Creality 3D Pad Manuale utente

Speciﬁcations and Interface Description

Installation Guide

Use the 3D Pad Mini

Bed Leveling

Creative 3D Usage

3D PAD MINI

3D Pad Mini User Manual

Firmware Upgrade,Notes and Maintenance

TF Card Slot

USB 2.0

01 Speciﬁcations and Interface Description

4.3 Inches

Screen Resolution (480*272)

Beeper

IIC Sensor Interface

3D Device Interface

Filament Sensor Interface

3D Pad Mini Filament Sensor

02 Installation Guide

Before installation Installation completed

3D Pad Mini

3D Printer

Filament Sensor

FC-FD Flat Cable

XH2.54-3P Flat Cable

Filament

Firmware Upgrade：

Notes and Maintenance:

Firmware Upgrade

Notes and Maintenance

1.3D Pad Mini working voltage 4.65~6.50V/1A

3.Before installing the 3D Pad Mini, check whether the printer matches the 3D Pad Mini reserved interface, and

then connect it to the 3D Pad Mini

10.Keep the equipment surrounding free of other debris accumulation, keep it clean and tidy, etc

5.Always turn oﬀ the power or physical switch of the 3D printing device before installing the 3D Pad Mini

6.The 3D Pad Mini must be ﬁxed to the 3D printing device

2.Please unplug the original screen before using the 3D Pad Mini

Step 1: Format the SD card not larger than 32g into fat32 format

Step 3: Insert the SD card into the 3D Pad Mini, power on, and wait for the 3D Pad Mini to read the card until

the progress bar reaches 100% and displays "successful"

Step 4: Power oﬀ the 3D Pad Mini and remove the SD card (if the SD card is not removed, the 3D Pad Mini will

repeat programming after power on). At this time, connect the 3D Pad Mini to the printer and wait for

the printer to communicate with the mainboard

Step 2: Visit the Creality oﬃcial website (https://www.creaity.com/download) > Support >Download Center,

download the mainrboard ﬁrmware corresponding to the printer and upgrade the mainboard ﬁrmware

4.The ﬁlament sensor cable is connected to the corresponding interface of the 3D Pad Mini, and the ﬁlament

is inserted into the ﬁlament sensor hole

8.3D Pad Mini ﬁrmware version 4.2.2 only supports the mainrboard V4.2.2; 3D Pad Mini ﬁrmware version 4.2.7

only supports the mainboard V4.2.7

9.Ensure that the power cord and data cable of the equipment are not damaged, and the plug or port is not

corroded and aged

04 Use the 3D Pad Mini

1.Select "Prepare" (Preparation before printing)

Step 1:

2.Enter "Prepare→ Auto Home" and the nozzle return to the starting position

3.Select "Return" (Exit to the main interface)

①

②

③

Step 2:

⑤

④

4.Select "Print" (Go to the ﬁle selection)

5.Select the ﬁle to print

Step 3:

⑥

⑦

6.Click "Settings" (To enter the preheat interface)

7.It can adjust the nozzle temperature, bed temperature, print speed, Z axis movement, nozzle fan on/oﬀ

Step 4:

⑧

⑨

9.Start printing

8.Select "return" (The preheat temperature is up to the target temperature)

Bed Leveling

①

③

②

1.Select "level" (In the main interface)

2.Select"Z+" or "Z-" to adjust the Z axis up and down movement (Optional movement precision and auto leveling)

3.Select "Return" (Exit to the main interface)

Creative 3D Usage

Software download:

How to start the software：

Open the software: Double-click "Creative3D" to open the application

Software download link: https://www.creaity.com/download

Altri manuali per 3D Pad

Indice

Altri manuali Creality Stampante 3D

Creality

Creality HALOT-MAGE Manuale utente

Creality

Creality Spider Manuale utente

Creality

Creality CR-X Pro Manuale utente

Creality

Creality CR-1000 Pro Manuale utente

Creality

Creality CR-M4 Manuale utente

Creality

Creality CR-Laser Falcon Manuale utente

Creality

Creality Ender-3 S1 Manuale utente

Creality

Creality CR-10S Pro Manuale utente

Creality

Creality Ender-3 Manuale utente

Creality

Creality CR20Pro Manuale

Creality

Creality CR-10 Max Manuale utente

Creality

Creality HALOT-ONE PLUS Manuale utente

Creality

Creality ENDER-3 V2 Manuale utente

Creality

Creality LD-006 Manuale utente

Creality

Creality ENDER-3 V2 Manuale utente

Creality

Creality Ender-3 Manuale utente

Creality

Creality HALOT-LITE CL-89L Manuale utente

Creality

Creality Laser Module Manuale utente

Creality

Creality CR-10 S5 Manuale utente

Creality

Creality CR-10 Series Manuale utente

Creality

Creality CR-10 Smart Manuale utente

Creality

Creality Sermoon V1 Manuale utente

Creality

Creality CR-10 Series Manuale utente

Creality

Creality Halot-Sky Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente