CYP IP-A750TX Manuale utente

IP-A750TX

Audio over IP Transmitter for IP-7000 series

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply. Please keep the

following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in use

to avoid wasting electricity.

VERSION HISTORY

REV. DATE SUMMARY OF CHANGE

v1.00 2020/09/02 Preliminary release

v1.01 2021/08/19 Typographical correction.

CONTENTS

1. Introduction..................................................1

2. Applications ..................................................1

3. Package Contents .........................................1

4. System Requirements ..................................1

5. Features.........................................................2

6. Operation Controls and Functions ..............3

6.1 Front Panel.............................................................3

6.2 Rear Panel...............................................................4

6.3 RS-232 Pinout........................................................4

6.4 WebGUI Control ...................................................5

6.4.1 System Tab ..................................................7

6.4.2 Network Tab............................................. 10

6.4.3 Functions Tab.......................................... 12

6.5 Telnet Control..................................................... 13

6.6 Telnet Commands ............................................ 14

7. Connection Diagram ..................................20

8. Specications..............................................21

8.1 Technical Specications ................................. 21

8.2 Audio Specications........................................ 22

8.2.1 Digital Audio ........................................... 22

8.2.2 Analogue Audio..................................... 22

9. Acronyms.....................................................23

1. INTRODUCTION

The inherent routing exibility of Audio over IP (AoIP) provides great

advantages over traditional audio cabling solutions while using highly

cost eective Cat.5e cable. This greatly reduces the cost of wiring large

systems and improves control convenience. This unit takes full advantage

of the core benets provided by AoIP and adds support for a selection

of dierent audio source formats, including both analogue (line in and

mic in) and digital (optical S/PDIF). This product allows you to easily

extend your audio sources to compatible audio playback devices located

anywhere on the local network.

Standard control is provided by front panel controls, WebGUI, and Telnet.

Advanced control and system integration is possible using the optional IP

Master Controller.

2. APPLICATIONS

Home Theaters

Classrooms

Lecture Halls

3. PACKAGE CONTENTS

1× Audio over IP Transmitter

1× 5V/1.2A DC Power Adapter

1× 3-pin Terminal Block

1× Operation Manual

4. SYSTEM REQUIREMENTS

Audio source equipment such as media players, video game consoles,

set-top boxes, or PCs.

A Gigabit Ethernet switch with“IGMP snooping”enabled is required for

multicast support.

An active network connection from a switch or router that supports

PoE (802.3af) to power the unit is highly recommended.

5. FEATURES

Analogue inputs: 1×Mic input, 1×Line input

Digital input: 1×Optical input

Audio and RS-232 extension over TCP/IP in unicast (point-to-point) or

multicast (single-to-many) modes

Extension of AoIP signals can be further extended (up to 100m per

segment) by using gigabit network switches.

Gain control for the microphone input

Compatible with the IP Master Controller to allow integration with

existing compatible TCP/IP video matrix networks.

Field-upgradable rmware

May be powered directly by Power over Ethernet (PoE) when

connected to a Gigabit Ethernet switch that provides PoE (802.3af)

Standard control is provided by front panel controls, WebGUI, and

Telnet. Advanced control and system integration is possible using the

optional IP Master Controller.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

PWR

LINE

MIC

LINK MUTE

AUDIO

SELECT

MUTE

GAIN.

OPT.

3456

1PWR LED: This LED will illuminate to indicate the unit is on and

receiving power.

2LINK LED: While the transmitter is attempting to establish a network

connection the LINK LED will ash. When the transmitter has

established a stable connection the LINK LED will illuminate solidly.

3OPT/LINE/MIC LEDs: The illuminated LED indicates which source is

currently selected.

4MUTE LED: This LED will illuminate when audio output is muted.

5MUTE Button: Press to toggle between muting and unmuting the

audio output.

6GAIN -/+ & AUDIO SELECT Knob: Turn this knob to increase or

decrease the audio gain of the microphone input. Press the knob in to

sequentially switch through the available inputs.

6.2 Rear Panel

OPTICAL LINE

MIC

RS-232

LAN(POE)

TX RX

DC 5V

12356

1OPTICAL IN Port: Connect to the optical audio output of a device

such as a media player or game console using an appropriate optical

cable.

2LINE IN Port: Connect to the analogue stereo output of a device such

as an audio player or PC.

3MIC IN Port: Connect to the analogue output of a microphone.

4RS-232 3-pin Terminal Block: Connect to a PC, laptop, or other serial

control device with a 3-pin adapter cable for the extension of RS-232

signals to a compatible receiver.

5LAN(POE) Port: Connect via a Gigabit Ethernet switch to compatible

receiver(s) to transmit data, and to a PC/laptop to control the unit via

WebGUI.

Note: This unit can be powered directly by the connected Gigabit Ethernet

switch if it provides PoE (802.3af).

6DC 5V Port: Plug the 5V DC power adapter into the unit and connect

it to an AC wall outlet for power. (Optional if powered by PoE)

6.3 RS-232 Pinout

RxD

GND

TxD

3-pin

Terminal Block

6.4 WebGUI Control

Device Discovery

Please obtain the“Device Discovery” software from your authorised dealer

and save it in a directory where you can easily nd it.

Connect the unit and your PC/Laptop to the same active network and

execute the“Device Discovery” software. Click on“Find Devices on

Internet” and a list of devices connected to the local network will show up

indicating their current IP address.

Note: This unit defaults to Auto IP mode. The current IP address can be veried

using the Device Discovery software.

By clicking on one of the listed devices you will be presented with the

network details of that particular device.

1) IP Mode: If you choose, you can alter the static IP network settings for

the device, or switch the unit into DHCP mode to automatically obtain

proper network settings from a local DHCP server. To switch to DHCP

mode, please select DHCP from the IP mode drop-down, then click

“Save” followed by “Reboot”.

Indice

Altri manuali CYP Trasmettitore

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente