beevision 270 Manuale utente
2 BeeVision 270 User Manual v1.3.9
C Contents
1 Overview ......................................................................................................... 3
2 Installation ...................................................................................................... 3
3 Connection Ports ............................................................................................. 5
4 Turning ON/OFF .............................................................................................. 6
5 Field of View .................................................................................................... 7
Optical Center ....................................................................................................... 7
Field of View .......................................................................................................... 7
6 Communication Interfaces .............................................................................. 9
7 Volumizer ........................................................................................................ 9
8 Operation ...................................................................................................... 13
9 Technical Drawings ....................................................................................... 15
BeeVision 270 User Manual v1.3.9
3
1
1 Overview
This document provides a description of installation, calibration, and usage of
BeeVision
TM
270 dimensioner.
BeeVision dimensioners are equipped with Volumizer
TM
software that enables users
to easily self-calibrate the device, perform measurements and share results. Users can
use the BeeVision Dimensioners with Volumizer-GUI available on an attached monitor
or with Volumizer-WebUI from their browser on their PC, tablet or smart-phone.
With Volumizer-API, users can control their dimensioner remotely and integrate it
into their software infrastructure.
BeeVision dimensioners are designed as stand-alone devices. There is no need to have
a PC to get the results from BeeVision devices or install a separate software.
2
2 Installation
BeeVision 270 can be mounted over a stationary platform to measure static objects
as depicted in F
IGURE
1.
F
IGURE
1:
B
EE
V
ISION
S
TATIC
S
YSTEMS
4 BeeVision 270 User Manual v1.3.9
BeeVision 270 can be attached to any platform with 5mm screws depicted in FIGURE
2. BeeVision 270 is also delivered with a mounting-bracket that is screwed to the
device and can be used to easily mount the device to sigma-shaped profiles as shown
in FIGURE 3.
FIGURE 2: BEEVISION MOUNT BRACKET
FIGURE 3: BEEVISION 270 MOUNTED ON SIGMA PROFILES
BeeVision 270 User Manual v1.3.9
5
3 3 Connection Ports
F
IGURE
4 below shows the connection ports that are located on the backside of the
device.
F
IGURE
4:
B
ACK
S
IDE
O
F
B
EE
V
ISION
270
HDMI port: There are two HDMI ports to connect to an external monitor to view
Volumizer user interface (UI).
Even though it may work, it is not recommended to use a USB monitor
with the device.
Serial port (RS232): Typically used for establishing a connection with scales or
weighing instruments.
USB 3.0 port: There are two USB 3.0 ports. Zebra-brand barcode printers can be
also connected to ports. Handheld barcode scanners can be connected to USB
ports as well.
Ethernet port: To communicate with any computer or server system for the data
transfer.
Power port: To supply 12V to the device. Please use the adapter provided with
the BeeVision dimensioner.
Wireless antenna: Antenna performs data transfer by establishing wireless
communication with a wireless modem device/PC.
6
BeeVision 270 User Manual v1.3.9
Reset button: When pressed, the device is shut down gracefully. When pressed
for 3 seconds, device is forcefully shut down.
4
4 Turning ON/OFF
When the power cord is inserted into the power port and given mains voltage,
the device is automatically turned on and will be ready for use. The input mains
voltage for the power adapter provided with BeeVision dimensioners must be at
an interval between 100V-240V and 50Hz/60Hz.
To connect the BeeVision dimensioner to a computer or a local network for data
transfer, simply use an Ethernet cable. A detailed explanation of the connection
settings is provided in the Software Guide document.
In order to view the results of measurements and device settings on a monitor,
just connect one end of any standard HDMI male-to-male cable to the HDMI port
of the device and the other end to the monitor. If you use a touch-screen monitor,
connect the USB cable to one of the USB 3.0 ports on the device for enabling touch
operation. After connecting the cable for the first time, you may need to restart
the device depending on the driver of the touch-screen monitor. If you have
problems using the touch-screen, get in touch with the 3DTIM support team.
The mouse cursor is by default hidden in Volumizer UI. If you would like
to connect a mouse and a keyboard, you can enable/disable mouse
cursor with Ctrl+Shift+M combinations in your keyboard.
To turn off the device, simply unplug the power cord.
BeeVision starts in headless mode when no monitor is attached and the
device can only be controlled via Volumizer-WebUI or Volumizer API
web services. In order to bring up Volumizer GUI, connect a monitor and
reboot the device.
BeeVision 270 User Manual v1.3.9
7
5
5 Field of View
Optical Center
The optical center of the device is shown in F
IGURE
5
below. When mounting the
device, align it according to the optical center and center the projection of this
point on the measurement area.
F
IGURE
5:
O
PTICAL
C
ENTER OF
T
HE
B
EE
V
ISION
3DT270
Field of View
The field of view of BeeVision is 64x41 as illustrated in F
IGURE
6. There should
be at least 45 cm distance between the object and the device for proper
measurement operation.
8
BeeVision 270 User Manual v1.3.9
F
IGURE
6:
H
ORIZONTAL AND
V
ERTICAL
F
IELD OF
V
IEW
Measurement area of the BeeVision 270 dimensioner is set in the calibration
page. The measurement area should be in the field of view of the device. When
using a single device, some parts of irregular objects may remain out of sight of
the device as illustrated in F
IGURE
7. Only the surfaces that are visible to the device
are included in measurement calculations.
F
IGURE
7:
B
LIND
S
POT
I
LLUSTRATION
BeeVision 270 User Manual v1.3.9
9
6 6 Communication
Interfaces
Following communication interfaces are supported with BeeVision devices.
USB interface for connection of printer, barcode scanner or similar
Serial interface for connection of scale or data transfer to user computer
Ethernet interface for communicating over the internet or local network
to a central server of user
7 7 Volumizer
Volumizer is the software installed in the BeeVision dimensioners that enables users
to control the device, perform calibration and measurements. It has a graphical user
interface (GUI) that can be used when BeeVision is connected to a monitor. It also has
a web-based user interface (WebUI) that can be accessed from a browser with the
following address: http://IP_address_of_device .Google Chrome browser is officially
supported.
Users can navigate to pages from the main menu as shown in FIGURE 8 and FIGURE 9.
FIGURE 8: MAIN MENU OF VOLUMIZER GUI
10
BeeVision 270 User Manual v1.3.9
F
IGURE
9:
V
OLUMIZER
W
EB
UI
Following pages are included in Volumizer GUI and WebUI:
Brings up dimensioning submenu
Dimension
Measure
Trigger measurement and display
results
Calibration
Perform calibration and view 3D, 2D
and model data
Measurement
Settings
Change measurement settings
Indice
Altri manuali beevision Strumento di misura
