Agilent Technologies U1701B Manuale

Agilent Technologies

Agilent U1701B

Dual Display Handheld

Capacitance Meter

User’s and Service Guide

II U1701B User’s and Service Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

U1701-90055

Edition

Third Edition, June 25, 2012

Printed in Malaysia

Agilent Technologies, Inc.

5301 Stevens Creek Blvd.

Santa Clara, CA 95051 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

U1701B User’s and Service Guide III

Safety Symbols

The following symbols on the instrument and in the documentation

indicate precautions which must be taken to maintain safe operation of

the instrument.

Direct current Off (supply)

Alternating current On (supply)

Both direct and alternating

current

Equipment protected throughout

by double insulation or reinforced

insulation.

Three-phase alternating current Caution, risk of electric shock.

Earth (ground) terminal Caution, risk of danger (refer to

this manual for specific Warning

or Caution information.

Protective conductor terminal Caution, hot surface.

Frame or chassis terminal Out position of a bi-stable push

control.

Equipotentiality In position of a bi-stable push

control.

IV U1701B User’s and Service Guide

General Safety Information

The following general safety precautions must be observed during all phases of

operation, service and repair of this instrument. Failure to comply with these

precautions or with specific warnings elsewhere in this manual violates safety

standards of design, manufacture and intended use of the instrument. Agilent

Technologies assumes no liability for the customer’s failure to comply with these

requirements.

WARNING

• Read this operation manual completely before using this device and

follow all safety instructions.

• This device is for indoor use at an altitude of up to 2000 m.

• Avoid working alone.

• Use the device only as specified in this manual; otherwise, the

protection provided by the meter may be impaired.

• Never measure voltage with this meter.

• Do not use this device if it looks damaged.

• Inspect the leads for damaged insulation or exposed metal. Replace

damaged leads.

• Disconnect the power and discharge all high-voltage capacitors

before testing.

• Be cautious when working with voltages above 60 VDC or 30 VRMS

and 42.4 Vpeak, as it may cause a shock hazard.

• Always use specified battery.

• The meter is designed in compliance with IEC 61010-1.

• CE requirement: Under the influence of RF field according to

standard, the supplied test leads will pick up induced noise. To have

better shielding effect, a short-twisted lead should be used.

CAUTION

• Ensure proper insertion of battery in the meter, and follow the correct

polarity.

U1701B User’s and Service Guide V

Environment Conditions

This instrument is designed for indoor use in areas with low condensation and to

be used with standard or compatible test probes. Table 1-1 shows general

environment requirements.

Table 1 -1 Environment Requirements

Environment Conditions Requirements

Operating environment Full accuracy at 0 °C to 50 °C

Operating relative humidity Full accuracy up to 80% RH for

temperature up to 31 °C, decreasing

linearly to 50% RH at 50 °C

Storage humidity 0 – 80% R.H. non condensing

Storage environment –20 °C to 60 °C

Altitude 0 – 2000 m

Pollution Degree Pollution Degree 2

VI U1701B User’s and Service Guide

CAUTION

The U1701B dual display handheld capacitance meter complies with

the following safety and EMC requirements:

• IEC 61010-1:2001/EN 61010-1:2001 (2nd Edition)

• CISPR 11:2003+A1:2004

• IEC 61000-4-2:1995+A1:1998 +A2:2000

• IEC 61000-4-3:2006

• IEC 61000-4-4:2004

• IEC 61000-4-5:2005

• IEC 61000-4-6:2003+A1:2004+A2:2006

• IEC 61000-4-11:2004

• Canada: ICES/NMB-001:2004

• Australia/New Zealand: AS/NZS CISPR11:2004

CAUTION

Degradation of some product specifications can occur in the presence

of ambient electromagnetic (EM) fields and noise that couples to the

product's powerline, communication or I/O cables. The product

self-recovers and operates to all specifications when the source of the

ambient EM field and noise are removed or the product is protected

from the ambient EM field or the product cabling is shielded from the

ambient EM noise.

U1701B User’s and Service Guide VII

Regulatory Markings

Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not

discard this electrical/electronic product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1,

this instrument is classified as a “Monitoring and Control Instrument”

product. The affixed product label is shown as below:

Do not dispose in domestic household waste

To return this unwanted instrument, contact your nearest Agilent office,

or visit:

www.agilent.com/environment/product

for more information.

The CE mark is a registered trademark

of the European Community.This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia. This

signifies compliance with the Australia

EMC Framework regulations under the

terms of the Radio Communication Act

of 1992.

ICES/NMB-001 indicates that this ISM

device complies with Canadian

ICES-001.

This instrument complies with the

WEEE Directive (2002/96/EC) marking

requirement. This affixed product label

indicates that you must not discard this

electrical/electronic product in

domestic household waste.

VIII U1701B User’s and Service Guide

Declaration of Conformity (DoC)

The Declaration of Conformity (DoC) for this instrument is available on

the Web site. You can search the DoC by its product model or description.

http://regulations.corporate.agilent.com/DoC/search.htm

NOTE

If you are unable to search for the respective DoC, please contact your

local Agilent representative.

U1701B User’s and Service Guide IX

In This Guide…

1Getting Started Chapter 1 introduces key features and steps to get

started with the U1701B dual display handheld capacitance meter. This

chapter also guides you through the basics of the front panel operations.

2Features and Functions Chapter 2 describes the features and

functions that are available in the U1701B dual display handheld

capacitance meter in step-by-step instructions.

3Default Setting Configurations Chapter 3 describes on how to

change and configure the default setting of the U1701B dual display

handheld capacitance meter and other setting features

4Service and Maintenance Chapter 4 provides the information on the

warranty, services, maintenance procedures and troubleshooting hints to

solve general problems that you may encounter with the meter.

5Specifications and Characteristics Chapter 5 lists U1701B‘s

electrical specifications, general specifications, and SMD Tweezer’s

specifications.

X U1701B User’s and Service Guide

Indice

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies Agilent 8163A Manuale utente

Agilent Technologies

Agilent Technologies B1542A Manuale utente

Agilent Technologies

Agilent Technologies OmniBER 720 Manuale utente

Agilent Technologies

Agilent Technologies U1701A Manuale utente

Agilent Technologies

Agilent Technologies ESA-E Series Manuale

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Manuale dell'operatore

Agilent Technologies

Agilent Technologies 8702D Manuale utente

Agilent Technologies

Agilent Technologies E5061B Manuale utente

Agilent Technologies

Agilent Technologies 6800 Series Guida rapida

Agilent Technologies

Agilent Technologies HP 8566B Manuale del proprietario

Agilent Technologies

Agilent Technologies 1156A Manuale utente

Agilent Technologies

Agilent Technologies 34136A Manuale utente

Agilent Technologies

Agilent Technologies U3025AE10 Manuale utente

Agilent Technologies

Agilent Technologies 2100 Bioanalyzer System Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies U1461A Manuale utente

Agilent Technologies

Agilent Technologies 4200 FlexScan Manuale utente

Agilent Technologies

Agilent Technologies 8753ET Guida alla configurazione

Agilent Technologies

Agilent Technologies 4395A Manuale del proprietario

Agilent Technologies

Agilent Technologies 5977B Series Manuale operativo

Agilent Technologies

Agilent Technologies N1913a Manuale utente

Agilent Technologies

Agilent Technologies PSA Series Guida rapida

Agilent Technologies

Agilent Technologies 4291B Manuale utente

Agilent Technologies

Agilent Technologies 8590 Series Manuale utente

Agilent Technologies

Agilent Technologies FieldFox N9913A Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente