CYP CH-1107 TX Manuale utente

CH-1107 TX

HDMI v1.3 over ONE CAT6

HDMI Transmitter

Operation Manual

CH-1107 TX

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes

no commitment to update or to keep current the information

contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

Version 1.0 November 2010

Trademark Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.

 To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide

ventilation.

Revision History

Version No Date Summary of Change

VR0 20101124 Preliminary Release

Table of Contents

1. Introduction..................................................................................1

2. Applications.................................................................................1

3. Package Contents ......................................................................1

4. System Requirements..................................................................1

5. Features........................................................................................2

6. Specifications ..............................................................................3

7. Operation Controls and Functions.............................................4

7.1 Front Panel....................................................................4

7.2 Rear Panel....................................................................5

8. Connection and Installation .....................................................6

9. Acronyms...................................................................................7

1. Introduction

The HDMI 1.3 transmitter over ONE CAT6 is a tool for extending your HDMI

signal over long distances to a compatible display. Instead of using

expensive HDMI cables, your existing CAT6 cables/sockets can be utilized to

perform advanced functions like transferring Deep Color (12 bits/color) video

and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio) digital audio, with a bandwidth up to 225MHz. The HDMI 1.3

Transmitter and receiver, over ONE CAT6 extender is your substantial HDMI

extender tool.

2. Applications

 Distribute HDMI signals over long distances

 Showroom display

 Hypermarket display

 Lecture room display

3. Package Contents

 HDMI v1.3 Transmitter x 1

 5V DC Power Supply adaptor x 1

 Operation Manual x 1

4. System Requirements

Input HDMI source equipment and output HDMI over CAT6 receiver one

CAT6 cable.

5. Features

 HDMI 1.3, HDCP 1.1 and DVI1.1 compliant.

 Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/

color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and

DTS-HD Master Audio) Digital audio .

 Uses one CAT6 cable for data/DDC transmission.

 Equalizes and recovers incoming TMDS data before re-transmitting it in

optimal quality regardless of the incoming signal quality.

 Cable testing showed that with 1080p 8bit or 12bit resolution the HDMI

input source can be 20 meters away.

 When transmitting a signal in 1080p 8bit resolution the CAT6 operating

distance is 45 meters, and when the signal is in 12bit resolution the CAT6

operating distance is 10 meters.

 Supports xvYCC

6. Specications

Video Bandwidth 2.25MHz/6.75Gbps

Transmitter

Input/Output Ports 1 x HDMI Female port/1 x CAT6

Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certied)

ESD Protection Human Body Model: ± 8kV (air-gap discharge)

± 4kV (contact discharge)

Dimensions (mm) 78.5 (W) X 102 (d) X 30 (H) / Tx

Weight(g) 182 / Tx

Chassis Material Aluminum

Silkscreen Color Silver

Power Consumption TX: 3.5W

Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F

Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F

Relative Humidity 20~90% RH (non-condensing)

7. Operation Controls and Functions

7.1 Front Panel

CH-1107TX

① ②

DC 5V

HDMI INPUT

① HDMI INPUT: This slot is where you connect the HDMI or DVI output

port of your source equipment such as DVD/Blu-ray players or Set-top-

boxes with an HDMI cable or link up with another receiver unit from the

same family to extend a signal over long distances.

② DC 5V: This is where you plug the 5V DC power supply into the unit

and connect the adaptor to an AC outlet.

7.2 Rear Panel

CH-1107TX

②①

TV/STD 10 Bit CAT6 OUT

EDID

8 Bit 12 Bit

① EDID Control Switcher: Switch the EDID between STD and TV. Switch to

STD to use the built-in EDID or switch to TV to use the TV’s EDID. The default

factory setting is TV, leave as is when the display is working properly.

Note: 1.When EDID is switched to STD the unit will use its built-in EDID which

supports:

Video → 1080p 8-bit, 10-bit or 12-bit (max)

Audio → PCM 2CH

2.The EDID selection will only be activated when the unit is re-plugged

and powered on.

② CAT6 OUT: Connect the CAT6 output of the transmitter with the CAT6

input of the HDMI over single CAT6 receiver.

Note: A. This system was tested with CAT6/23AWG/UTP/568B cables,

so if using cables of another type, results may vary.

B. Cable distance tested with PS3 120G & 40" Samsung LED 12 bit LCD

TV.

C.The gures provided in this manual are for reference only; actual

performance may depend on the source and display used along

with the type cable.

8. Connection and Installation

DVD LCD TV

CH-1107TX HDMI over Single

CAT6 Receiver

20M/8-bit

HDMI

Cable

HDMI

Cable

HDMI

CAT6

Cable

45M/8-bit

Altri manuali per CH-1107 TX

Indice

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente