CYP EL-2600V Manuale utente

Indice

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente

EL-2600V

HDBaseT Transmitter with Trigger Control

4K UHD+HDMI/DP/VGA/USB

Driver User Guide

®

registered trademarks of HDMI licensing Administrator, Inc.

3

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

© Copyright 2020 by CYP (UK) Ltd.

All Rights Reserved.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

4

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 21/09/2020 First release

5

CONTENTS

1. Introduction...........................................6

2. DRIVER PROPERTIES..............................6

3. IP NETWORK CONNECTION...................6

4. DEVICE SPECIFIC COMMAND ................7

4.1 Set Power Reboot...................................... 7

4.2 Set Auto Switching Mode....................... 7

4.3 Set Key Lock................................................. 7

4.4 Set Route Preset......................................... 7

4.5 Set HDBT Audio Mode............................. 7

4.6 Set Audio Mixer Source Volume........... 8

4.7 Set Microphone Mode............................. 8

4.8 Set Microphone Volume ......................... 8

4.9 Set Audio Mixer Line Volume ................ 8

4.10 Set Analog Output Volume ................. 8

4.11 Set Analog Output Mute ..................... 8

4.12 Set Phantom Mode ................................ 8

6

1. INTRODUCTION

This driver has been designed to provide two-way control of the CYP 9x2

Multi-format Presentation Scaler, via RS232 or TCP/IP.

2. DRIVER PROPERTIES

The property of this driver is shown below.

Figure 1: Driver Properties

Driver Version Driver version number

Debug Mode Support use only

Debug Level Support use only

Command Delay Milliseconds a delay of millisecond between

commands

Connected To Network Shows operational status of driver

3. IP NETWORK CONNECTION

If an IP driver used, the IP address of the A/V Scaler is entered in the usual

way in connections -> Network.

7

4. DEVICE SPECIFIC COMMAND

In addition to the usual A/V Scaler functionality supported by Control4,

there are a number of device specific commands for the A/V Scaler

switching.

4.1 Set Power Reboot

Power Status Reboot

4.2 Set Auto Switching Mode

Video Output Channel HDMI or HDBT

Switching Mode OFF or Auto Switch

4.3 Set Key Lock

Key Lock Status Locked or Unlocked

4.4 Set Route Preset

Route Preset 1 to 4

4.5 Set HDBT Audio Mode

HDBT Audio Mode

1 [Source audio only]

2 [Line audio only]

3 [Microphone only]

4 [Source + Microphone]

5 [Source + Line]

8

4.6 Set Audio Mixer Source Volume

Volume(dB) -120 to 18

4.7 Set Microphone Mode

Microphone Mode Front Panel or WebGUI

4.8 Set Microphone Volume

Volume(dB) 0 to 60

4.9 Set Audio Mixer Line Volume

Volume(dB) -120 to 18

4.10 Set Analog Output Volume

Volume(dB) -103 to 24

4.11 Set Analog Output Mute

Audio Mute Status Mute or Unmute

4.12 Set Phantom Mode

Phantom Mode OFF / 5V / 48V