Agilent Technologies 1290 infinity Manuale di istruzioni

Agilent Technologies

Agilent 1290 Infinity

Pump Head

Maintenance

Technical Note

Notices

2016

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from Agi-

lent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

G4220-90122 Rev. C

Edition

01/2016

Printed in Germany

Agilent Technologies

Hewlett-Packard-Strasse 8

76337 Waldbronn

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and licensed

as “Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in

FAR 2.101(a) or as “Restricted computer

software” as defined in FAR 52.227-19

(June 1987) or any equivalent agency regu-

lation or contract clause. Use, duplication

or disclosure of Software is subject to Agi-

lent Technologies’ standard commercial

license terms, and non-DOD Departments

and Agencies of the U.S. Government will

receive no greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will receive

no greater than Limited Rights as defined in

FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could

result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION

notice until the indicated condi-

tions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice,

or the like that, if not correctly

performed or adhered to, could

result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indi-

cated conditions are fully

understood and met.

Contents

1 Introduction 5

Introduction 6

Overview of Pump Head Assemblies 7

Overview of Maintenance Parts 8

2 Pump Head Maintenance (Binary and High Speed Pumps) 11

Disassembling the Pump Head 12

Primary Pump Head 16

Secondary Pump Head 26

Replacing Wash Seal and Gasket 39

Assembling the Pump Head 41

3 Pump Head Maintenance (Quaternary and Flexible Pumps) 53

Disassembling the Pump Head 54

Primary Pump Head 58

Secondary Pump Head 68

Replacing Wash Seal and Gasket 82

Assembling the Pump Head 84

4 Overview of 1290 Infinity Pump Service Kit 97

Overview of 1290 Infinity Pump Service Kit 98

Contents

Agilent Technologies

Introduction

Introduction 6

Overview of Pump Head Assemblies 7

Overview of Maintenance Parts 8

1Introduction

Introduction

This technical note describes the pump head maintenance for the following

pumps:

•1290 Infinity Binary Pump G4220A/B

•1290 Infinity Quaternary Pump G4204A

•1290 Infinity II High Speed Pump G7120A

•1290 Infinity II Flexible Pump G7104A

Agilent recommends using refurbished pump heads for maintenance and

repair instead of disassembling pump heads. Such pump heads are available

through Agilent service.

Please carefully follow all instructions step by step and use recommended

tools like the pump head alignment tool and a torque wrench. Any deviation

from these procedures may damage pump heads or may significantly reduce

the life time of the pump heads.

The 1290 Infinity pump service kit (5067-4699) includes all tools required for

the procedures described in the technical note.

Introduction 1

Overview of Pump Head Assemblies

Table 1 Overview of pump head assemblies

Pump Pump Head Assembly Seal Wash Function

G4220A/B Channel A: G4220-60200

Channel B: G4220-60210

Yes

Channel A: G4220-60400

Channel B: G4220-60410

G4204A G4204-60200 Yes

G4204-60400 No

G7120A Channel A: G4220-60900

Channel B: G4220-60910

Yes

G7104A G4204-60600 Yes

1Introduction

Overview of Maintenance Parts

General

Figure 1 Pump heads channel A and B (Binary Pump, High Speed Pump)

Pump head assembly

channel B

Pump head assembly

channel A

High pressure filter assembly

Outlet valve

Primary pump head

Secondary pump head

Inlet valve (not shown)

Heat exchanger capillary

Link plate

Introduction 1

Overview of Maintenance Parts

Figure 2 Pump head (Quaternary Pump, Flexible Pump)

A^c`eaViZ

DjiaZi[^aiZgVYVeiZg

DjiaZikVakZ

Eg^bVgnejbe]ZVY

=ZViZmX]Vc\ZgXVe^aaVgn

>caZikVakZ

HZXdcYVgnejbe]ZVY

1Introduction

Overview of Maintenance Parts

Maintenance Parts for Binary Pumps and High Speed Pumps

For a detailed overview of the internal pump head parts see sections below.

Maintenance Parts for Quaternary Pumps and Flexible Pumps

For a detailed overview of the internal pump head parts see sections below.

p/n Description

G4220-68741 1290 Binary Pump PM kit includes seal cap assemblies, PE piston

seals and PTFE frits

G4220-68742 Seal Wash PM kit for 1290 Binary Pumps includes film washers, PE

wash seals and a Peristaltic pump

p/n Description

G4204-68741 1290 Quaternary Pump PM kit includes seal cap assemblies, PE

piston seals and filter frits

G4204-68742 Seal Wash PM kit for 1290 Quaternary Pumps includes film

washers, PE wash seals and a Peristaltic pump

Altri manuali per 1290 infinity

Indice

Altri manuali Agilent Technologies Pompa dell'acqua

Agilent Technologies

Agilent Technologies 1100 Series Manuale utente

Agilent Technologies

Agilent Technologies 1260 Infinity Manuale utente

Agilent Technologies

Agilent Technologies X3502-64000 Manuale utente

Agilent Technologies

Agilent Technologies 1260 Infinity Quaternary LC VL Manuale utente

Agilent Technologies

Agilent Technologies TV 301SF Navigator Manuale utente

Agilent Technologies

Agilent Technologies VacIon Plus 40 Manuale utente

Agilent Technologies

Agilent Technologies TwisTorr 305 FS Series Manuale utente

Agilent Technologies

Agilent Technologies RV Series Manuale utente

Agilent Technologies

Agilent Technologies 1200 series Manuale utente

Agilent Technologies

Agilent Technologies 1200 series Manuale utente

Agilent Technologies

Agilent Technologies TriScroll 800 Manuale utente

Agilent Technologies

Agilent Technologies G6011B Manuale utente

Agilent Technologies

Agilent Technologies MS 120 Major Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies MS120 Manuale utente

Agilent Technologies

Agilent Technologies TPS-mini 9699180 Manuale utente

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manuale utente

Agilent Technologies

Agilent Technologies LC Series Manuale utente

Agilent Technologies

Agilent Technologies 1260 Infinity II Manuale utente

Agilent Technologies

Agilent Technologies TriScroll 800 Manuale utente

Agilent Technologies

Agilent Technologies TV-401/301 MS Manuale utente

Agilent Technologies

Agilent Technologies IDP-7 Manuale utente

Agilent Technologies

Agilent Technologies MS-301 Manuale utente

Agilent Technologies

Agilent Technologies X3500-64000 Manuale utente

Agilent Technologies

Agilent Technologies TriScroll 620 Series Manuale utente

Manuali Pompa dell'acqua popolari di altre marche

Neptun

Neptun NPHW 5500 Manuale utente

Sensidyne

Sensidyne Gilian BDX-II Istruzioni per l'installazione e il funzionamento

Draper

Draper 47808 Manuale utente

Trolla

Trolla 12820 Manuale utente

Sunfab

Sunfab SVH Series Manuale utente

WilTec

WilTec 50740 Manuale utente

Fieldmann

Fieldmann FVC 5015 EK Manuale utente

Everbilt

Everbilt EFSUB5-122HD Manuale utente

Graco

Graco Husky 3300e Manuale utente

esotec

esotec 101018 Manuale utente

moyno

moyno 2000 CC Manuale utente

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuale utente

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi

DUROMAX

DUROMAX XP WX Series Manuale utente

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuale utente

Franklin Electric

Franklin Electric IPS Manuale utente

Xylem

Xylem e-1532 Series Manuale utente

Milton Roy

Milton Roy PRIMEROYAL Manuale utente