CoolGear USBG-7DU2i Manuale utente

Sales@coolgear.com www.CoolGear.com

CoolGear 7-Port USB 2.0 Metal Hub - DIN RAIL Mount Kit NEC Chip – Installation Guide

1. Introduction: USBG-7DU2i

The High-Speed 7-port USB 2.0 hub provides an ideal solution to expand 7 USB 2.0 ports from one single USB 2.0 host

port. It provides a self power source (+7~24VDC from 2-pin Terminal Blocks) to provide enough power on USB 2.0 buses.

FEATURES:

•Compliant with USB Specification Revision 2.0

•Rigid and Wall-mountable Metal Case

•Supports High-speed and or Full-speed Packet

•Protocol Sequencer for Endpoint 0/1

•Provides 7 Downstream Facing Ports

•Supports 480Mbps, 12Mbps and 1.5Mbps Speed

•Supports Self-powered and Bus-powered Mode

•Supports USB Screw Lock Mechanism

2. Connector Layout

•Upstream Port Connector: Type-B connector from upstream USB 2.0 port. It is connected from host or another

USB 2.0 hub.

•Self Power Input Connectors: This 2-pin (one pin plus voltage and the other pin is ground) terminal block

connectors are used to connect strong power to self-power the hub, the voltage can be in the range from +7V to

24VDC.

Warning!!

Please make sure the polarity of the input power should be correctly match the terminal block pins, otherwise it will

damage the hub.

Power LED

Self Power Input

Connectors

Upstream Port

Connector

7 Downstream Ports

Sales@coolgear.com www.CoolGear.com

3. Hardware Installation

1. Use static electricity discharge precautions. Remove possible static discharge potential from any objects that

the hub may come in contact with before installation. This can be accomplished by touching a bare metal chassis

rail after you have turned off the power.

2. Apply DC power (range from +7V to 24V) to the 2-pin Terminal Block Connector. The hub was bus-powered by

the upstream USB port; this terminal block connector is to add power to ensure enough power for the 7

downstream ports.

3. Connecting USB Host cable: The host cable is either a standard A-to-B USB 2.0 cable or a screw-loc k type A-to-B

cable. Please connect the type-A end connector of the cable to your upstream USB port, then connect the type-

B end connector to this hub. Since the USB hub is plug-and-play, you don’t have to turn off your host computer

when installing the hub.

Note:

In some cases, you will see an error message said that the USB Hub caused the USB bus power over the current limit,

please ignore this message since the hub is hot plug and its power capacitor will cause a very short period of current. It

will NOT affect your USB function.

4. Connect the USB devices to the downstream ports of this hub.

5. Mount your hub on the wall or DIN RAIL if required.

4. Checking the Hub Installation

To check the USB hub installation in Windows

device manager, please follow the following steps:

1. Click Start

2. Click Control Panel

3. Click System

4. Click Device Manager button

5. Double click Universal Serial Bus

Controller

6. Double click Generic USB Hub, the

message will show that this device is

working properly.

5. Environmental Specifications

Operating Temperature:

0 to 55°C (32 to 131°F)

Operating Humidity:

5 to 95% RH

Dimensions (LxWxH):

5.23”(L) x 2.42” (W) x 1.43” (H)

(13.30 x 6.15 x 3.63 cm)

Sales@coolgear.com www.CoolGear.com

Indice

Altri manuali CoolGear Interruttore

CoolGear

CoolGear CG-G17PHHT Manuale utente

CoolGear

CoolGear USBG-4PUSB2-MH Manuale utente

CoolGear

CoolGear USBG-4U3ML Manuale utente

CoolGear

CoolGear CG-U31iS4PH Manuale utente

CoolGear

CoolGear USBG-7DU2 Manuale utente

CoolGear

CoolGear CG-7U3DS Manuale utente

CoolGear

CoolGear CG-7PU3MGD Manuale utente

CoolGear

CoolGear CG-7PU313C Manuale utente

CoolGear

CoolGear CG-G1M4PHT Manuale utente

CoolGear

CoolGear CG-10U2AML Manuale utente

CoolGear

CoolGear USBG-4U3MLR2 Manuale utente

CoolGear

CoolGear CG-7PU31HB Manuale utente

CoolGear

CoolGear USB3-16U1 Manuale utente

CoolGear

CoolGear USBG3-3X4M Manuale utente

CoolGear

CoolGear USBG-7DU2 Manuale utente

CoolGear

CoolGear USBG-4U2ML Manuale utente

CoolGear

CoolGear CG-16PU31H Manuale utente

CoolGear

CoolGear CG-10PU3MGD Manuale utente

CoolGear

CoolGear USB3- 16U1 Manuale utente

CoolGear

CoolGear USBNET-400i Manuale utente

CoolGear

CoolGear CG-4P31CHUB Manuale utente

CoolGear

CoolGear USBG-7DU2S Manuale utente

CoolGear

CoolGear USBG-7U2ML Manuale utente

CoolGear

CoolGear USBG-12U2ML Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente