook

Describes how HP Instrument B

ASIC works with the analyzer.

HP Instrument B

ASIC User's Handbook

Explains the usage of HP Instrument B

ASIC including general programming examples

and hints

.Also

,explains all HP Instrument B

ASIC commands

. This manual consists of

the following three parts: \HP Instrument BASIC Programming T

echnique

," \HP

Instrument B

ASIC Interface Technique

," and \HP Instrument B

ASIC Language

Reference

Service Manual

Explains how to do performance tests

,and to adjust, troubleshoot, and repair the

instrument.

Altri manuali per 4352B

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies HP 8719D Manuale utente

Agilent Technologies

Agilent Technologies 4100 Manuale utente

Agilent Technologies

Agilent Technologies U1701B Manuale

Agilent Technologies

Agilent Technologies E5071C ENA Series Manuale utente

Agilent Technologies

Agilent Technologies HP 8566B Manuale del proprietario

Agilent Technologies

Agilent Technologies 34952a Manuale utente

Agilent Technologies

Agilent Technologies 85052A Istruzioni operative

Agilent Technologies

Agilent Technologies E5061B Manuale utente

Agilent Technologies

Agilent Technologies 4338B Manuale utente

Agilent Technologies

Agilent Technologies E4402/7B Manuale

Agilent Technologies

Agilent Technologies E8362C Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies E5071C Manuale utente

Agilent Technologies

Agilent Technologies 8560 E-Series Manuale utente

Agilent Technologies

Agilent Technologies X Series Manuale utente

Agilent Technologies

Agilent Technologies Agilent 8163A Istruzioni operative

Agilent Technologies

Agilent Technologies E4440A Guida rapida

Agilent Technologies

Agilent Technologies 4286A Manuale utente

Agilent Technologies

Agilent Technologies ADM series Manuale utente

Agilent Technologies

Agilent Technologies NFA Series Manuale per l'uso e la cura

Agilent Technologies

Agilent Technologies B1500A Guida all'installazione

Agilent Technologies

Agilent Technologies 4155B Manuale utente

Agilent Technologies

Agilent Technologies 4263B Manuale utente

Agilent Technologies

Agilent Technologies E4445A PSA Series Guida rapida

Agilent Technologies

Agilent Technologies E8362A PNA Series Guida rapida

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente