APS IBoard IB-R094 Manuale utente

Customer Support: info@iboardauto.com

Rev. 20211001

1

iBoard

®

iBoard® by APS PART#: IB-R094/R095/R952

READ INSTRUCTIONS CAREFULLY BEFORE START ING

INSTALLATION. REMOVE CONTENTS FROM BOX AND

VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS

RECOMMENDED.

*ROCKER PANEL MOUNT

*NO DRILLING REQUIRED

Item QTY Description Item QTY Description

1# 6Mounting Brackets 4# 12 M6 Large Flat Washers

2# 12 M8 Hex Flange Nuts 5# 12 M6 Nylon Lock Nuts

3# 12 M6X1-20mm Square Head Bolts

2 # 5 #

4 #

3 #

Fastener Size Tightening Torque (ft-lbs) Required

6mm 6-7 √

8mm 16-18 √

10mm 31-32 X

12mm 56-58 X

14mm 92-94 X

Customer Support: info@iboardauto.com

Rev. 20211001

2

iBoard

®

PassengerDriver Front

1# 1#

1#

1#

1#

1#

Customer Support: info@iboardauto.com

Rev. 20211001

3

iBoard

®

STEP 1

Start installation on the driver side of the vehicle. Locate the

driver side front bracket mounting location. Select (1) Mounting

Bracket, install with (2) M8 Hex Flange Nuts. Do not fully tight-

en hardware at this time.

STEP 2

Move to the Driver Side Center & Rear Mounting location. Re-

peat Step 1 to install the Driver Side Center & Rear Mounting

Bracket .

Note: (6) Mounting Brackets are universal.

STEP 3

Select a Running Board. Slip (3) M6x1-20mm Square Head

Bolts into each bottom channel (Fig 2). Carefully position the

Running Board onto the (3) Mounting Brackets.

IMPORTANT: Do not slide the Running Board on the Brackets

or the bottom surface of the board will be damaged. Attach the

Running Board to each Mounting Bracket with (2) M6x1-20mm

Square Head Bolts, (2) M6 Large Flat Washers and (2) M6

Nylon Lock Nuts (Fig 3). Do not fully tighten at this time.

(Fig 2) Slip M6X1-20mm Square Head Bolts Into The

Bottom Channels

M6X1-20mm Square Head Bolts

(Fig 1) Driver Side Front Mounting Bracket Installation

Front

Existing insert

In Body Panel

(Fig 3) Running Board Installed Onto Mounting Bracket

(2) M6X1-20mm Square Head Bolts

(2) M6 Large Flat Washers

(2) M6 Nylon Lock Nuts

(2) M8 Hex

Flange Nuts

Customer Support: info@iboardauto.com

Rev. 20211001

4

iBoard

®

STEP 4

Level and adjust the Running Board and fully tighten all hard-

ware.

Important: Please follow the recommended Tightening Tor-

ques shown in the table on page 1. Don’t over tighten, or

the nuts/bolts will be damaged.

STEP 5

Repeat Steps 1-4 for the other side Running Board installation.

The installation is completed .

Attention

Do periodic inspections to the installation to make

sure that all hardware is secure and tight.

In order to protect your bars/boards, please use only

mild soap/non-abrasive products for cleaning.

Questo manuale è adatto per i seguenti modelli

2

Indice

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente