CYP CH-1106TX & RX Manuale utente
CH-1106TX & RXN
HDMI over CAT5e/6 Transmitter and Receiver Set
with IR Source Control
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 29/09/11 Preliminary Release
VS1 19/04/13 Updated format/diagrams
CONTENTS
1. Introduction................................................ 1
2. Applications............................................... 1
3. Package Contents .................................... 1
4. System Requirements................................ 1
5. Features...................................................... 2
6. Operation Controls and Functions........... 3
6.1 Transmitter Front and Rear Panels ...... 3
6.2 Receiver Front and Rear Panels.......... 4
6.3 IR Cable Pin Assignment ...................... 5
6.4 RJ-45 Pin Denition................................ 5
7. Connection Diagrams............................... 6
7.1 Typical Connection Example .............. 6
7.2 Input Connection Examples ................ 7
7.3 Output Connection Examples............. 8
8. Specications ............................................ 9
8.1 Technical Specications ...................... 9
8.2 Compatible Products ......................... 10
9. Acronyms ................................................. 10
1
1. INTRODUCTION
This HDMI over CAT5e/6 Transmitter and Receiver Set with IR Source
Control can extend HDMI signals over dual CAT5e/6 cabling up to
45m. It has the added benet of allowing the control of a source
device with your existing Remote Control with the included IR Extender
and Blaster cables.
2. APPLICATIONS
• Showroom Display and Control
• Home Entertainment systems
• Commercial/Retail Installations
• Commercial Display
• University Lecture Hall display
3. PACKAGE CONTENTS
• 1×HDMI over CAT5e/6 Transmitter with IR Source Control
• 1×HDMI over CAT5e/6 Receiver with IR Source Control
• 1×IR Extender Cable
• 1×IR Blaster Cable
• 2×5 V/1 A DC Power Supply Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source device such as a DVD/Blu-ray player and HDMI equipped
display (TV or monitor), dual CAT5e/6 cables and the source device's
remote control.
2
5. FEATURES
• HDMI, HDCP 1.1 and DVI 1.0 compliant
• Supports high denition digital video and lossless, compressed
digital audio (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio)
• Supports dual CAT5e/6 cables for Video/Audio and data/DDC
transmission
• Equalizes and recovers incoming TMDS data before re-transmitting it
in optimum quality
• Supports CEC bypass and x.v.YCC
• Includes an IR Extender and Blaster
• Supports a wide range of IR frequencies, from 30 kHz to 50 kHz
• Supports transmission of 1080p@8-bit resolution signals up to 45
meters over dual CAT5e/6 cables
• Supports HDMI input cable length of up to 6 meters and output
cable length of 10 meters at 1080p@8-bit resolution
• Supports connection to a repeater or another transmitter and
receiver set to extend the HDMI signal
Note:
1. This system was tested with CAT-6/23AWG solid core cables, results
may vary with cables of a different specication.
2. Cable distance tested with the following devices: PS3 40G, 37"
Philips 8 bit LCD TV
3. Figures provided in this manual are for reference only, actual
performance may vary depending on the source and display
devices as well as the type of cable being used.
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
DDC VIDEO
CAT6 OUTPUT
POWER 5V
HDMI INPUT
IR
Transmitter
RearFront
1 2 3 4 5
1IR TRANSMITTER
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be
controlled.
2HDMI INPUT
Connect to an HDMI source such as a DVD or Blu-ray player.
3POWER 5V
Connect the 5 V DC power supply to the unit and plug the adaptor
into an AC outlet.
4DDC OUTPUT
Connect the DDC output of the transmitter to the DDC input of the
receiver using a CAT5e/6 cable.
5VIDEO OUTPUT
Connect the video output of the transmitter to the video input of
the receiver using a CAT5e/6 cable.
4
6.2 Receiver Front and Rear Panels
VIDEO DDC
CAT6 INPUT
POWER 5V IR
Receiver
HDMI OUTPUT
RearFront
1 2 3 4 5
1VIDEO INPUT
Connect the video output of the transmitter to the video input of
the receiver using a CAT5e/6 cable.
2DDC INPUT
Connect the DDC output of the transmitter to the DDC input of the
receiver using a CAT5e/6 cable.
3POWER 5V
Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.
4HDMI OUTPUT
Connect the HDMI output to the HDMI or DVI input (with a HDMI to
DVI adaptor) of a display such as an HDTV or HD monitor.
5IR RECEIVER
Connect to the supplied IR extender cable for IR signal reception.
Ensure that remote control being used is within the direct line-of-
sight of the IR extender.
5
6.3 IR Cable Pin Assignment
3
1
3
1
2
2
Power 5 V
IR Blaster Signal
NC
IR Signal
Power 5 V
Ground
IR Extender
IR Blaster
6.4 RJ-45 Pin Denition
PIN VIDEO DDC
1 TMDS2+ SCL
2 TMDS2- N/A
3 TMDS1+ SDA
4 TMDS1- Power 5V
5 TMDS0+ GND
6 TMDS0- IR
7 TMDSC+ HPD
8 TMDSC- CEC
Altri manuali per CH-1106TX & RX
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali CYP Trasmettitore
CYP
CYP PU-USB2-KIT Manuale utente
CYP
CYP PUV-1630TXWP-EU Manuale utente
CYP
CYP PUV-1602TXWP Manuale utente
CYP
CYP PUV-1730PLTX-AVLC Manuale utente
CYP
CYP CH-2605TXV Manuale utente
CYP
CYP CH-103TX Manuale utente
CYP
CYP PUV-1210PL-TX Manuale utente
CYP
CYP CA-HDMIAT Manuale utente
CYP
CYP PU-507-KIT Manuale utente
CYP
CYP CH-507TX Manuale utente
CYP
CYP PUV-1630TXWP Manuale utente
CYP
CYP Dante AU-DTI4-TX Manuale utente
CYP
CYP PU-1H7HBTL Manuale utente
CYP
CYP PU-103 Manuale utente
CYP
CYP CA-HDMIAT Manuale utente
CYP
CYP DCT-30TX Manuale utente
CYP
CYP PU-501 Manuale utente
CYP
CYP CH-1103TX Manuale utente
CYP
CYP PUV-1710LTX-AVLC Manuale utente
CYP
CYP PUV-2100TX-AVLC Manuale utente
