APS IArmor Manuale utente

Questo manuale è adatto per i seguenti modelli

2

Altri manuali APS Accessori per automobili

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente

Rev. 20220201

1

iArmor®

Customer Support: [email protected]

iArmor® by APS PART#: IA-S097&S098

BEFORE INSTALLATION

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS

ARE PRESENT. READ INSTRUCTIONS CAREFULLY

BEFORE STARTING INSTALLATION. ASSISTANCE IS

RECOMMENDED. THANK YOU FOR CHOOSING OUR

PRODUCT!

*ROCKER PANEL MOUNT

*NO DRILLING / TRIMMING REQUIRED

Fastener Size Tightening Torque (ft-lbs) Required

6mm 6-7 X

8mm 16-18 √

10mm 31-32 X

12mm 56-58 X

14mm 92-94 X

Item QTY Description Item QTY Description

1# 2Driver/Passenger Front Mounting Brackets 6# 18 M8 Large Flat Washers

2# 4Driver/Passenger Center / Rear Mounting Brackets 7# 18 M8 Lock Washers

3# 6U Brackets 8# 6M8X1.25-55mm Carriage Bolts

4# 12 Spacers 9# 6 M8X1.25 Hex Nuts

5# 12 M8X1.25-30mm Hex Bolts

3 # 4 # 5 # 7# 8 # 9 #6 #

Rev. 20220201

2

iArmor®

Customer Support: [email protected]

Front PassengerDriver

1#

2#

1#

2#

2#2#

Rev. 20220201

3

iArmor®

Customer Support: [email protected]

STEP 1

Start the installation under the driver side of the vehicle. Deter-

mine Driver Side Front, Center and Rear Mounting Locations

(Figs 1 & 2).

The instruction here is for your reference only. We strongly

recommend the professional installer for best result. We are not

responsible for any damage caused by the installation.

(Fig 1) Driver Side Front Mounting Location

STEP 2

Attach the Driver Front Mounting Bracket to the body panel by

using (2) M8X1.25-30mm Hex Bolts, (2) M8 Large Flat Wash-

ers and (2) M8 lock washers. Don’t fully tighten at this time,

(Figs 3 & 4).

Remove Plastic Plugs (If

Equipped) Or Hex Bolts

From Threaded Holes

(Fig 2) Driver Side Center/Rear Mounting Location

Front

Front

(Fig 3) Driver Front Mounting Bracket Installation

(2) M8X1.25-30mm Hex Bolts

(2) M8 Lock Washers

(2) M8 Large Flat Washers

(Fig 4) Driver Front Mounting Bracket Installed

STEP 3

Repeat Step 2 to install the remaining driver side center and

rear mounting brackets (Fig 5).

Note: Driver/Passenger Center and Rear Mounting Brack-

ets are universal.

Front

Rev. 20220201

4

iArmor®

Customer Support: [email protected]

(Fig 5) Driver Center/Rear Mounting Bracket Installed

STEP 6

Move to the passenger side of the vehicle. Repeat Steps 1-5 to

install the passenger side step bar.

Installation completed.

STEP 5

Properly level and adjust the Step Bar and fully tighten all hard-

ware.

STEP 4

Once all (3) driver side mounting brackets are installed, select

and attach the Driver Side Step Bar onto the Mounting Brackets

with (3) U Brackets, (6) Spacers, (3) M8X1.25-55mm Carriage

Bolts, (3) M8 Large Flat Washers, (3) M8 Lock Washers and (3)

M8X1.25 Hex Nuts (Fig 6). Do not fully tighten hardware at this

time.

Attention

Do periodic inspections to the installation to make sure that all hardware is secure and tight.

In order to protect your bars/boards, please use only mild soap/non-abrasive products for cleaning.

NOTE: Torque all M8 X1.25-55mm Car-

riage Bolts to 16~18 Ibs-ft. Don't over

tighten, or the aluminum square bars

will be damaged by the brackets.

(Fig 6) Driver Side Step Bar Installation

Front

M8X1.25-55mm

Carriage Bolt

U Bracket

Spacers

M8 Large Flat Washer

M8 Lock washer

M8X1.25 Hex Nut