Benchmark 1280-000 Manuale utente

ELECTRONIC

ROTARY TOOL KIT

WEAR CSA APPROVED

EYE PROTECTION

WEAR EAR

PROTECTION

WEAR A

FACE MASK

5 year limited warranty on tool

PRODUCT SPECIFICATIONS

BENCHMARK 1.6 AMP ROTARY TOOL

Rating 120V, 60Hz, AC

Amperes 1.6 Amp

RPM 5,000–35,000 RPM (no load)

Chuck type 3-jaw

Chuck capacity 1/16" to 1/8"

Weight 5.1lb (2.3 kg)

NEED ASSISTANCE?

Call us on our toll- free customer support line:

1-866-349-8665 (Monday through Friday 9am – 5pm Eastern Standard Time)

• Technical questions

• Replacement parts

• Parts missing from package

1280-000

ELECTRONIC ROTARY TOOL KIT

TABLE OF CONTENTS

Product Speciﬁcations .................................................................................. 1

Table of Contents .......................................................................................... 2

General Safety Warnings ............................................................................ 3-5

Speciﬁc Safety Rules ..................................................................................... 6

Extension Cord Safety ................................................................................... 7

Symbols ........................................................................................................ 8

Know Your Rotary Tool.................................................................................... 9

Accessories ............................................................................................ 10-12

Assembly and Operating ......................................................................... 13-18

Installing Accessory Bits ............................................................................. 13

Removing the 3-jaw Chuck and Installing a Collet ................................... 13-14

Installing Accessory Bit when Using the Collet Nut System ........................... 14

Connecting the Flexible Shaft to the Tool ................................................ 14-15

Changing the Collet and Accessories in the Flexible Shaft ............................ 15

Installing the LED Worklight ......................................................................... 16

Replacing batteries in LED Worklight ...................................................... 16-17

ON/OFF Switch ........................................................................................... 17

Speed Control Wheel ................................................................................... 18

Selecting the Proper Speed ......................................................................... 18

Maintenance .......................................................................................... 19-20

Exploded View ............................................................................................ 21

Parts List ............................................................................................... 22-23

Warranty ..................................................................................................... 24

GENERAL SAFETY WARNINGS

WARNING:

Before using this tool or any of its accessories, read this manual and follow all Safety

Rules and Operating Instructions. The important precautions, safeguards and

instructions appearing in this manual are not meant to cover all possible situations.

It must be understood that common sense and caution are factors which cannot be

built into the product.

EYE, EAR & LUNG PROTECTION

SYMBOL MEANING

ALWAYS WEAR EYE PROTECTION THAT CONFORMS

WITH CSA Z94.3 or ANSI SAFETY STANDARD Z87.1

FLYING DEBRIS can cause permanent eye damage.

Prescription eyeglasses ARE NOT a replacement for proper eye protection.

Non-compliant eyewear can cause serious injury if broken

during the operation of a power tool.

Use hearing protection, particularly during extended periods

of operation of the tool, or if the operation is noisy.

WEAR A DUST MASK THAT IS DESIGNED TO BE

USED WHEN OPERATING A POWER TOOL IN A

DUSTY ENVIRONMENT.

Dust that is created by power sanding, sawing, grinding, drilling, and other

construction activities may contain chemicals that are known to cause cancer,

birth defects, or other genetic abnormalities. These chemicals include:

• Lead from lead-based paints

• Crystalline silica from bricks, cement, and other masonry products

• Arsenic and chromium from chemically treated lumber.

The level of risk from exposure to these chemicals varies, according to how

often this type of work is performed. In order to reduce exposure to these

chemicals, work in a well-ventilated area, and use approved safety equipment,

such as a dust mask that is speciﬁcally designed to ﬁlter out microscopic

particles.

ELECTRICAL SAFETY

WARNING:

To avoid electrical hazards, ﬁre hazards or damage to the tool, use proper circuit

protection.

This tool is wired at the factory for 120V AC operation. It must be connected to a

120V AC, 15 A circuit that is protected by a time-delayed fuse or circuit breaker.

To avoid shock or ﬁre, replace power cord immediately if it is worn, cut or damaged

in any way.

1280-000

ELECTRONIC ROTARY TOOL KIT

POWER TOOL SAFETY

WARNING:

Read all safety warnings and instructions. Failure to follow the warnings and

instructions may result in electric shock, ﬁre and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools create sparks which may ignite the

dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not

use any adapter plugs with earthed (grounded) power tools. Unmodiﬁed plugs and

matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor

use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a residual current

device (RCD) protected supply. Use of a ground fault circuit interrupter (GFCI)

reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the inﬂuence of

drugs, alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the OFF position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch or energizing power tools that

have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a

key left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught

in moving parts.

If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce

dust-related hazards.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was

designed.

that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage

damaged, have the power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

result in a hazardous situation.

Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not allow for safe handling and control of

the tool in unexpected situations.

SERVICE

Have your power tool serviced by a qualiﬁed repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

SAVE THESE INSTRUCTIONS FOR REFERENCE

1280-000

ELECTRONIC ROTARY TOOL KIT

SPECIFIC SAFETY RULES

WARNING:

Know your rotary tool. Do not plug the tool into the power source until you have

read and understand this Instruction Manual. Learn the tool’s applications and

limitations, as well as the speciﬁc potential hazards related to this tool. Following

this rule will reduce the risk of electric shock, ﬁre, or serious injury.

Always wear eye protection. Any power tool can throw foreign objects

into your eyes and cause permanent eye damage.

ALWAYS wear safety goggles (not glasses) that comply with ANSI safety standard

Z87.1. Everyday glasses have only impact resistant lenses. They ARE NOT safety

glasses.

WARNING: Glasses or goggles not in compliance with ANSI Z87.1 could

cause serious injury when they break.

Hold tool by insulated gripping surfaces when performing an operation where the

cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will

make exposed metal parts of the tool “live” and shock the operator.

Always make sure the work surface is free from nails and other foreign objects.

Cutting into a nail can cause the bit and the tool to jump and damage the bit.

Never hold the workpiece in one hand and the tool in the other hand when in use.

Never place the hands near or below the cutting surface. Clamping the material and

guiding the tool with both hands is much safer.

Never lay workpiece on hard surfaces like concrete, stone, etc. Protruding cutting

bit may cause the tool to jump.

Always wear safety goggles and dust mask. Use only in well-ventilated area. Using

personal safety devices and working in a safe environment reduces risk of injury.

After changing the bits and accessories or making adjustments, make sure

the collet nut and any other adjustment devices are securely tightened. Loose

adjustment devices will be violently thrown.

Always use the correct collet size. If the collet size is larger than the accessory

shank size it will not grip the shank properly, leading to possible injury to the

operator or damage to the tool.

each use. Damaged accessories can break during use and cause serious injury.

Never use dull or damaged bits. Sharp bits must be handled with care. Damaged

bits can snap during use. Dull bits require more force to push the tool, possibly

causing the bit to break.

Never touch the bit during or immediately after use. After use the bit is too hot to be

touched by bare hands.

EXTENSION CORD SAFETY

WARNING:

Keep the extension cord clear of the working area. Position the cord so it will not get

caught on the workpiece, tools or any other obstructions while you are working with

the power tool.

Make sure any extension cord used with this tool is in good condition. When using

an extension cord, be sure to use one of heavy enough gauge to carry the current

the tool will draw. An undersized cord will cause a drop in line voltage resulting in

loss of power and overheating.

The table at below shows the correct size to use according to cord length and

nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the

gauge number the heavier the cord.

Be sure your extension cord is properly wired and in good condition. Always replace

a damaged extension cord or have it repaired by a qualiﬁed electrician before using

it. Protect your extension cord from sharp objects, excessive heat and damp or wet

areas.

Use a separate electrical circuit for your power tools. This circuit must not be less

than 14 gauge wire and should be protected with either a 15 AMP time delayed fuse

or circuit breaker. Before connecting the power tool to the power source, make sure

the switch is in the OFF position and the power source is the same as indicated on

the nameplate. Running at lower voltage will damage the motor.

MINIMUM GAUGE (AWG)

EXTENSION CORDS (120V USE ONLY)

Amperage Rating Total Length

More than Not more

than

25'

(7.5 m)

50'

(15 m)

100'

(7.5 m)

150'

(7.5) m

0 6 18 16 16 14

6 10 18 16 14 12

10 12 16 16 14 12

12 16 14 12 Not Applicable

1280-000

ELECTRONIC ROTARY TOOL KIT

SYMBOLS

WARNING: Some of the following symbols may appear on the ROTARY TOOL . Study

these symbols and learn their meaning. Proper interpretation of these symbols will allow

V Volts n

Three-phase alternating

current with neutral

A Amperes Read all safety warnings and

instructions

Hz Hertz Direct current

W Watts noNo load speed

kW Kilowatts Alternating or direct current

Microfarads Class II construction

L Liters Splash-proof construction

kg Kilograms Watertight construction

H Hours Protective grounding at

terminal, Class I tools

N/cm² Newtons per square

centimetre .../min Revolutions or reciprocations

per minute

Pa Pascals Diameter

OPM Oscillation per minute 0

Min Minutes Directional arrow

S Seconds Warning symbol

~or AC Alternating current Wear safety glasses, hearing

protection and dust mask

Three-phase alternating

current

This symbol designates that this tool is listed with U.S.

requirements by TÜV Rheinland. Conforms to UL60745-1,

UL60745-2-23.

Certiﬁed to CAN/CSA-C22.2 No.60745-1, CAN/CSA-C22.2

No.60745-2-23.

KNOW YOUR ROTARY TOOL

Umbrella nut

110 pc

Accessory kit

Collet nut

3-Jaw chuck

LED work light

Air vents

Hanging loop

Speed control

Motor brush

cap

ON/OFF

switch

Spindle lock

button

Flexible shaft

Table clamp

& hanger

1/8", 3/32",

1/16" Collets

Collet wrench

Indice

Altri manuali Benchmark Utensili

Benchmark

Benchmark 1280-002 Manuale utente

Manuali Utensili popolari di altre marche

Martor

Martor SECUNORM 175 Manuale utente

ERKCO

ERKCO 1000 Manuale utente

jbc

jbc N4473 Manuale utente

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuale utente

Worx Professional

Worx Professional Sonicrafter WU676 Manuale utente

Gage Bilt

Gage Bilt GB713SH Manuale utente

Hilti

Hilti DX 9-ENP Manuale utente

norbar

norbar NORTRONIC 34399 Manuale utente

BGS technic

BGS technic 8578 Manuale utente

Makita

Makita DHR241 Manuale utente

Motor Guard

Motor Guard JMB-1250 Manuale utente

Power Adhesives

Power Adhesives 805-12 Manuale utente

Clemco

Clemco 24189 Manuale utente

VVG

VVG VNG 903 Series Manuale utente

Hilti

Hilti FX 3-A Manuale utente

Grizzly

Grizzly H6472 Manuale utente

axing

axing BWZ 5-02 Manuale utente

Dh-Robotics

Dh-Robotics RGI-100 Come usare