Bordeaux BEWC-66 Manuale utente
100 Can + 33 Bottle
Dual Zone Wine Cooler
Built-in & Free Standing
Operation and Storage Manual
Model: BEWC-66
Contents
1 Features 1
2 Before First Use 1
3 Important Safety Measures and Instructions 2
4 Warnings and Cautions 3
5 Installation 6
6 Device Overview 7
7 Before Initial Operation 8
8 Temperature Setting 8
9 Operation 8
10 Helpful Hints/Energy Saving 9
11 Cleaning & Maintenance 9
12 How to Move the Appliance 10
13 How to Move the Shelves 11
14 Cabinet Dimensions 11
15 Trouble Shooting 12
16 Decommission 13
17 Electrical Circuit Diagram 13
18 Specifications 14
1
100 Can + 33 Bottle Dual Zone Wine Cooler
Thank you for choosing a Bordeaux Wine Cooler. If operated and taken care
of properly in accordance with these instructions, this appliance will be useful
for many years.
1 Features
• Dual zone for 100 cans and 33 bottles
• Temperature range:
Right zone (wine) 5–18°C
Left zone (cans) 3–10°C
• Built-in & free-standing installation
• Blue LED interior light with switch
• Tempered glass door
• Stainless steel door frame and handle
2 Before First Use
• Before first use, remove any stickers or similar from the appliance except for
the rating label.
• Dispose of any plastic bags as they pose a risk of suffocation to young
children.
Please read this manual before operating the appliance and keep it in a safe
place for future reference. If this appliance is transferred to a new owner, the
manual should also be provided to the new owner. If you ignore the safety
instructions, you will endanger your health and life.
• No frost with interior fan circulating
• Energy efficient design
• 100% HFC free and CFC free
• Security lock system
• Beech wood shelves
2
3 Important Safety Measures and Instructions
• Before operating the appliance, check if the voltage indicated on the
appliance’s technical plate corresponds to the voltage of the electricity
supplied to your home.
• Check the technical periphery of the appliance. Do all wires and connections
to the appliance work properly? Or are they time-worn and do not match
the technical requirements of the appliance? A check-up of existing and
newly made connections must be done by an authorized professional. All
connections and energy-leading components (incl. wires inside a wall) must
be checked by a qualified professional. All modifications to the electrical
mains to enable the installation of the appliance must be performed by a
qualified professional.
• This appliance is intended for private use only.
• This appliance is intended for cooling wine in a private household only.
• This appliance is for indoor use only.
• This appliance is not intended to be operated for commercial purposes,
during camping or in public transport.
• Operate the appliance in accordance with its intended use only.
• Do not allow anybody who is not familiar with this instruction manual to
operate the appliance.
• This appliance may be operated by children aged from 8 years and above
as well as by persons with reduced physical, sensory and mental capabilities
or lack of experience and knowledge if they are supervised or have been
instructed concerning the safe use of the appliance and do comprehend
the hazards involved. Children must not play with the appliance. Cleaning
and user maintenance must not be carried out by children unless they are
supervised.
3
4 Warnings and Cautions
• Do not connect the appliance to the mains if the appliance itself or the
power cord or the plug are visibly damaged.
• Never try to repair the appliance yourself. If the appliance does not operate
properly, please contact the shop you purchased the appliance at. Original
spare parts should be used only.
• When the power cord is damaged, it must be replaced by the manufacturer
or an authorized after sales service or a qualified professional only.
• This appliance is equipped with the environmentally friendly refrigerant
R600a. The refrigerant R600a is inflammable. The components of the
cooling circuit must not be damaged during transport or use.
• If any part of the cooling circuit is damaged, the appliance must not stand
near a fire, naked light or spark-generating devices. Contact the shop you
purchased the appliance at immediately.
• If gas is set free in your home:
1. Open all windows.
2. Do not unplug the appliance and do not use the control panel or
thermostat.
3. Do not touch the appliance until all the gas has gone, otherwise sparks can
be generated which will ignite the gas.
• Keep all components of the appliance away from fire and other sources of
ignition when you dispose of or decommission the appliance.
• Do not install the appliance near volatile or combustible materials (e.g. gas,
fuel, alcohol, paints) or in rooms which may have poor air circulation (e.g.
garage).
EXPLOSION HAZARD
Do not store any explosive materials or sprays that contain flammable
propellants in your appliance.
• Do not connect the appliance to the electric supply unless all packaging and
transit protectors have been removed.
4
• Operate the appliance with 220–240V AC/50Hz only. All connections and
energy-leading components must be replaced by an authorized professional.
• Do not use a socket board or a multi socket when connecting the appliance
to the mains.
• A dedicated and properly grounded socket meeting the data of the plug is
required to minimize any kind of hazard. The appliance must be grounded
properly.
• Check that the power cord is not placed under the appliance or damaged
when moving the appliance.
• The technical data of your energy supplier must meet the data on the model
plate of the appliance.
• Your domestic circuit must be equipped with an automatic circuit breaker.
• Do not modify the appliance.
RISK OF ELECTRIC SHOCK
Turn off the power before you install the appliance and before you connect
it to the mains. Do not use any steam cleaners to clean or defrost the
appliance. The steam can get into contact with the electrical parts and cause
an electrical short. Never use mechanical devices, knives or other sharp-
edged items to remove encrusted ice inside the appliance.
• Disconnect the appliance from the mains before you clean or maintain it.
• Do not use any electric appliances inside the food storage compartments of
your appliance unless they are recommended by the manufacturer of your
refrigerator.
• Do not put any heat-radiating appliances onto your appliance.
• Do not install the appliance in a place where it may come in contact with
water/rain, otherwise the insulation of the electrical system will be damaged.
• Do not put a water-boiler or vases onto your appliance. The electrical
components of your appliance can be seriously damaged by water over-
boiling or spilled water.
5
• Children must never play with the appliance.
• If you decommission your appliance (even temporarily), ensure that children
cannot get into the appliance.
• The condenser and the compressor, located at the rear of the appliance, can
reach high temperatures during ordinary operation. Carry out the installation
according to this manual. Insufficient ventilation of the appliance will impair
its operation and will damage the appliance. Do not cover or block the
ventilation slats at any time.
• Do not touch the extremely cooled surfaces with wet or damp hands,
because your skin may stick on these surfaces.
• When you move the appliance, hold it at its base and lift it carefully. Keep
the appliance in an upright position.
• Do not tilt the appliance more than 45°.
• If the appliance is transported in a horizontal position, some oil may flow
from the compressor into the refrigerant circuit.
• Leave the appliance in an upright position for 4–6 hours before you switch it
on to ensure that the oil has flowed back into the compressor.
• Never use the door for moving the appliance as you will damage the hinges.
• Do not operate the appliance unless all components are installed properly.
• Do not stand or lean on the base, the drawers, the doors etc of the
appliance.
• Do not put hot liquids or hot foodstuff into the appliance.
• The air vents of the appliance or its built-in structure (if the appliance is
suitable for being built-in) must be completely open, unblocked and free of
any kind of dirt.
6
5 Installation
• Unpack the appliance carefully. Dispose of the packaging.
• The accessories of your appliance can be protected from damage due
to transportation (adhesive tape etc.). Remove such tape very carefully.
Remove remains of such tape with a damp cloth using lukewarm water and a
mild detergent (see chapter Cleaning and Maintenance). Never remove any
components from the back of the appliance.
• Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
• Check that the appliance and the power cord are not damaged.
• Install the appliance in a dry and well-ventilated place.
• Protect the appliance from direct sunlight.
• The doors must open completely and without hindrance.
• Install the appliance on a level, dry, solid floor.
• Connect the appliance to the mains properly.
• The nameplate is situated inside the appliance or at the back.
7
6 Device Overview
1Light Switch (°C/F°)
2Temperature Setting
3Temperature Display
4Temperature Setting
5Upper Hinge
6C°/F° Switch
7Fan
8Light
9Exhaust Window
10 Handle
11 Glass
12 Door Seal
13 NTC Point
14 Shelf
15 Carbon Filter
16 Lock
17 Exhaust Window
18 Foot
19 Light Switch
20 Lock Support
21 Light Switch
22 Temperature Setting
23 Temperature Display
24 Temperature Setting
25 Upper Hinge
26 Fan
27 Light
28 Handle
29 Glass
30 Door Seal
31 Lock
32 Light Switch
8
7 Before Initial Operation
• Leave the appliance in an upright position for 4–6 hours before you connect
it to the mains.
• Clean the appliance thoroughly. Be very careful, especially inside the
appliance (see chapter Cleaning and Maintenance).
• The appliance must be connected to the mains properly.
• Allow the appliance to stabilize the temperature for approx. 24 h before use.
• Do not overfill the appliance.
8 Temperature Setting
• Set the temperature using the and buttons by 1° within a range of
3–10°C (38–50°F) for the left, or 10–18°C (50–66°F) for the right.
• Press the POWER button for 3 seconds to turn the unit on or off.
• Switch on/off the internal light using the LIGHT button.
• To switch the temprature display from Celsius degrees to be Fahrenheit
degrees or vice versa, press and hold LIGHT for 3 seconds.
• To shut down the inner light and control panel display light, press and hold
both UP and DOWN buttons for 3 seconds. (the device will keep running
normally). Repress and hold both buttons for 3 seconds for the device to
restore itself to it’s normal status.
• Flashing LED = Temprature setting mode
• Constant flashing LED = Cooling Temprature
Altri manuali per BEWC-66
1
Indice
Altri manuali Bordeaux Elettrodomestico da cucina
