APS IA06SJD4B Manuale utente

Indice

Altri manuali APS Accessori per automobili

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente

For 2004-2008 Ford F-150 SuperCrew Cab (Excl. 04 Heritage Edition)

REV: 20190401

Installation Instructions for IA06SJD4B

by APS Auto Parts Specialist Inc.

Application: For 2004-2008 Ford F-150 SuperCrew Cab (Excl. 04 Heritage Edition)

Estimated Time: 1 to 2 hours

The instruction here is for

your reference only. We

strongly recommend the

professional installer for best

result. We are not

responsible for any damage

caused by the installation.

Thank you for choosing our

product!

For 2004-2008 Ford F-150 SuperCrew Cab (Excl. 04 Heritage Edition)

REV: 20190401

Page 1 of 2

PARTS LIST:

Item

QTY

Description

Item

QTY

Description

#1

2

Driver/ Passenger Side Bar

#8

6

M8 Lock Washers

#2

3

Driver Front Mounting Bracket (DFM)

#9

6

2-Hole Support Bracket

#3

3

Passenger Front Mounting Bracket (PFM)

#10

6

M8X1.25 U-Clip Nuts

#4

6

M8X1.25-25 Hex Bolts

#11

6

M10X1.5-25 Hex Bolts

#5

12

M10X1.5-75 Carriage Bolts

#12

24

M10 Flat Washers

#6

2

ST6x25 Hex Flange Self Tapping Screw

#13

18

M10 Lock Washers

#7

6

M8 Flat Washers

#14

18

M10 Hex Nuts

PROCEDURE:

1. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE

STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.

2. Locate mounting locations as shown on Fig 1.

3. Install U-Clip nuts as shown (See Fig 2).

4. Attach mounting brackets as shown. Finger tighten(See Fig 3).

5. Select the Passenger Side Bar. Slip (2) M10X1.5-75 Carriage Bolts into each 2-Hole Support

Brackets ,and insert the 2-Hole support bracket into the Driver Side Bar.(Fig 4). Carefully

position the Bar onto the (3) Mounting Brackets. IMPORTANT: Do not slide the Bar on the

Brackets or damage to the finish may result. Attach the Driver Side Bar to the Mounting

Brackets with (2) M10 Hex Nuts,(2)M10 lock washers and (2)M10 flat washers, (Fig 5). Do not

tighten hardware.

6. Level and adjust the Bar properly and tighten all hardware. NOTE: Torque all M10 X1.5-75

Carriage Bolts to 22~25 Ib-ft. Don't over tighten,or the aluminum square bars will be

damaged by the brackets.

7. Repeat Step 2-6 for the other side installation.

8. Installation completed!!! (See Fig 6)

9. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

Products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect

the finish with a non-abrasive automotive wax, (e.g.Pure Carnauba ) on a regular basis. The use of any soap,

2-Hole Support Bracket

DFM

PFM

For 2004-2008 Ford F-150 SuperCrew Cab (Excl. 04 Heritage Edition)

REV: 20190401

Page 2 of 2

polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to

corrosion.

Driver/Passenger Side Installation Pictured

Fig 6

Complete Installation

Fig 4

Fig 5