CYP PUV-1510RXWP Manuale utente

PUV-1510TXWP/RXWP

HDMI over CAT5e/6/7 Wallplate Transmitter with 48V PoH

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 22/06/2018 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features..................................................7

6. Operation Controls and Functions.......8

6.1 Transmitter Front Panel ........................... 8

6.2 Transmitter Rear Panel............................. 9

6.3 Receiver Front Panel...............................10

6.4 Receiver Rear Panel.................................11

6.5 IR Cable Pin Assignments .....................12

6.6 D-Sub 9-Pin Assignment.......................12

7. Connection Diagram .......................... 13

8. Specifications...................................... 14

8.1 Technical Specification ..........................14

8.1 CAT5e/6/7 Cable Specification ...........16

8.2 Timing Support Chart ............................16

9. Acronyms............................................. 17

1. INTRODUCTION

This HDMI over single Cat5e/6/7 Transmitter and Receiver set can send

uncompressed, high resolution, video/audio over a single cable up to a

distance of 100 metres. In addition to the audio and video capabilities, it

can also bi-directionally transmit RS-232 and IR control signals as well as

extending your local LAN to the display device UK 2 gang design allowing

install on AC outlet. The Receiver (PD) is powered by the 48V PoE (Power

over Ethernet) function of the Transmitter (PSE), allowing for greater

flexibility in installations.

2. APPLICATIONS

Household entertainment sharing and control

Lecture room display and control

Showroom display and control

Meeting room presentation and control

Classroom display and control

3. PACKAGE CONTENTS

1 x HDMI over CAT5e/6/7 Wall-plate Transmitter

1 x HDMI over CAT5e/6/7 Wall-plate Receiver

1 x IR Blaster

1 x IR Extender

1 x 48V / 0.83A DC power adaptor

1 x Power cable

1 x Operation Manual

4. SYSTEM REQUIREMENTS

HDMI input source equipment such as Blu-ray player, game console or

set-top box

HDMI output equipment such as an HDTV, projector or AV receiver.

Industry standard Cat6 or Cat6a cables are recommended

5. FEATURES

HDMI with 3D & 4K support. DVI signal compliant

Supports CEC bypass

Simultaneous transmission of uncompressed video, audio and data

over a single 100m/328ft Cat5e/6/7 cable

5Play™ convergence: HDMI, LAN, PoE & Control (IR & RS-2232)

Supports resolutions up to 4K@50/60Hz (YUV 4:2:0) and 21:9 aspect

ratio

Supports standard 48V PoE from Transmitter (PSE) to Receiver (PD)

Supports HDMI I/O cable distance up to 5m at 4K@50/60Hz (YUV 4:2:0)

Installation friendly wall/table mount case design

Note: 1. The standard 48V PoE function is designed for powering compatible

Receiver units only, non-PoE Receivers will need their own power supply.

Receivers of another brand may not be compatible.

2. Displaying HDMI 3D and 4K2K contents, equivalent source signal and

HDMI cable are required in order to secure the quality.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter Front Panel

OUT 1 IN 2

UPDATE

RS232 IN

POWER

LAN

LINK

HDMI IN

PUV-1510TXWP

78 6

1POWER: This LED will illuminate when the device is connected to a

power supply.

2LINK: This LED will illuminate solid when both Transmitter and

Receiver are connected and communicating with each other properly.

3LAN: Connect to an Ethernet device or to your local network as

appropriate an internet or network system.

4RS232 IN: Connect to a PC or laptop with D-Sub 9-pin male cable for

the transmission of RS-232 command.

5HDMI IN: Connect to the HDMI source equipment such as a game

console or Blu-ray player.

6IR IN 2: Connect to the supplied IR Extender cables for IR signal

reception. Ensure that remote being used is within the direct line-of-

sight of the IR Extender.

7IR OUT 1: Connect to the supplied IR Blaster cable for IR signal

transmission. Place the IR Blaster in direct line-of-sight of the

equipment to be controlled.

8UPDATE: This switch is reserved for factory use only.

6.2 Transmitter Rear Panel

CAT5e/6/7 OUT

DC 48V

1CAT5e/6/7 OUT: Connects to the Receiver unit with a single

CAT5e/6/7 cable for transmission of all data signals includes power.

2DC 48V: Plug the 5V DC power supply into the unit and connect the

adaptor to an AC outlet.

6.3 Receiver Front Panel

POWER

LAN

RS232 OUT

LINK

HDMI OUT

UPDATE

IN 1OUT 2

PUV-1510RXWP

78 6

1POWER: This LED will illuminate when the device is receiving power

via PoE (Power over Ethernet).

2LINK: This LED will illuminate solid when both Transmitter and

Receiver are connected and communicating with each other properly.

3LAN: Connect to an Ethernet device or to your local network as

appropriate.

4RS232 OUT: Connect (via D-Sub 9-pin female cable) to the device that

is to be controlled by RS-232 commands.

5HDMI OUT: Connect to an HDMI equipped display such as an HDTV or

projector for display of the HDMI input source signal.

6IR IN 1: Connect to the supplied IR Extender cable for IR signal

reception. Ensure that remote being used is within the direct line-of-

sight of the IR Extender.

7IR OUT 2: Connect to the supplied IR Blaster cable for IR signal

transmission. Place the IR Blaster in direct line-of-sight of the

equipment to be controlled.

8UPDATE: This switch is reserved for factory use only.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente