Agilent Technologies 8920B Manuale utente
1
Agilent Technologies 8920B Option 800, 801
RF Communications Test Set
Condensed Programming Reference Guide
8290B Firmware Version B.06.00 and above
Agilent Technologies No. 08920-90239
Printed in U. S. A.
April 2000
Rev. B
2
Copyright © Agilent Technologies 1999, 2000
Notice No part of this manual may be reproduced in any form or by any means (including
electronic storage and retrieval or translation into a foreign language) without prior
agreement and written consent from Agilent Technologies Inc. as governed by
United States and international copyright laws.
The material contained in this document is subject to change without notice. Agi-
lent Technologies makes no warranty of any kind with regard to this material, in-
cluding, but not limited to, the implied warranties of merchantability and fitness for
a particular purpose. Agilent Technologies Inc. shall not be liable for errors con-
tained herein or for incidental or consequential damages in connection with the fur-
nishing, performance, or use of this material.
U.S. Government users will receive no greater than Limited Rights as defined in
FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Agilent Technologies
Learning Products Department
24001 E. Mission
Liberty Lake, WA 99019-9599
U.S.A.
Edition/Print Date
All Editions and Updates of this manual and their creation dates are listed below.
Rev. A . . . . . October 1999
Rev. B . . . . . April 2000
Product Markings CE - the CE mark is a registered trademark of the European Community. A CE
mark accompanied by a year indicated the year the design was proven.
CSA - the CSA mark is a registered trademark of the Canadian Standards Associ-
ation.
3
CERTIFICATION
Agilent Technologies certifies that this product met its published specifications at
the time of shipment from the factory. Agilent Technologies further certifies that its
calibration measurements are traceable to the United States National Institute of
Standards and Technology, to the extent allowed by the Institute’s calibration facil-
ity, and to the calibration facilities of other International Standards Organization
members
Agilent Technologies Warranty Statement for Commercial Products
Agilent Technologies 8920A RF Communications Test Set
Duration of
Warranty: 1 year 1. Agilent Technologies warrants Agilent Technologies hardware, accessories and
supplies against defects in materials and workmanship for the period specified above.
If Agilent Technologies receives notice of such defects during the warranty period,
Agilent Technologies will, at its option, either repair or replace products which prove
to be defective. Replacement products may be either new or like-new.
2Agilent Technologies warrants that Agilent Technologies software will not fail to exe-
cute its programming instructions, for the period specified above, due to defects in ma-
terial and workmanship when properly installed and used. If Agilent Technologies
receives notice of such defects during the warranty period, Agilent Technologies will
replace software media which does not execute its programming instructions due to
such defects.
3. Agilent Technologies does not warrant that the operation of Agilent Technologies
products will be uninterrupted or error free. If Agilent Technologies is unable, within a
reasonable time, to repair or replace any product to a condition as warranted, customer
will be entitled to a refund of the purchase price upon prompt return of the product.
4Agilent Technologies products may contain remanufactured parts equivalent to new in
performance or may have been subject to incidental use.
5. The warranty period begins on the date of delivery or on the date of installation if
installed by Agilent Technologies. If customer schedules or delays Agilent
Technologies installation more than 30 days after delivery, warranty begins on the 31st
day from delivery.
6Warranty does not apply to defects resulting from (a) improper or inadequate mainte-
nance or calibration, (b) software, interfacing, parts or supplies not supplied by Agilent
Technologies, (c) unauthorized modification or misuse, (d) operation outside of the
published environmental specificationsfor the product, or (e) improper site preparation
or maintenance.
7TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES
ARE EXCLUSIVE AND NO OTHER WARRANTYOR CONDITION, WHETHER
WRITTEN OR ORAL IS EXPRESSED OR IMPLIED AND AGILENT TECHNOL-
OGIES SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR CONDI-
TIONS OR MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS
FOR A PARTICULAR PURPOSE.
4
8. Agilent Technologies will be liable for damage to tangible property per incident up to
the greater of $300,000 or the actual amount paid for the product that is the subject of
the claim, and for damages for bodily injury or death, to the extent that all such damages
are determined by a court of competent jurisdiction to have been directly caused by a
defective Agilent Technologies product.
9. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS
WARRANTY STATEMENT ARE CUSTOMER’S SOLE AND EXCLUSIVE
REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL AGILENT
TECHNOLOGIES OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR
DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST
PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT,
TORT, OR OTHERWISE.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND:
THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO
THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE RESTRICT OR
MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY
RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.
ASSISTANCE Product maintenance agreements and other customer assistance agreements are
available for Agilent Technologies products. For any assistance, contact your
nearest Agilent Technologies Sales and Service Office.
5
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:
Manufacturer’s Address:
declares that the product
Product Name:
Model Number:
Product Options:
Agilent Technologies
24001 E. Mission Avenue
Liberty Lake, Washington 99019-9599
USA
RF Communications Test Set / Cell Site Test Set
AgilentTechnologies8920A,8920B,and8921A
This declaration covers all options of the above
product.
conforms to the following Product specifications:
Safety: IEC 1010-1:1990+A1+A2/EN 61010-1:1993
EMC: CISPR 11:1990 / EN 55011:1991 Group 1, Class A
EN 5 008 2-1 : 1992
IEC 801-2:1991 - 4 kV CD, 8 kV AD
IEC 801-3:1984 - 3V/m
IEC 801-4:1988 - 0.5 kV Sig. Lines, 1 kV Power Lines
Supplementary Information:
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
This product herewith complies with the requirements of the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC and carries the CD-marking accordingly.
Spokane, Washington USA Date October 17, 1996 Vince Roland/Quality Manager
6
Service and
Support Any adjustment, maintenance, or repair of this product must be performed by qual-
ified personnel. Contact your customer engineer through your local Agilent Tech-
nologies Service Center. You can find a list of local service representatives on the
Web at:
http://www.agilent-tech.com/services/English/index.html
If you do not have access to the Internet, one ofthese centers can direct you to your
nearest representative:
Table 1
United States Test and Measurement Call Center
(Toll free in US) (800) 452-4844
Europe (31 20) 547 9900
Canada (905) 206-4725
Japan Measurement Assistance Center (81) 426 56 7832
|(81) 426 56 7840 (FAX)
Latin America (305) 267 4288 (FAX)
Australia/New Zealand 1 800 629 485 (Australia)
0800 738 378 (New Zealand)
Asia-Pacific (852) 2599 7777
(852) 2506 9285 (FAX)
Contents
7
1 Remote/Local Modes
Remote/Local Modes 18
Contents
8
2 GPIB Command Syntax
GPIB Command Syntax Listings 22
Adjacent Channel Power (ACP) 25
AF Analyzer 27
AF Generator 1 33
AFGenerator2|Encoder 35
AF Generator 2 Pre-Modulation Filters 43
Call Processing 45
Configure 97
Decoder 107
Display 109
Measure 111
Oscilloscope 121
Program 127
Radio Interface 129
RF Analyzer 131
RF Generator 133
RF Path Control 137
Save/Recall Registers 139
Special (GPIB Only Commands) 141
Contents
9
Spectrum Analyzer 143
Status 145
System 149
Tests 151
Trigger
155
Integer Number Setting Syntax 157
Real Number Setting Syntax 159
Multiple Real Number Setting Syntax 161
Number Measurement Syntax 163
Multiple Number Measurement Syntax 165
Contents
10
3 GPIB Common Commands
IEEE 488.2 Common Commands 168
Common Command Descriptions 169
Indice
Altri manuali Agilent Technologies Apparecchiature di prova
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Agilent Technologies
Agilent Technologies aurora Duet Manuale utente
Agilent Technologies
Agilent Technologies E1852A Manuale utente
Agilent Technologies
Agilent Technologies 85032F Manuale
Agilent Technologies
Agilent Technologies J-BERT N4903 Manuale utente
Agilent Technologies
Agilent Technologies 8156A Istruzioni operative
Agilent Technologies
Agilent Technologies InfiniiVision 5000 Series Manuale utente
Agilent Technologies
Agilent Technologies 85056A Manuale
Agilent Technologies
Agilent Technologies InfiniiVision 3000 X-Series Manuale
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies E4406A VSA Series Manuale di installazione e funzionamento
Agilent Technologies
Agilent Technologies 93000 SOC Series Guida all'installazione
Agilent Technologies
Agilent Technologies 85052D Manuale
Agilent Technologies
Agilent Technologies 93000 SOC Series Guida all'installazione
Agilent Technologies
Agilent Technologies E7495A RF Manuale di istruzioni
Agilent Technologies
Agilent Technologies 8000 Series Manuale utente
Agilent Technologies
Agilent Technologies 16047A Manuale operativo
Agilent Technologies
Agilent Technologies 8924C Manuale di servizio
Agilent Technologies
Agilent Technologies Medalist i3070 Series 5i Manuale
Agilent Technologies
Agilent Technologies U3042AE08 Manuale utente
