Atdec Visidec Freestanding Double Manuale utente

Attach the Upright Pole to the Base Plate as shown

below. Ensure the Pin in the Base Plate lines up

with the hole in the

Pole Collar.

A Component Checklist - Check you have received all parts against the component checklist prior to installing

Installation Instructions

Upright Pole

Bits Bag

M8x50mm Screw

Cable Clip (x4)

5mm Allen

Key

Display Mounting

Screws

M4x16mm

(x8)

M4x12mm

(x8)

M4x10mm

(x8)

C Attach Horizontal Support’s

Extension Clips (x8)

M6x12mm Cap

Screw (x2)

2.5mm Allen

Key

Pole Collar

Donut

Clamps (x2)

Horizontal Support (x2)

Base Plate

Tighten “Donut” Hex screws firmly

and evenly.

DO NOT OVER TIGHTEN!

Position the Horizontal Supports at

the required height on the Upright

Pole. Ensure the Slots in all the Poles

are facing backwards.

Tighten supports using the

M6x12mm Cap Screws, M6 Donut

Inter-Screws and 5mm Allen Key

supplied. Take care to tighten clamp

firmly and evenly!

Upright Pole

Pole Collar

Base

Plate

B Attach Upright Pole to Base

TIGHTEN

FIRMLY

M8x50mm Screw

5mm Allen Key

M6x12mm

Cap Screw

(x2)

Slot in Poles to

face back

TIGHTEN

FIRMLY

Cable Balls (x6)

Locating

Hole

M6 Donut

Inter-Screw

(x2)

HOLD IN

PLACE

M6 Donut

Inter-Screw (x2)

Slot in Poles to

face back

F Adjust Ball Joint Mechanism

As LCD Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the mounting hole pattern does not comply with the international VESA

standards. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 08.12.06 ©

G Cable Management

D Attach Donut Clamps

1. Loosen both Donut Bolts evenly using the 5mm

Allen Key supplied.

2. Slide Donut Clamps over each Pole.

3. Adjust position of Donut Clamps to suit your

displays, then tighten screws firmly and evenly.

WARNING : DO NOT OVER TIGHTEN!

Tilt Ball Mechanism to access Donut Bolt.

Donut

Bolt

Donut

Bolt

E Mount Displays

Adjust the Ball Joint Mechanism to suit the weight of

your display. Tighten or loosen screws 1to 4evenly,

1/4 turn at a time.

LOOSEN

TIGHTEN

Extension

Clips (x4)

75mm

(3”)

75mm

(3“)

100mm

(4”)

100mm

(4”)

2.5mm Allen Key

LOOSEN

For Displays with 75mm x 75mm (3” x 3”) mounting

hole patterns.

USE

M4 x 10mm

screws

For Displays with 100mm x 100mm (4” x 4”) mounting hole

patterns.

USE

M4 x 12mm or

M4 x 16mm

Cable

Clip’s

(x4)

Cable

Balls (x6) Leave enough

slack in the

cables to allow

for movement.

Insert display cables into the slots in each

pole, using Cable Balls to hold them in place.

NOTE: When the slot in each pole cannot be

used, use the supplied Cable Clip’s to secure

the display/s cables.

Altri manuali Atdec Rack e supporto

Atdec

Atdec AWM-P G Manuale utente

Atdec

Atdec TH-PFK Manuale utente

Atdec

Atdec Spacedec Acrobat Swing Arm Double Manuale utente

Atdec

Atdec ADBS-3x1-30T3C Manuale utente

Atdec

Atdec AWM-W6 Manuale utente

Atdec

Atdec A F -AT-W Manuale utente

Atdec

Atdec AWM-A46 Manuale utente

Atdec

Atdec AWM-LR Manuale utente

Atdec

Atdec AF-MC Manuale utente

Atdec

Atdec ADBS-2x1-17TC Manuale utente

Atdec

Atdec AWMS-46W35 Manuale utente

Atdec

Atdec AWMS-2-BT75-G Manuale utente

Atdec

Atdec VFS-DH Manuale utente

Atdec

Atdec AWM-X40 Manuale utente

Atdec

Atdec AWM-W35 Manuale utente

Atdec

Atdec AWMS-BT40 Manuale utente

Atdec

Atdec AWM-A13 Manuale utente

Atdec

Atdec AWMS-2-LTH75-H Manuale utente

Atdec

Atdec AWMS-2-BT75-FS Manuale utente

Atdec

Atdec AD-TVC-70R Manuale utente

Atdec

Atdec SD-AT-DW Manuale utente

Atdec

Atdec SPACEDEC ACROBAT Istruzioni operative

Atdec

Atdec AWMS-DW6 Manuale utente

Atdec

Atdec AWMS-2-BT75-FS Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente