CoolGear USBG-7DU2 Manuale utente

Metal 7-Port USB 2.0 Hub

– Din RAIL Mounting

Japan NEC Chip

Product Manual

Coolgear, Inc.

Version 1.1

September 2017

Model Number: USBG-7DU2

www.coolgear.com

2 USBG-7DU2 – Product Manual

www.coolgear.com

Revision History

Revision Date Author Comments

1.0 07/14/2015 Coolgear Original format

1.1 10/4/2017 Coolgear New Manual Format

About this document

This product manual outlines installation and features of the USBG-7DU2 Metal 7-Port

USB 2.0 Hub – DIN RAIL Mounting Japan NEC Chip.

Scope

The scope of this manual is to give the user of the product an understanding of its use

with detailed diagrams and verbiage. The manual allows the users to apply the product

to their application.

Intended Audience

This product is intended for use in numerous industries including but not limited to

applications such as; ATM, Kiosk, Warehouse, Data Center, and others.

Product Support

[email protected]

USBG-7DU2 – Product Manual 3

www.coolgear.com

Table of Contents

1. Introduction.........................................................................................................4

1.1 Features .................................................................................................................. 4

1.2 Connector Layout.................................................................................................... 5

1.3 Hardware Installation ............................................................................................. 5

1.4 Checking the Hub Installation................................................................................. 6

1.5 Environmental Specifications ................................................................................. 6

1.6 Drawing ................................................................................................................... 6

2. Notes, Tips, Warnings, and Safety.........................................................................8

3. Supporting References .........................................................................................9

Table of Figures

Figure 1 – Connector Layout…………………………………………………………………………………………..5

Figure 2 – Device Manager Generic Hub…………………………………………………………………………6

Figure 3 - Screw Lock Cable Connection.............................................................................6

Figure 4 – Dimensional Drawing……………………………………………………………………………….…….7

Figure 5 – Input Wiring Diagram…………………………………………………………………………………….8

4 USBG-7DU2 – Product Manual

www.coolgear.com

1. Introduction

The USBG-7DU2 7-Port USB 2.0 Hub provides unique features to work in the bus-

powered mode without an external AC power adapter, it also features an external 2-pin

Terminal Block Connector for self-powered mode. The High-Speed 7-port USB 2.0 hub

provides an ideal solution to expand 7 USB 2.0 ports from one single USB 2.0 host port.

It provides a self power source (+7~24VDC from 2-pin Terminal Blocks) to provide

enough power on USB 2.0 buses.

WEIGHT .631 lbs

DIMENSIONS 5.23”(L) x 2.42” (W) x 1.43” (H)

(13.30 x 6.15 x 3.63 cm)

UPC 736983901422

WARRANTY 1 year from date of purchase

COLOR Black

DOWNSTREAM PORTS 7 USB Type-A Ports

UPSTREAM PORTS 1 USB Type-B Port

SYSTEM REQUIREMENTS Compatible with all USB enabled operating systems.

1.1 Features

•Compliant with USB Specification

Revision 2.0

•Rigid and Din Rail-Mountable Metal

Case

•Supports High-speed and or Full-speed

Packet Protocol Sequencer for

Endpoint 0/1

•

Provides 7 Downstream Facing Ports

•

Supports USB Screw Lock Mechanism

to Increase Reliability

•Supports 480Mbps, 12Mbps, and

1.5Mbps Speed

•Supports Self-powered and Bus-

powered Mode

USBG-7DU2 – Product Manual 5

www.coolgear.com

1.2 Connector Layout

Figure 1

Upstream Port Connector Self Power Input Connector

Type-B connector from upstream USB 2.0

port. It is connected from host or another

USB 2.0 hub.

This 2-pin (one pin plus voltage and the

other pin is ground) terminal block

connectors are used to connect strong

power to self-power the hub, the voltage

can be in the range from +7V to 24VDC.

1.3 Hardware Installation

1. Use static electricity discharge precautions. Remove possible static

discharge potential from any objects that the hub may come in contact with

before installation. This can be accomplished by touching a bare metal

chassis rail after you have turned off the power.

2. Apply DC power (range from +7V to 24V) to the 2-pin Terminal Block

Connector. The hub is bus-powered by the upstream USB port; this terminal

block connector is to add power to ensure enough power for the 4

downstream ports.

3. Connecting USB Host cable: The host cable is a standard A-to-B USB 2.0

cable. Please connect the type-A end connector of the cable to your

upstream USB port, then connect the type-B end connector to this hub. Since

the USB hub is plug-and-play, you don’t have to turn off your host computer

when installing the hub.

4. Connect the USB Devices to the downstream ports of this hub.

5. Mount your hub on the wall or DIN RAIL if required.

6 USBG-7DU2 – Product Manual

www.coolgear.com

1.4 Checking the Hub Installation

To check the USB hub installation in Windows device manager, please follow the

following steps:

1. Click Start

2. Click Control Panel

3. Click System

4. Click Device Manager

button

5. Double Click Universal

Serial Bus Controller

6. Double click Generic

USB Hub, the

message will show

that this device is

working properly

Figure 2

1.5 Environmental Specifications

Specification Data

Operating Temperature: 0-55°C (32 to 131°F)

Operating Humidity: 5 to 95% RH

1.6 Drawing

Figure 3

USBG-7DU2 – Product Manual 7

www.coolgear.com

Figure 4

8 USBG-7DU2 – Product Manual

www.coolgear.com

2. Notes, Tips, Warnings, and Safety

Note

In some cases, you will see an error message said that the USB Hub caused

the USB bus power over the current limit, please ignore this message since

the hub is hot plug and its power capacitor will cause a very short period of

current. It will NOT affect your USB function.

Tip N/A

Warning

Please make sure the polarity of the input power should be correctly match

the terminal block pins, otherwise it will damage the hub.

Figure 5

Safety

•Read the entire Product Manual before implementing this product for

your application. This manual contains important information about

electrical connections that must be followed for safe and proper

operation.

•Inspect the product closely for visual defects before putting it to use.

•Keep away from areas where moisture builds, this product contains

electrical components that can be damaged by moisture build up, this

can adversely affect your equipment connected to it.

•Do not disassemble the product. Handling the product’s internal

components can expose it to ESD (Electro-Static Discharge) hazards

that can affect the function of the device.

•If this product is not functioning properly, email our support team at

[email protected].

USBG-7DU2 – Product Manual 9

www.coolgear.com

3. Supporting References

Document Link

Website Product Page https://www.coolgear.com/product/metal-7-

port-usb-2-0-hub-w-din-rail-mounting-kit-

japan-nec-chip

and / or trademarks of Coolgear Inc. Coolgear Inc. are continuously improving upon its products. Product specifications are subject

to change without notice.

Altri manuali per USBG-7DU2

Indice

Altri manuali CoolGear Interruttore

CoolGear

CoolGear USBG-4PUSB2-MH Manuale utente

CoolGear

CoolGear CG-UC31PD4H Manuale utente

CoolGear

CoolGear USBG-4U3MLR2 Manuale utente

CoolGear

CoolGear CG-G1M4PHT Manuale utente

CoolGear

CoolGear CG-1600i-RM Manuale utente

CoolGear

CoolGear CG-7PU313C Manuale utente

CoolGear

CoolGear USBG-7DU2S Manuale utente

CoolGear

CoolGear CG-4P31CHUB Manuale utente

CoolGear

CoolGear USB3-16U1 Manuale utente

CoolGear

CoolGear USBG-7DU2 Manuale utente

CoolGear

CoolGear USBG-7DU2i Manuale utente

CoolGear

CoolGear USB3- 16U1 Manuale utente

CoolGear

CoolGear USBG-4U2ML Manuale utente

CoolGear

CoolGear USBNET-400i Manuale utente

CoolGear

CoolGear CG-16PU31H Manuale utente

CoolGear

CoolGear USBG-10XU1 Manuale utente

CoolGear

CoolGear USBG-3X4M Manuale utente

CoolGear

CoolGear CG-7U3DS Manuale utente

CoolGear

CoolGear USBG-7U3ML Manuale utente

CoolGear

CoolGear USBG3-3X4M Manuale utente

CoolGear

CoolGear CG-10PU3MGD Manuale utente

CoolGear

CoolGear CG-U31iS4PH Manuale utente

CoolGear

CoolGear USBG-12U2ML Manuale utente

CoolGear

CoolGear USBG-12U2ML Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente