Bordeaux BEWC-66 Manuale utente

96 Can + 33 Bottle

Dual Zone Wine Cooler

Built-in or Free Standing

Operation and Storage Manual

Model: BEWC-66

Contents

1 Features 2

2 Before First Use 2

3 Important Safety Measures and Instructions 3

4 Warnings and Cautions 4

5 Installation 7

6 Before Initial Operation 8

7 Device Overview 9

8 Operation 10

9 Temperature Setting 11

10 Helpful Hints/Energy Saving 11

11 Cleaning and Maintenance 12

12 How to Move the Appliance 13

13 How to Move the Shelves 13

14 Cabinet Dimensions 14

15 Electrical Circuit Diagram 14

16 Troubleshooting 15

17 Warranty Statement 17

18 Decommissioning 18

19 Technical Speciﬁcations 19

96 Can + 33 Bottle Dual Zone Wine Cooler

Thank you for choosing a Bordeaux Wine Cooler. If operated and taken care

of properly and in accordance with these instructions, this appliance will be

useful for many years.

1 Features

• Dual zone for up to 96 cans

and 33 bottles*

• Temperature range:

Right zone (wine) 5–18°C

Left zone (cans) 3–10°C

• Built-in or free-standing installation

• Blue LED interior light with switch

• Tempered glass door

*Based on standard shape 0.75 litre bottles.

**Extra Beechwood shelves available should you wish to store wine bottles

in both cabinets.

2Before First Use

• Before first use, remove any stickers or similar from the appliance except for

the rating label.

• Dispose of plastic bags as they pose a risk of suffocation to young children.

Please read this manual before operating the appliance and keep it in a safe

place for future reference. If this appliance is transferred to a new owner, the

manual should also be provided. Ignoring the following safety instructions may

endanger your health and life.

• Stainless steel door

frame and handle

• No frost interior with

fan circulating

• Energy efficient design

• 100% HFC free and CFC free

• Security lock system

• Beechwood shelves**

3 Important Safety Measures and Instructions

• Before operating the wine cooler, check that the voltage indicated on the

appliance’s technical plate corresponds to the voltage of the electricity

supplied to your home.

• Check the electrical connections that will be used to run the wine cooler.

Make sure all wires and connections to the appliance work properly and

that they are not time-worn. Check that the technical requirements match

that of the appliance. A check of existing and new connections should be

undertaken by an authorised professional. Modifications to the electrical

mains to enable the installation of the appliance must be performed by a

qualified professional.

• This appliance is intended for private domestic use only.

• This appliance is for indoor use only.

• This appliance is not intended to be operated for commercial purposes,

whilst camping or during transport.

• Operate the appliance in accordance with its intended use only.

• Do not allow anyone who is not familiar with this instruction manual to

operate the appliance.

• This appliance may be operated by children aged from 8 years and above

as well as by persons with reduced physical, sensory and mental capabilities

or lack of experience and knowledge if they are supervised or have been

instructed concerning the safe use of the appliance and comprehend the

hazards involved. Children must not play with the appliance. Cleaning

and user maintenance must not be carried out by children unless they are

supervised.

4 Warnings and Cautions

• Do not connect to the mains if the appliance itself or the power cord or the

plug are visibly damaged.

• Never try to repair the appliance yourself. If the appliance does not operate

properly, please contact the retailer. Use original spare parts only.

• If the power cord becomes damaged it must be replaced

by the manufacturer or a qualified electrician.

• This appliance is equipped with the environmentally friendly refrigerant

R600a. The refrigerant R600a is inflammable. The components of the

cooling circuit must not be damaged during transport or use.

• If any part of the cooling circuit is damaged, the appliance must not stand

near a fire, naked light or spark-generating devices. Immediately contact the

retailer if under warranty or customer support

• If gas is set free in your home:

1. Open all windows.

2. Do not unplug the appliance and do not use the control panel or

thermostat.

3. Do not touch the appliance until the gas has dissipated as sparks may be

generated that could ignite the gas.

• When disposing of or decommissioning the appliance, keep all components

away from fire or other sources of ignition.

• Do not install the appliance near volatile or combustible materials

(e.g. gas, fuel, alcohol, paints) or in rooms which may have poor air

circulation (e.g. garage).

EXPLOSION HAZARD

Do not store any explosive materials or sprays that contain flammable

propellants in the appliance.

• Do not connect the appliance to the electric supply unless all packaging and

transit protectors have been removed.

• Operate the appliance with 220–240V AC/50Hz only. All connections and

energy-leading components must be replaced by an authorised professional.

• Do not use an extention cord or a multi-socket when connecting the

appliance to the mains.

• A dedicated and properly grounded socket meeting the data of the plug is

required to minimise any kind of hazard. The appliance must be grounded

properly.

• Check that the power cord is not placed under the appliance or damaged

when moving the appliance.

• The technical data of your energy supplier must meet the data on the model

plate of the appliance.

• Your domestic circuit must be equipped with an automatic circuit breaker.

• Do not modify the appliance.

RISK OF ELECTRIC SHOCK

Turn off the power before you install the appliance and before you connect

it to the mains. Do not use a steam cleaner to clean or defrost the appliance.

The steam can make contact with the electrical parts and cause an electrical

short. Never use mechanical devices, knives or other sharp-edged items to

remove encrusted ice from inside the appliance.

• Disconnect the appliance from the mains before undertaking cleaning or

maintenance.

• Do not use electrical appliances inside the wine cooler.

• Do not place heat-radiating appliances on the wine cooler.

• Do not install the appliance in a place where it may come in contact with

water/rain, as the insulation of the electrical system will be damaged.

• Do not put a kettle or objects containing water e.g. a vase on top of the wine

cooler as spilled water can seriously damage the appliance.

• Children must never play with the appliance.

• If you decommission the wine cooler (even temporarily), ensure that children

cannot access the appliance interior.

• The condenser and the compressor, located at the rear of the appliance, can

reach high temperatures during ordinary operation. Carry out installation

according to this manual. Insufficient ventilation of the wine cooler will

impair its operation and will damage the appliance. Do not cover or block the

ventilation slats at any time.

• Do not touch the extremely cooled surfaces with wet or damp hands; skin

may stick to these surfaces.

• When you move the appliance, hold it at its base and lift it carefully. Keep

the appliance in an upright position.

• Do not tilt the appliance more than 45°.

• If the appliance is transported in a horizontal position, oil may flow from the

compressor into the refrigerant circuit.

• Leave the appliance in an upright position for 4–6 hours before you switch it

on to ensure that the oil has flowed back into the compressor.

• Never use the door for moving the appliance as you will damage the hinges.

• Do not operate the appliance unless all components are installed properly.

• Do not stand or lean on the base, the drawers, the doors etc of the

appliance.

• Do not put hot liquids or hot foodstuff into the appliance.

• The air vents of the appliance or its built-in structure (if the appliance is

suitable for being built-in) must be completely open, unblocked and free of

any kind of dirt.

5 Installation

• Unpack the appliance carefully. Dispose of the packaging.

• Packaging may include a rubber wedge that comes inserted into the gap in

the door. This is there to prevent the door from dropping during transit. Keep

this wedge with the user manual in case you move the wine cooler again in

the future.

• Included inside the cooler is a small white plastic tray. In cases where the

inside of the cooler is too dry and you wish to increase the humidity, fill the

tray with water and then position inside the cooler where it won’t be knocked

over. Refill as needed.

• The appliance and its accessories may have been protected from damage

during transport by the use of adhesive tape etc. After removal, tape residue

may be removed using lukewarm water, mild detergent, and a damp cloth

(see chapter Cleaning and Maintenance). Never remove any labels from the

back of the appliance.

• Install the appliance in a suitable position with an adequate distance from

sources of heat and cold.

• Check that the appliance and the power cord are not damaged.

• Install the appliance in a dry and well-ventilated place.

• Protect the appliance from direct sunlight.

• The doors must open completely and without hindrance.

• Install the appliance on a level, dry and solid floor.

• Connect the appliance to the mains properly.

• To allow air circulation, maintain a gap between the walls and the bottles.

• Do not overcrowd the wine cooler.

• Distribute wine bottles evenly throughout the wine cooler - avoid grouping

together.

• The wooden shelves may be moved or removed to accommodate non-

standard bottles.

• Do not obstruct fans.

• Do not move the wine cooler if it contains bottles.

• Do not pull out more than one loaded shelf at a time as this may cause the

wine cooler to tilt forward.

6 Before Initial Operation

• Leave the appliance in an upright position for 4–6 hours before you connect

it to the mains.

• Clean the appliance thoroughly. Be very careful, especially inside the

appliance (see chapter Cleaning and Maintenance).

• The appliance must be connected to the mains properly.

• Allow the appliance to stabilise the temperature for approximately 24 hours

before use.

• Do not overfill the appliance.

Altri manuali per BEWC-66

Indice

Altri manuali Bordeaux Elettrodomestico da cucina

Bordeaux

Bordeaux BEWC-46 Manuale utente

Bordeaux

Bordeaux BEWC-171 Manuale utente

Bordeaux

Bordeaux BEWC-171 Manuale utente

Bordeaux

Bordeaux BEWC-66 Manuale utente

Bordeaux

Bordeaux BE0270WC-166 Manuale utente

Bordeaux

Bordeaux BEWC-52 Manuale utente

Manuali Elettrodomestico da cucina popolari di altre marche

Tayama

Tayama TYG-35AF Manuale utente

AEG

AEG 43172V-MN Manuale utente

REBER

REBER Professional 40 Guida utente

North American

North American BB12482G / TR-F-04-B-NCT-1 Manuale utente

Presto

Presto fountain popper Manuale utente

Westmark

Westmark 1035 2260 Manuale utente

Zanussi

Zanussi ZCG64396XA Manuale utente

HOFFEN

HOFFEN SM-9302M Manuale utente

Philips

Philips HD3133 Manuale utente

Ronco

Ronco Beef Jerky Manuale utente

Hendi

Hendi 470411 Manuale utente

Livoo

Livoo MEN386 Manuale utente

Vogue

Vogue D446 Manuale utente

croydon

croydon WR-10313-700 Manuale utente

ADE

ADE AUTOMATIC-L Manuale utente

Chefman

Chefman RJ43-SQ Series Manuale utente

Vacmaster

Vacmaster VP680 Manuale utente

Jetmaster

Jetmaster 900HG Manuale utente