Cisco WAN Interface Cards Cable WIC-1B-U Manuale utente
Table of Contents
WIC−1B−S/T and WIC−1B−U WAN Interface Cards Cable Specifications................................................1
Document ID: 46796................................................................................................................................1
Introduction..........................................................................................................................................................1
Prerequisites.........................................................................................................................................................1
Requirements..........................................................................................................................................1
Components Used...................................................................................................................................1
Conventions............................................................................................................................................1
WIC−1B−S/T Interface Card...............................................................................................................................1
Cables......................................................................................................................................................2
ISDN BRI S/T Port Pinouts....................................................................................................................2
BRI S/T WAN Interface Card LEDs......................................................................................................2
WIC−1B−U WAN Interface Card.......................................................................................................................3
ISDN BRI U Port Pinouts (RJ−45).........................................................................................................3
ISDN BRI U WAN Interface Card LEDs...............................................................................................3
ISDN BRI Cable Specifications..............................................................................................................3
Related Information.............................................................................................................................................4
Cisco − WIC−1B−S/T and WIC−1B−U WAN Interface Cards Cable Specifications
i
WIC−1B−S/T and WIC−1B−U WAN Interface Cards
Cable Specifications
Document ID: 46796
Introduction
Prerequisites
Requirements
Components Used
Conventions
WIC−1B−S/T Interface Card
Cables
ISDN BRI S/T Port Pinouts
BRI S/T WAN Interface Card LEDs
WIC−1B−U WAN Interface Card
ISDN BRI U Port Pinouts (RJ−45)
ISDN BRI U WAN Interface Card LEDs
ISDN BRI Cable Specifications
Related Information
Introduction
This document provides the technical specifications and cable requirements for the WIC−1B−S/T and
WIC−1B−U WAN interface cards.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
WIC−1B−S/T Interface Card
Cisco − WIC−1B−S/T and WIC−1B−U WAN Interface Cards Cable Specifications
The Integrated Services Digital Network (ISDN) Basic Rate Interface (BRI) WAN interface cards are shared
between the Cisco 1600, 1720, 2600 and 3600 Series Routers. Each card supports a single ISDN BRI port
offered with and without the NT1 interface.
The S/T WAN interface card module (WIC−1B−S/T) needs the external Network Termination 1 (NT1) device
whereas the U WAN interface card module (WIC−1B−U) has an internal NT1 device.
Cables
The WIC−1B−S/T interface card requires RJ−45 to RJ−45 straight−through cables (provided by the
customer).
ISDN BRI S/T Port Pinouts
The table below shows the ISDN BRI S/T port pinouts (RJ−45).
8 Pin1TE2NT3Polarity
3Transmit Receive +
4Receive Transmit +
5Receive Transmit −
6Transmit Receive −
1Pins 1, 2, 7, and 8 are not used.
2TE refers to terminal terminating Layer 1 aspects of TE1, TA, and NT functional groups. This applies to the
Cisco 1603 and the ISDN BRI S/T WAN interface card.
3NT refers to network terminating Layer 1 aspects of NT1 and NT2 functional groups. This applies to the
Cisco 1604 ISDN S/T port.
BRI S/T WAN Interface Card LEDs
The table below lists the BRI S/T WAN interface card LEDs and their meaning.
LED Meaning
B1 Active connection on B1 channel
B2 Active connection on B2 channel
OK ISDN port has established a connection with the central
office switch
Cisco − WIC−1B−S/T and WIC−1B−U WAN Interface Cards Cable Specifications
WIC−1B−U WAN Interface Card
ISDN BRI U Port Pinouts (RJ−45)
The table below lists the ISDN BRI U port pinouts and their function.
8 Pin1Function
3No connection
4Signal −− Tip or Ring
5Signal −− Tip or Ring
6No connection
1Pins 1, 2, 7, and 8 are not used.
ISDN BRI U WAN Interface Card LEDs
The table below lists the ISDN BRI U WAN interface card LEDs and their meaning.
LED Meaning
B1 Active connection on B1 channel
B2 Active connection on B2 channel
NT1 NT1 has established a connection with the central office
switch
ISDN BRI Cable Specifications
The table below lists the ISDN BRI cable specifications.
Specification High−capacitance
Cable Low−Capacitance
Cable
Resistance (at 96
kHz) 160 ohms/km 160 ohms/km
Capacitance (at 1
kHz) 120 nF1/km 30 nF/km
Impedance (96
kHz) 75 ohms 150 ohms
Wire diameter 0.024" (0.6 mm) 0.024" (0.6 mm)
Distance 32.8' (10 m) 32.8' (10 m)
Cisco − WIC−1B−S/T and WIC−1B−U WAN Interface Cards Cable Specifications
limitation
1nF = nanoFarad
Related Information
Understanding the 1−Port ISDN BRI (S/T) WAN Interface Card (WIC−1B−S/T or
WIC36−1B−S/T)
•
Technical Support − Cisco Systems•
All contents are Copyright © 1992−2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Updated: Jun 27, 2005 Document ID: 46796
Cisco − WIC−1B−S/T and WIC−1B−U WAN Interface Cards Cable Specifications
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Cisco Scheda di rete
Cisco
Cisco LINKSYS PLTS200 Manuale utente
Cisco
Cisco 7304 Series Istruzioni operative e di manutenzione
Cisco
Cisco Linksys WUSB54G Manuale utente
Cisco
Cisco CompactFlash Adapter Manuale utente
Cisco
Cisco uBR10-SRP-OC12SML Manuale utente
Cisco
Cisco WAN Interface Card WIC-1DSU-56K4 Manuale utente
Cisco
Cisco Media Gateway Controller Node Manager Manuale utente
Cisco
Cisco ONS 15454 Series Manuale utente
Cisco
Cisco MC16E Manuale utente
Cisco
Cisco Catalyst 4500 Dimensioni
Cisco
Cisco Linksys WMA11B Manuale utente
Cisco
Cisco Valet Connector AM10 Manuale utente
Cisco
Cisco NPE-175 Manuale dell'operatore
Cisco
Cisco Gateway Controllers Istruzioni originali
Cisco
Cisco Linksys USB200M Manuale utente
Cisco
Cisco IDTA153 Manuale utente
Cisco
Cisco EHWIC 1 GE-SFP-CU Manuale utente
Cisco
Cisco 7300-6T3 Manuale dell'operatore
Cisco
Cisco Linksys WUSB600N Manuale utente
Cisco
Cisco HWIC-1FE - WAN Interface Card Expansion... Manuale di istruzioni
Manuali Scheda di rete popolari di altre marche
3Com
3Com EtherLink 3C509B Manuale utente
TRENDnet
TRENDnet TEG-PCITX Manuale utente
Delta Electronics
Delta Electronics Braking Modules VFDB Series Manuale utente
TwinMOS
TwinMOS Booming Manuale utente
Dialogic
Dialogic Media Board DM/V1200BTEPEQ Manuale utente
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manuale utente
