CYP PU-507TX-1H Manuale utente
PU-507TX-1H
5-Play™ HDBaseT™ Transmitter with simultaneous HDMI
output (inc. PoE & single LAN, up to 100m)
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 22/10/2013 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
6.3 IR Cable Pin Assignment .......................10
6.4 D-Sub 9 Pin Denitions .........................10
7. Connection Diagram .......................... 11
8. Specications...................................... 12
8.1 CAT5e/6/7 Cable Specication ...........13
9. Acronyms............................................. 13
6
1. INTRODUCTION
The PU-507TX-1H Transmitter allows uncompressed HDMI signals and
IP data to be transmitted over a Single CAT5e/6/7 cable. This solution
has a simultaneous HDMI output enabling a local HDMI display to be
connected. This device also features full 5-Play convergence allowing the
distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-
232 and 2-way IR control functionality over the same CAT5e/6/7 cable.
These combined HDMI and control signals can be transmitted up to
lengths of 100 metres.
2. APPLICATIONS
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
1xPU-507TX-1H Transmitter
1xIR Blaster
1x3.5mm Phone Jack to RS-232 Cable
1x24V DC Power Adaptor
1xPower Cord
Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment with HDMI output connector
Display TV/Monitor with HDMI input connector
HDMI over CAT5e/6/7 Receivers with industry standard CAT5e/6/7
cables
7
5. FEATURES
Supports all v1.4 HDMI resolutions plus 4k.
Supports uncompressed video/audio up to 10.2Gbps
Common supported resolutions: HDTV: 480p, 576p, 720p, 1080i,
1080p, 1080p24, 4K; PC: VGA, SVGA, XGA, WXGA, SXGA, UXGA, WUXGA.
HDMI, HDCP, & DVI compliant
Supports HDCP repeating and CEC functions
Uncompressed data transfer over single CAT cable (100m - CAT6/7;
80m - CAT5e)
Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
5-Play™ convergence: HDMI, LAN, POE & Control (IR & RS232)
Supports 3D signals
Note:
1. This system was tested with CAT6/23AWG cables, results may vary
with cables of a dierent specication.
2. The PoE function is designed for powering compatible Receiver
units only non-PoE Receivers will need their own power supply.
Receivers of another brand may not be compatible.
3. Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI
cable and display in order for proper image displaying.
4. This device obtain the last memory function therefore, the device
will use last CAT5e/6 output port's EDID when CAT5e/6 output is not
connected to a display after power cycling.
The unit will detect CAT5e/6 output's EDID when it obtain a 4Kx2K
EDID and send out the signal accordingly to other output ports. If
the CAT5e/6 output is without a 4Kx2K's EDID the unit will detect all
output's EDID and send out the signal that all outputs can accept.
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDMI OUT HDMI IN
LAN
RS232 IN
HDMI to CAT5e/6 with LAN/IR/RS232 Transmitter
1 2 3 4
1HDMI OUT: Connect to HDMI display for instant image display or
cascade with another family type Transmitter.
2HDMI IN: Connect with source equipment such as DVD/Blu-ray or PS3
player.
3LAN: Connect to intra-net or internet service system for a total sharing
rate of 100Mbps within the link of Transmitter. Warning: DO NOT
connect this slot with any of the CAT5e/6/7 port, doing so may trigger
a power shut down and ruin the device.
4RS-232 IN: Connect to a PC/Laptop or RS-232 enabled device (with
supplied 3.5mm Phone Jack to D-Sub 9-Pin adaptor) to transmit of RS-
232 commands.
9
6.2 Rear Panel
POWER
DC 24V
CAT5e/6 OUT
IR 1
BLASTER USB LINK
IR 2
EXTENDER
1 2 3 4 5 6 7
1POWER LED: Once the power supply is connected the LED will
illuminate.
2DC 24V: Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet.
3IR 1 BLASTER: Connect with the supplied IR Blaster to blast out the
IR signal received from the Receiver side. Place the IR Blaster in direct
lineof-sight of the equipment to be controlled.
4IR 2 EXTENDER: Connect with the supplied IR Extender to receive IR
signal from Transmitter side and blast out at Receiver side. Ensure that
remote controller being used is within the direct line-of-sight of the IR
Extender.
5USB: This slot is reserved for rmware update only.
6LINK: This LED will illuminate when CAT5e/6/7 output have been
connected to the Receiver and the Receiver have connected with
display that shows image on screen.
7CAT5e/6/7 OUT: Connect this port to CAT5e/6/7 to HDMI Receiver
with CAT5e/6/7 cable to extend the signal up to 100m.
10
6.3 IR Cable Pin Assignment
3
1
3
1
2
2
Power 3.3V
IR Blaster Signal
NC
IR Signal
Power 3.3V
Ground
IR Extender
IR Blaster
6.4 D-Sub 9 Pin Denitions
Pin Dene TX / R
1 N/C
2 TxD/RxD
3 RxD/TxD
4 NC
5 GND
6 NC
7 NC
8 NC
9 NC
11
7. CONNECTION DIAGRAM
POWER
DC 24V
CAT5e/6 OUT
IR 1
BLASTER USBLINK
IR 2
EXTENDER
HDMI OUT HDMI IN
LAN
RS232 IN
HDMI to CAT5e/6 with LAN/IR/RS232 Transmitter
1.5m
60°
CAT5e/6 In
Link
IR1 Extender
IR2 Blaster
Power
7m
3m 3m
60°
m
3D TV/Display
3D TV/Display
HDMI HDMI
RS-232 Cable
Blu-ray or PS3 Player
PC
Indice
Altri manuali CYP Trasmettitore
CYP
CYP DCT-30TX Manuale utente
CYP
CYP CH-507TXBD: CH-507RXBD Manuale utente
CYP
CYP PUV-3050TX-UA Manuale utente
CYP
CYP CH-2527TX Manuale utente
CYP
CYP PU-1103 Manuale utente
CYP
CYP PU-USB2-KIT Manuale utente
CYP
CYP CH-1529TXV Manuale utente
CYP
CYP PUV-2100TX-AVLC Manuale utente
CYP
CYP PUV-1510RXWP Manuale utente
CYP
CYP CH-1107 TX Manuale utente
CYP
CYP PU-501 Manuale utente
CYP
CYP COH-RX2 Manuale di installazione
CYP
CYP CH-527TXVBD Manuale utente
CYP
CYP PUV-1605S-TXWP Manuale utente
CYP
CYP CH-1529TXPLV Manuale utente
CYP
CYP PUV-1602TXWP Manuale utente
CYP
CYP CH-1527TXPLV Manuale utente
CYP
CYP CH-103TX Manuale utente
CYP
CYP PU-305BD-TX Manuale utente
CYP
CYP CH-2538TXM-TB Manuale utente
